Recently, i've been trying to put about 39 videos onto a DVD using nerovision express 2. However. after it's done transcoding the videos (after 4 hours of transcoding......heh) it gives an error message (something about power or something i believe) and then just closes. the types of videos are mostly winamp and two are windows media. if nothing, then what else would be a good program to use??? thanks
O2K Welcome and is the error code a " Power Calibration error". If not then we need exact error codes if we are going to be able to assist you, so try to write them down exactly if you can.
well, since this is'nt my computer, my responses won't as quick. but my friend copied the details and what-not, but since it is fricken HUGE!!!. i only copied the last bit, but it did have a power calibration report.. anyways this is what i copied down. [21:21:35] NeroVision 9:21:18 PM #22 CDR -1106 File Writer.cpp, Line 304 [21:21:35] NeroVision Power calibration error [21:21:35] NeroVision [21:21:35] NeroVision 9:21:19 PM #23 Text 0 File ThreadedTransfer.cpp, Line 229 [21:21:35] NeroVision all writers idle, stopping conversion [21:21:35] NeroVision [21:21:35] NeroVision 9:21:19 PM #24 Text 0 File ThreadedTransfer.cpp, Line 223 [21:21:35] NeroVision conversion idle, stopping reader [21:21:35] NeroVision [21:21:35] NeroVision 9:21:33 PM #25 SCSI -1106 File Cdrdrv.cpp, Line 1188 [21:21:35] NeroVision SCSI Exec, HA 1, TA 1, LUN 0 [21:21:35] NeroVision Status: 0x04 (0x01, SCSI_ERR) [21:21:35] NeroVision HA-Status 0x00 (0x00, OK) [21:21:35] NeroVision TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) [21:21:35] NeroVision Sense Key: 0x03 (KEY_MEDIUM_ERROR) [21:21:35] NeroVision Sense Code: 0x73 [21:21:35] NeroVision Sense Qual: 0x03 [21:21:35] NeroVision CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00 [21:21:35] NeroVision Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E [21:21:35] NeroVision 0x00 0x00 0x00 0x00 0x73 0x03 [21:21:35] NeroVision [21:21:35] NeroVision 9:21:33 PM #26 Phase 127 File APIProgress.cpp, Line 273 [21:21:35] NeroVision Generating DVD high compatibility borders [21:21:35] NeroVision [21:21:35] NeroVision 9:21:33 PM #27 CDR -1106 File WriterStatus.cpp, Line 164 [21:21:35] NeroVision Power calibration error [21:21:35] NeroVision [21:21:35] NeroVision 9:21:33 PM #28 TRANSFER -24 File WriterStatus.cpp, Line 164 [21:21:35] NeroVision Could not perform end of Disc-at-once [21:21:35] NeroVision [21:21:35] NeroVision 9:21:33 PM #29 Phase 38 File APIProgress.cpp, Line 273 [21:21:35] NeroVision Burn process failed at 2.4x (3,324 KB/s) [21:21:35] NeroVision [21:21:35] NeroVision Existing drivers: [21:21:35] NeroVision File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.34, size=23420 bytes, created 3/7/2004 7:30:35 PM [21:21:35] NeroVision File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 4:02:00 AM (Prassi/Veritas driver for win 2K) [21:21:35] NeroVision Registry Keys: [21:21:35] NeroVision HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) but yes, the error code is a "Power Calibration error" so, would i be able to fix it, or does each video need to be "made" or transcoded a certain way???
O2K When the DVD burner starts it reads a small amount of Data that is on the disk and this enables the burner to calibrate itself to the blank media. A Power Calibration error is usually caused by: 1.Bad Media- Use good quality blank media 2 Burner laser need to be cleaned. Get a cleaning disc. 3 The DVD-Burner has died. This usually is not the problem but it can happen
well, I have used 3 different types of media (maxell dvd+r compusa dvd-r and tdk dvd-r), and they all have given the same message. anything else that might be wrong???
I take it the firmware is flashed to current version. If not flash to current version. Are you using the current most UTD version of Nero. It has been reported in some threads on another forums about Nero causing this problem Current version Of NVE is 2.1.2.16 The only other suggestion is to try branded Riteks or Verbatim
well, we are using the most current version of nero, but the thing is that we have got it to work 4 differnet times, but then it supposedly does'nt work agian. I got a verbatim brand +RW so i'll try that suggestion
