Help! I've made 5 coasters (burn fail, write errors) so far - DVDShrink, Nero 6, Sony DRU510A, Philips DVD+R

I'm all pumped up about my new DVDR setup but can't seem to get thru 100% of a burn. I've tried just backing up data files and it Nero craps out anywhere from 10% in to it all the way up to about 80% of it. I'm trying to back up a DVD, so I used dvdshrink (that was easy), then Nero Burning Rom (that was easy) and the burn has failed every time. I've even tried backing up data files, that failed too. This is supposed to be good media (I think) and a good drive (I hope). Anyone have any tips?

Oh, I tried DVD X Copy and that got a write error too

 

I'm a newbie as well but your problem sounds like buffer overrun. Try not having any other programs running while you are writing, and turn off your screen saver. Also something I have found useful is Nero 6 has the ability to mount an "image drive". It creates a virtual drive that you write an image to. If there are any problems with the DVD you are writing they will show up here before you create a coaster. DVD+Rs aren't that cheap yet.

 

I will have to try that (although I have a decent computer/memory) and had nothing really running.... Just burnt my 6th coaster w/ Recordnow MAx Dammit! How do I mount an image drive in Nero?

 

What other video programs do you have installed? Roxio can cause problems with Nero.
Just a thought,
Frank

 

bluearch,

When almost everyone is doing everything perfect we don't usually hear from him or her so I'll try not to get into anything you have no trouble with -

First you have to decide whether you wish to back up a DVD or a Data disc !

Second - Are you running Roxio ? With all those errors when you are doing everything right - that could be a problem. Rid yourself of Roxio.

Third - If you don’t know if your media is any good then it probably is your media - top-of-the-shelf Name Brand.

Fourth - without getting into a disagreement with you, if there is even a remote chance that DVDShrink wasn't all that easy and perhaps the r4emote possibility that even you may have possibly made a mistake with Nero (that was easy) ROM then we might be able to help you with your applications.

Nothing personal but as a general rule, when DVDShrink is used correctly and the same with Nero - the burns run in the close to 100 percent perfect 99.999% of the time.

Hoping to help -

"P"

 

Hummmm, everyone's a writtin' while I'm pluckin' here -

Hi ya Frank ;-))

 

I shall rid myself of Roxio - I hope that is the culprit!

I know it's not the media - it's name brand good stuff.

Although can Roxio screw up Nero, DVD X COPY, AND Recordnow Max? That seems weird to me...

I'll post my results tomorrow. Thanks to all for your suggestions. HOpefully I won't lose another DVD+R

 

Hi bluearch,
Roxio conflicts with a lot of different programs. If you do some research here you may find a post that discusses using regedit to make some changes. You may want to go to the AD software forum and ask.
I think you will be happier with just Nero though.

Getting as far as you have means you will be successful very soon.

That must be the problem cause Pete and I both thought of it at the same time!

Good luck,
Frank

 

I was also told that some problems I was having were due to multiple recording software conflicts but I solved my problems without uninstalling anything. I think as long as you don't have any memory resident portions of the programs like incd or directcd running you are ok, just having the program on your drive shouldn't effect anything. Use msconfig to delete any mem resident programs you don't need including any writing software that has installed some sort of "quickstart" resident. Its amazing how many programs want to install themselves in memory and the average computer user doesn't know the effect they have on performance or how to get them out.
I will say that my only DVD coaster was produced by Roxio but it was my error. I prefer it for making music CDs but unless you are making a data DVD its no good for them.
Also, either try my Nero Image drive suggestion or use DVD-RWs until you figure out the problem. Sounds like you have enough coasters for your next party at this point.
One other thought, does your writer have smartburn or a large buffer? If not you might want to try slowing down your write speed and see what that does.

 

you might want to check that your aspi layer is working correctly

 

Nero has a tool for registry and driver compatibility checks:

http://www.nero.com/us/631938356417810.html
_X_X_X_X_X_[small]motorcycle racer
computer newbie
Sony VAIO
Suzuki GSXR1000[/small]

 

I spent 2 weeks and about 20 DVD's before I got my combination right (see post in this section titled "A winning combination").

Don't give up. I finally dumped my OS and reloaded from scratch with only my OS and the software I wanted to use. After a firmware upgrade to my DVD drive, it all fell together. My advice is try a package, if it doesn't work, do a complete uninstall on it before loading another.

