HDD question (Solved)

Discussion in 'Building a new PC' started by proxpilot, Dec 7, 2009.

  1. proxpilot

    proxpilot Member

    Joined:
    Dec 20, 2008
    Messages:
    78
    Likes Received:
    0
    Trophy Points:
    16
    Hey guy's i recently picked up a 1TB Western Digital HDD. But my PC is not picking it up for some reason. I also have an 80G that i have my Windows installed on. If i go to the Device manager i see my 1TB and i go to it and it's enabled. But if i go under My Computer i only see the 80G. I also go into my BIOS and see both HDD's. anyone have any idea why this is?
     
  2. Mez

    Mez Active member

    Joined:
    Aug 12, 2005
    Messages:
    2,895
    Likes Received:
    9
    Trophy Points:
    68
    Is is 'Fdisked' then formatted? They have to be set up using software so you can specify what file allocation system you want. Then it needs to be formatted. The software either came in the box or you can download it from their site under support/downloads or something like that.
     
  3. proxpilot

    proxpilot Member

    Joined:
    Dec 20, 2008
    Messages:
    78
    Likes Received:
    0
    Trophy Points:
    16
    nothing came in the box. I went to Western Digitals website and i only found a Diagnostic program for it.
     
  4. Deadrum33

    Deadrum33 Active member

    Joined:
    Jul 23, 2005
    Messages:
    1,930
    Likes Received:
    0
    Trophy Points:
    66
    Sounds like you are running windows using the term device manager so Click your start button on your taskbar.
    RIGHT CLICK on computer and select manage. Select Disk Management and can you see your disk on the list? How about the colored bar charts, does it see an extra partition?
    Mez is correct about setting up the drive with Fdisk/format (same thing), incorrect about needing special software because windows does just fine. You will format, then initialize your disc using disk management in the computer management console. Or see this webpage http://computershopper.com/hard-drives-burners/howto/install-a-new-hard-drive-in-five-easy-steps specifically step 5.

    ___EDIT___Didn't think to ask, what windows version and how old is your computer? Some older motherboards and older OS cant see full 1TB
     
    Last edited: Dec 7, 2009
  5. Mez

    Mez Active member

    Joined:
    Aug 12, 2005
    Messages:
    2,895
    Likes Received:
    9
    Trophy Points:
    68
    Then go to Seagate, and DL Maxtor Blast. I could have sworn DataLife guard would set up disks but I just looked and couldn't find it. It is a nice utility and will do WDs.
     
  6. cee43ja1

    cee43ja1 Active member

    Joined:
    Sep 14, 2007
    Messages:
    4,134
    Likes Received:
    1
    Trophy Points:
    68
    bring up a run box, and use diskmgmt.msc to find the 1TB drive and format it from there; it should be RAW.
     
  7. proxpilot

    proxpilot Member

    Joined:
    Dec 20, 2008
    Messages:
    78
    Likes Received:
    0
    Trophy Points:
    16
    K i see the disc it says Unallocated. everything is pretty new it's a little under a year old. ASUS P5Q mobo do i got to click create new partition?
     
    Last edited: Dec 7, 2009
  8. Deadrum33

    Deadrum33 Active member

    Joined:
    Jul 23, 2005
    Messages:
    1,930
    Likes Received:
    0
    Trophy Points:
    66
    Yep new partition. From here just follow step 5 of the website I linked.
    Primary partition, ntfs file quick format, you will be golden.
     
  9. proxpilot

    proxpilot Member

    Joined:
    Dec 20, 2008
    Messages:
    78
    Likes Received:
    0
    Trophy Points:
    16
    got it thanks
     
  10. Deadrum33

    Deadrum33 Active member

    Joined:
    Jul 23, 2005
    Messages:
    1,930
    Likes Received:
    0
    Trophy Points:
    66
    No problem.
     

Share This Page