I have a Pioneer DVD Burner DVR - 212 less than 12 months old and have recently tried to burn a dual layer disk without luck. I am using Nero 7 Ultra Edition. It seems to burn the first layer fine without fault. I have no problems burning single layer disks. Using the same DL disks I can burn utilising my laptop without a problem. I have placed my report below that Nero generated when it faulted. Any assistance will be greatly appreciated as I tired of creating coasters 1C82-0000-19E5-MAAX-4006-3484-**** Windows XP 6.0 IA32 WinAspi: - NT-SPTI used Nero Version: 7.9.6.0 Internal Version: 7, 9, 6, 0 Recorder: <PIONEER DVD-RW DVR-212> Version: 1.09 - HA 1 TA 0 - 7.9.6.0 Adapter driver: <IDE> HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <PIONEER DVD-RW DVR-212 >Version: 1.09 - HA 1 TA 0 - 7.9.6.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === === CDRom-Device-Map === PIONEER DVD-RW DVR-212 F: CdRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2045MB (2094864kB) Free physical memory: 320MB (328080kB) Memory in use : 84 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 8.4.2008 Burn DVD Image 6:20:56 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 6:20:56 PM #2 Text 0 File Burncd.cpp, Line 3508 Turn on Disc-At-Once, using DVD media 6:20:56 PM #3 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 4173823 (927:30.73, 8151MB) Last address to be written: 3700113 (822:14.63, 7226MB) 6:20:56 PM #4 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 6:20:57 PM #5 Text 0 File DlgWaitCD.cpp, Line 2964 Recorder: PIONEER DVD-RW DVR-212, Media type: DVD+R9 Double Layer Disc Manufacturer ID: RITEK, Media Type ID: S04, Product revision number: 66 Disc Application Code: 0, Extended Information Indicators: 3 6:20:57 PM #6 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 6:20:57 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 3700114 (3700114) = #3700114/822:14.64 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3700114 blocks [F: PIONEER DVD-RW DVR-212] -------------------------------------------------------------- 6:20:57 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [F: PIONEER DVD-RW DVR-212] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7577833472, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 3700114 | 3700114 | 0x00 3700114 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 6:20:57 PM #9 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 6:20:57 PM #10 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 6:20:57 PM #11 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 6:20:57 PM #12 Text 0 File Burncd.cpp, Line 4413 Cache writing successful. 6:20:57 PM #13 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 6:20:57 PM #14 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 4x (5,540 KB/s) 6:20:57 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 6:20:57 PM #16 SPTI -1066 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24 Buffer x079a0d40: Len x648 6:20:57 PM #17 Text 0 File DVDPlusDualLayer.cpp, Line 494 Disc finalized, LBA total Image size: 3700114 (7226MB), Last LBA L0: 1850063 (3613MB) 6:21:25 PM #18 SPTI -1066 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 21 08 04 00 00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24 Buffer x079a0d40: Len x804 6:21:25 PM #19 Text 0 File DVDPlusDualLayer.cpp, Line 659 L0 Data Zone Capacity set to 1850064 (1C3AD0h, 3613MB) -> OK, confirmed setting 6:21:25 PM #20 CDR -1205 File DVDPlusDualLayer.cpp, Line 686 Burning Layer 1 6:21:25 PM #21 Text 0 File DVDPlusDualLayer.cpp, Line 696 Start writing layer 1 at address 0 (0h) Recording mode: unknown Recording Mode 6:21:25 PM #22 Text 0 File Cdrdrv.cpp, Line 9872 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R DL (14), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable Linear Density: 0,293 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 1F3ACF h (LBN: 1C3ACF h, 3613 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: RITEK... Media type ID: S04 Product revision number: 66 Number of Physical format information bytes in use in ADIP up to byte 63: 64 Media Specific [16..63]: 00 00 03 52 49 54 45 4B - 00 00 00 53 30 34 42 40 ...RITEK...S04B@ 25 25 37 10 00 2C 6C 00 - 2C 6C 20 1F 0C 0C 14 14 %%7..,l.,l...... 02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................ 6:21:25 PM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24 Buffer x079a1600: Len x648 6:21:25 PM #24 Text 0 File DVDPlusRW.cpp, Line 675 Start write address at LBA 0 DVD high compatibility mode: Yes 6:21:25 PM #25 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 6:33:04 PM #26 CDR -1206 File DVDPlusDualLayer.cpp, Line 1969 Burning Layer 2 6:33:04 PM #27 Text 0 File DVDPlusDualLayer.cpp, Line 1980 Perform layer 1 to 2 jump before writing at address 1850064 (1C3AD0h) 6:33:24 PM #28 SPTI -1135 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 1C 3D E0 00 00 20 00 00 00 Sense Area: 0x71 00 03 00 1C 3A F0 0E 00 00 00 00 0C Buffer x0a7b5280: Len x10000 0x00 00 01 BA 44 BD A5 53 4C 69 01 89 C3 F8 00 00 0x01 E0 07 EC 81 00 00 01 56 8F AE 21 30 9A 77 D2 0x50 9D EA D3 6A 04 A4 4D 74 24 18 19 9D 7C 9C 73 6:33:24 PM #29 CDR -1135 File Writer.cpp, Line 303 Write error F: PIONEER DVD-RW DVR-212 6:33:40 PM #30 SPTI -1104 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1104) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x15 Sense Qual: 0x02 CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00 Sense Area: 0x71 00 03 00 1C 3A F0 0E 00 00 00 00 15 02 6:33:44 PM #31 SPTI -1176 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x04 CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 72 04 6:33:44 PM #32 Text 0 File DVDPlusRW.cpp, Line 935 EndDAO: Last written address 1850848 6:33:44 PM #33 CDR -1104 File WriterStatus.cpp, Line 162 Positioning error F: PIONEER DVD-RW DVR-212 6:33:44 PM #34 TRANSFER -24 File WriterStatus.cpp, Line 162 Could not perform end of Disc-at-once 6:33:44 PM #35 Phase 38 File dlgbrnst.cpp, Line 1762 Burn process failed at 4x (5,540 KB/s) 6:33:44 PM #36 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 6:33:47 PM #37 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed 6:33:47 PM #38 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
update firmware for drive... http://forum.rpc1.org/dl_firmware.php?download_id=2365 update motherboard ide drivers - (you have no DMA links showing?) update nero maybe install ASPI layer from adaptec - v4.7
If you are not using Verbatim 2.4x or 4x, you are taking a chance burning dual layer. http://www.videohelp.com/dvdmedia?dvdmediadvdridsearch=RITEK...S04 http://www.videohelp.com/dvdmedia?dvdmediadvdridsearch=MKM.....001 edit Turn some stuff off before you run out of memory. Imgburn is a better with dual layer burning.