 

Ok I have had similar problems with +R discs. The solution to my problem was very simple. Kill Nero 6.0 and install Nero 5.5 which only burns CDr's. Then I went to Nero and updated to 5.5.10.54 . To find out if your problem is the same as mine try -R disc if you have a dual format burner. If not I still think 5.5 is a better Nero version. Mainly because it's been out forever and 99% of the bugs are worked out. BTW had 5 coasters using Nero 6.0 and 0 coasters using Nero 5.5

Just my 2 cents

 

No winning combos its the Sony burner just do the firmware updates so burner reads that is DRU510A 10d. Make sure you do 10c first the do 10d then use whatever burn app you like...and media as well I have used Radio Shack DVD-R I almost find the generic dvd-r
are just as good as name brand. Funny part of this is most of my coasters are SONY brand! I assumed Sony burner/Sony Media cant get any better "combo"........ WRONG!! Do updates and you should be home free and able to use what app you like not what the burner likes
as it should be let me know if you cant find i have them.
Good Luck

 

Dammit. Burnt another coaster! I removed all other burning software and downgraded to Nero 5.5 like what people suggested above. This time the burn process made it like 90% of the way thru then gave me the burn failure. I must be doing something wrong... I basically open the DVD in dvdshrink and downsize it (using auto) so it will fit. Then i open Nero Burning Rom and drag all the files from DVD Shrink into the VIDEO_TS folder. I then burn. It pops up a message about multisession and i say to Not use multisession (is that right). It then burns for a while then fails. Here's my log if it helps? Is it possible i got a bad batch of Philips DVD+Rs? That doesn't sound very likely to me, but who knows.... Someone mentioned my ASPI layer might be bad - how do i check that? I also ran that nero tool to disable the drivers it doesn't like...

Demo
Demo
5506-0393-2013-4794-2820-4258

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 3:03:36 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 1/29/2003 10:37:36 PM
Nero Version: 5.5.10.54
Recorder: <SONY DVD RW DRU-510A> Version: 1.0d - HA 1 TA 0 - 5.5.10.54
Adapter driver: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DRU-510A>Version: 1.0d - HA 1 TA 0 - 5.5.10.54
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JB-00DUA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-510A atapi Port 1 ID 0 DMA: On
DiskPeripheral : Promise 1X2 Mirror/RAID11.10 Fasttrak Port 2 ID 0 DMA: ?
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 513MB (526276kB)
Memory in use : 33 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On

10.1.2004
UDF/ISO compilation
10:21:43 AM #1 Phase 112 File dlgbrnst.cpp, Line 1655
DVD-Video files reallocation started

10:21:43 AM #2 Phase 114 File dlgbrnst.cpp, Line 1655
DVD-Video files reallocation completed (no file modified)

10:21:43 AM #3 Text 0 File Isodoc.cpp, Line 7604
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

10:21:43 AM #4 Phase 111 File dlgbrnst.cpp, Line 1655
DVD-Video files sorted

10:21:43 AM #5 Text 0 File Reader.cpp, Line 115
Reader running

10:21:43 AM #6 Text 0 File Writer.cpp, Line 125
Writer SONY DVD RW DRU-510A running

10:21:43 AM #7 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)

10:21:43 AM #8 ISO9660GEN -11 File geniso.cpp, Line 4571
First writeable address = 0 (0x00000000)

10:21:43 AM #9 Text 0 File Burncd.cpp, Line 3769
Turn on Disc-At-Once, using DVD media

10:21:44 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 2286448 (2286448) = #2286448/508:5.73
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

10:21:45 AM #11 Text 0 File DlgWaitCD.cpp, Line 229
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 2286447 (508:05.72)

10:21:45 AM #12 Text 0 File DlgWaitCD.cpp, Line 234
Write in overburning mode: FALSE

10:21:45 AM #13 Text 0 File DlgWaitCD.cpp, Line 1703
Recorder: SONY DVD RW DRU-510A, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: R01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 0

10:21:50 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder SONY DVD RW DRU-510A for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 387985408

10:21:50 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 2286448 (2286448) = #2286448/508:5.73
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286448 blocks [SONY DVD RW DRU-510A ]
--------------------------------------------------------------

10:21:50 AM #16 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started

10:21:50 AM #17 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed

10:21:50 AM #18 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 2.4x (3,312 KB/s)

10:21:52 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

10:21:52 AM #20 Text 0 File Cdrdrv.cpp, Line 7931
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 43 4D 43 20 4D 41 - 47 00 52 30 31 00 38 23 ..CMC.MAG.R01.8#
54 37 0A 02 78 6E 02 C8 - 63 16 16 0B 0B 0A 0A 01 T7..xn..c.......
1C 1E 0B 0C 12 12 01 00 - 00 00 00 00 00 00 00 00 ................

