I have Nero 6 and everything worked fine before i updated my drive. I just updated so that it can be more compatible and less likely to have failed disk writes. This is my first time updating it. I got the update from the manufacturers website: http://us.liteonit.com/us/index.php?option=com_wrapper&Itemid=153. Does anyone know how I can fix this? I think once I have updated it i cant make it go back to the previous firmware? I just bought a 50 pack dvd-r and really want to fix this so that i can burn again. thanks. The error shows right after caching, it doesn't even start burning. Here's the log: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b (Nero Express) Recorder: <LITE-ON DVDRW SOHW-1213S>Version: TS0J - HA 1 TA 1 - 6.6.0.16 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 2 TA 0 - 6.6.0.16 Adapter driver: <Vax347s> HA 2 === Scsi-Device-Map === DiskPeripheral : ST360012A atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1213S atapi Port 1 ID 1 DMA: On CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 2 ID 0 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW SOHW-1213S D: CDRom0 SCSIVAX DVD/CD-ROM F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 39845888 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 246MB (252908kB) Free physical memory: 45MB (46608kB) Memory in use : 81 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.1.2008 ISO compilation 10:42:15 PM #1 Text 0 File Isodoc.cpp, Line 6356 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:42:15 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 10:42:15 PM #3 Text 0 File Writer.cpp, Line 122 Writer LITE-ON DVDRW SOHW-1213S running 10:42:15 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:42:15 PM #5 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 10:42:15 PM #6 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2225167 (494:28.67, 4346MB) 10:42:15 PM #7 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 10:42:15 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: LITE-ON DVDRW SOHW-1213S, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 10:42:15 PM #9 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:42:15 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2225168 (2225168) = #2225168/494:28.68 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2225168 blocks [LITE-ON DVDRW SOHW-1213S] -------------------------------------------------------------- 10:42:15 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [LITE-ON DVDRW SOHW-1213S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4557144064, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2225168 | lead-out | 1 | 0x41 | 0x00 10:42:15 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 10:42:15 PM #13 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 10:42:15 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 10:42:15 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 10:42:15 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:42:15 PM #17 Text 0 File DVDR.cpp, Line 2379 Recording mode: Sequential Recording Mode 10:42:15 PM #18 Text 0 File Mmc.cpp, Line 21708 Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON 10:42:15 PM #19 Text 0 File DVDR.cpp, Line 2534 Start write address at LBA 0 DVD high compatibility mode: Yes 10:42:15 PM #20 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:42:17 PM #21 SCSI -1046 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x08F00000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 10:42:17 PM #22 CDR -1046 File Writer.cpp, Line 311 Illegal disc 10:42:17 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:42:18 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 10:42:18 PM #25 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was -1 10:42:18 PM #26 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 6:59:44 PM (Adapter driver for rec) File 'Drivers\Vax347s.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 4/30/2004 9:33:00 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I hate to be the bearer of bad news but these are horrible discs and more than likely will be the cause of the error....you may find a few good ones in the spindle of 50 you have but then on the other hand you may be lucky and find quite a few good ones....they are very hit and miss.
Oh that one was the HP DVD-R, I also tried Verbatim DVD-R MIT and the error still comes up. I dont think its the dvd-r disks that causing it. i think the firmware messed it up but i dont know how to fix it.
Set you burner drive as a master instead of a slave. If it doesn't fix it, go back to an older firmware.
I put it on master but it still says the same illegal disk error. How do I go back to an older firmware? Here's the log after putting it on masters and using Verbatim DVD-R: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b (Nero Express) Recorder: <LITE-ON DVDRW SOHW-1213S>Version: TS0J - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 2 TA 0 - 6.6.0.16 Adapter driver: <Vax347s> HA 2 === Scsi-Device-Map === DiskPeripheral : ST360012A atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1213S atapi Port 1 ID 0 DMA: On CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 2 ID 0 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW SOHW-1213S D: CDRom3 SCSIVAX DVD/CD-ROM F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 39845888 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 246MB (252908kB) Free physical memory: 56MB (57424kB) Memory in use : 77 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 25.1.2008 ISO compilation 3:39:13 PM #1 Text 0 File Isodoc.cpp, Line 6356 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 3:39:13 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 3:39:13 PM #3 Text 0 File Writer.cpp, Line 122 Writer LITE-ON DVDRW SOHW-1213S running 3:39:13 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 3:39:13 PM #5 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 3:39:14 PM #6 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2225167 (494:28.67, 4346MB) 3:39:14 PM #7 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 3:39:14 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: LITE-ON DVDRW SOHW-1213S, Media type: DVD-R Disc Manufacturer: MCC 03 - RG20 Disc Application Code: 64, Disc Physical Code: 193 3:39:14 PM #9 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:39:14 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2225168 (2225168) = #2225168/494:28.68 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2225168 blocks [LITE-ON DVDRW SOHW-1213S] -------------------------------------------------------------- 3:39:14 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [LITE-ON DVDRW SOHW-1213S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4557144064, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2225168 | lead-out | 1 | 0x41 | 0x00 3:39:14 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 3:39:14 PM #13 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 3:39:14 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 3:39:14 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 3:39:14 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 3:39:14 PM #17 Text 0 File DVDR.cpp, Line 2379 Recording mode: Sequential Recording Mode 3:39:14 PM #18 Text 0 File Mmc.cpp, Line 21708 Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON 3:39:14 PM #19 Text 0 File DVDR.cpp, Line 2534 Start write address at LBA 0 DVD high compatibility mode: Yes 3:39:14 PM #20 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 3:39:15 PM #21 SCSI -1046 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x08F50000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 3:39:15 PM #22 CDR -1046 File Writer.cpp, Line 311 Illegal disc 3:39:15 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 3:39:15 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 3:39:15 PM #25 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was -1 3:39:15 PM #26 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 6:59:44 PM (Adapter driver for rec) File 'Drivers\Vax347s.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 4/30/2004 9:33:00 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Same way you updated to the new firmware. You can find the older versions here: http://forum.rpc1.org/dl_firmware.php?download_id=1862
