help flashing krytview

howye lads.just got my new kryptview a750.can anybody help me flash i had a search but just found a tutorial for the arnet.is the same loader used with both of these.thanks

 

Hi yes uses same loader for both units. Make sure the mains switch is off from the back and only switch on after pressing start on the downloader.

 

and do i do a scan for the channels before i load the new firmware or just put the firmware straight on it thanks.didnt get any paperwork

 

put the firmware on first then scan. I am sure I have seen how to flash on one of the kv threads

 

halpinio download the kyptview_arnet_loading_instructions[1].zip in eamos library great guide and very easy to follow.

 

will do.cheers lads.thanks for the help

 

hi lads sorry to bother you again.i have put the new firmware on the box and done a scan but its only picking up about 20 channels.Dave,setanta ireland and a few disney channels.im on nthell dublin.thanks

 

did you use the legacy option ?

 

sorry mate i havnt a clue bout this box and i got no paperwork for it.i did search the forum but i really dont know what people are talking about.sorry not very good with this stuff

 

Im just waiting for one to arrive,does anyone know if the software will work using vista?

 

when you go to scan, it tells you to wait, and then shows a couple of different options for scanning, 1 of them is something like NTL legacy Dublin, scan on that and you should get everything.

 

hi had a look theres nothing about legacy.its the new kryptview a750.

 

I think I would need to be in front of my own one to run through the exact steps to use when scanning. Does it do a TP scan first ?

 

He must not be in Dublin N*L if he's not getting dublin legacy.. I think after a tp search it lists the local providers in each specific area.. if in Dub N*L he should pick up abou 19 tp and get every channel..regards

 

no dont think so.since it found the 20 channels it doesnt even go through a scan.just says done.what is a tp scan should i do that?it also says channel search type.free,scrambled,all,network.

 

Pressing green it should search for all local tp's .. this needs to be done first in each area

 

ill give that a go now

 

halpinio came across this on another thread it might help you out
When you flash it you should see a menu.

Go to the bottom option

provider on top choose ntl

leave the rest alone

Press green button on remote

Wait till you get next option

Choose legacy channels at the top

Press ok then let it do its work

Then exit out when finished

Let it update & thats it.

(courtesy of fergus)

 

Sorry thought that he was on NTL dublin as he said 'im on nthell dublin'.

 

thanks a million lads got that goin cheers again