10:21:52 AM #21 Text 0 File DVDPlusRW.cpp, Line 464
Start write address at LBA 0
DVD high compatibility mode: Yes

10:39:50 AM #22 SCSI -1135 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x025F0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x08
CDB Data: 0x2A 0x00 0x00 0x1A 0xF1 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x1A 0xE8 0x47 0x12
0x00 0x00 0x00 0x00 0x0C 0x08

10:39:50 AM #23 DVDR -1135 File Writer.cpp, Line 333
Write error

10:39:50 AM #24 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

10:39:51 AM #25 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader

10:40:23 AM #26 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 2.4x (3,312 KB/s)

10:40:23 AM #27 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 3:03:36 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 9/10/2003 12:00:00 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.39a, size=16288 bytes, created 9/25/2002 2:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 3:27:50 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

 

Hello everyone

PLEASE HELP ME ! ! !

I recently bought a Verbatim Producer 44E external DVD burner that says "External DVD+rw/+rcdrwfirewire/usb2.0" on the box.

I have tried burning a dvd numerous times following the guide from this website. I used a program that made the original dvd able to fit on a 4.7 dvd. It save the following files into a folder on my hard drive AND when I follow the instructions to get it onto a blank DVD it comes up not allowing me to do so.

I have put the following files here so someone might know what is going on and help me

Here are the names of the files in the folder:
video_ts.bup, a few vts.bup's, vtsO (navigation files, and a bunch of VTS.vob files. They all total less than 4.7 gig but are still big enoungh to be the movie.
I am using a dvd called " ProData DVD-R dvd recordable dvd 4.7 gig Write once"

I have deleted Roxio easy cd creater and also downloaded the nero program for cleaning registry.

When I extracted the above files it seemed to work ok - but using Nero to put them onto dvd does not work sand it gave me the following text file:

james
home
1A23-2044-1068-9150-6096-7217

Windows 98 4.90 (ME)
IA32
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 08/06/2000 5:00:00 PM
ahead WinASPI: File 'C:\PROGRAM FILES\AHEAD\NERO\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 3:25:04 PM
Nero version: 6.0.0.9
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.05 - HA 1 TA 0 - 6.0.0.9
Adapter driver: <USBMPHLP> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: USB
CD-ROM: <TOSHIBA DVD-ROM SD-R2002>Version: 1029 - HA 0 TA 0 - 6.0.0.9
Adapter driver: <ESDI_506
> HA 0
Bus Type : default (0) -> ATAPI, detected: ATAPI
TOSHIBA DVD-ROM SD-R2002 (Target 0, E: Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ?
_NEC DVD_RW ND-1300A (Target 0, F: Autoinsert On, DMA ?, Disconnect ?, SyncDataXfer ?
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 254MB (261048kB)
Free physical memory: 43MB (44320kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)

10.1.2004
UDF/ISO compilation
10:30:24 AM #1 Phase 112 File dlgbrnst.cpp, Line 1843
DVD-Video files reallocation started

10:30:24 AM #2 Phase 114 File dlgbrnst.cpp, Line 1843
DVD-Video files reallocation completed (no file modified)

10:30:24 AM #3 Text 0 File Isodoc.cpp, Line 5748
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:30:24 AM #4 Phase 111 File dlgbrnst.cpp, Line 1843
DVD-Video files sorted

10:30:24 AM #5 Text 0 File Reader.cpp, Line 118
Reader running

10:30:24 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

10:30:24 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

10:30:24 AM #8 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-at-once, using DVD media

10:30:25 AM #9 Text 0 File DlgWaitCD.cpp, Line 228
Last possible write address on media: 2298495 (510:46.45)
Last address to be written: 2286447 (508:05.72)

10:30:25 AM #10 Text 0 File DlgWaitCD.cpp, Line 233
Write in overburning mode: FALSE

10:30:25 AM #11 Text 0 File DlgWaitCD.cpp, Line 1722
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R
Disc Manufacturer: LEADDA - TA01
Disc Application Code: 64, Disc Physical Code: 193

10:30:25 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 768
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286448 (2286448) = #2286448/508:5.73
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286448 blocks [_NEC DVD_RW ND-1300A ]
--------------------------------------------------------------

10:30:25 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 937
Prepare recorder [_NEC DVD_RW ND-1300A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4682952704, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286448 | lead-out | 1 | 0x00 | 0x41

10:30:25 AM #14 Phase 24 File dlgbrnst.cpp, Line 1843
Caching of files started

10:30:25 AM #15 Phase 25 File dlgbrnst.cpp, Line 1843
Caching of files completed

10:30:25 AM #16 Phase 36 File dlgbrnst.cpp, Line 1843
Burn process started at 2x (2,760 KB/s)

10:30:25 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2130
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:30:25 AM #18 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 28:15,789 (1695789ms) -> OK

10:30:25 AM #19 Text 0 File DVDR.cpp, Line 1485
Recording mode: Sequential Recording Mode

10:30:25 AM #20 Text 0 File Mmc.cpp, Line 18724
Set BUFE: JustLink -> ON

10:30:25 AM #21 Text 0 File DVDR.cpp, Line 1600
Start write address at LBA 0
DVD high compatibility mode: Yes

10:30:25 AM #22 Text 0 File Cdrdrv.cpp, Line 7906
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:30:25 AM #23 SCSI -1046 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0xE3 0x70 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

10:30:25 AM #24 CDR -1046 File ThreadedTransferInterface.cpp, Line 1534
Illegal disc

10:30:25 AM #25 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1534
Could not perform start of Disc-at-once

10:30:25 AM #26 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

10:30:25 AM #27 Phase 38 File dlgbrnst.cpp, Line 1843
Burn process failed at 2x (2,760 KB/s)


Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 08/06/2000 5:00:00 PM
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 11/03/2002 12:55:38 PM
File 'IoSubsys\CDR4VSD.VXD': Ver=2.5 (099), size=197884 bytes, created 02/06/2003 12:35:56 PM
File 'IoSubsys\CDRALVSD.VXD': Ver=1.00 (1046), size=20043 bytes, created 02/06/2003 12:35:56 PM
File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 02/06/2003 12:35:54 PM
File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 08/06/2000 5:00:00 PM
File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 08/06/2000 5:00:00 PM
File 'IoSubsys\USBMPHLP.PDR': Ver=4.90.3000, size=4861 bytes, created 08/06/2000 5:00:00 PM
File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 08/06/2000 5:00:00 PM
File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 08/06/2000 5:00:00 PM
File '..\System32\Drivers\Ntmap.sys': Ver=4.90.3000, size=8704 bytes, created 08/06/2000 5:00:00 PM
File 'IoSubsys\Ntmaphlp.pdr': Ver=4.90.3000, size=12917 bytes, created 08/06/2000 5:00:00 PM
File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 08/06/2000 5:00:00 PM
File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 08/06/2000 5:00:00 PM
File 'IoSubsys\USBMPHLP.PDR': Ver=4.90.3000, size=4861 bytes, created 08/06/2000 5:00:00 PM (Adapter driver for rec)


I have followed every possible instruction I know of and still I can not burn it.
I know the external dvd is working cuz I have put a cd in there and it ready it no probs!

P L E A S E H E L P M E --------I AM AT ODDS
AS TO WHAT I OR THE STYSTEM IS DOING WRONG!!!!!

You can email me at jalderson@hotmail.com if you have specific instructions for me to try.

I have also tried Xcopy also without any success!

James

 

Hello everyone

PLEASE HELP ME ! ! !

I recently bought a Verbatim Producer 44E external DVD burner that says "External DVD+rw/+rcdrwfirewire/usb2.0" on the box.

I have tried burning a dvd numerous times following the guide from this website. I used a program that made the original dvd able to fit on a 4.7 dvd. It save the following files into a folder on my hard drive AND when I follow the instructions to get it onto a blank DVD it comes up not allowing me to do so.

I have put the following files here so someone might know what is going on and help me

Here are the names of the files in the folder:
video_ts.bup, a few vts.bup's, vtsO (navigation files, and a bunch of VTS.vob files. They all total less than 4.7 gig but are still big enoungh to be the movie.
I am using a dvd called " ProData DVD-R dvd recordable dvd 4.7 gig Write once"

I have deleted Roxio easy cd creater and also downloaded the nero program for cleaning registry.

When I extracted the above files it seemed to work ok - but using Nero to put them onto dvd does not work sand it gave me the following text file:

james
home
1A23-2044-1068-9150-6096-7217

Windows 98 4.90 (ME)
IA32
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 08/06/2000 5:00:00 PM
ahead WinASPI: File 'C:\PROGRAM FILES\AHEAD\NERO\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 3:25:04 PM
Nero version: 6.0.0.9
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.05 - HA 1 TA 0 - 6.0.0.9
Adapter driver: <USBMPHLP> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: USB
CD-ROM: <TOSHIBA DVD-ROM SD-R2002>Version: 1029 - HA 0 TA 0 - 6.0.0.9
Adapter driver: <ESDI_506
> HA 0
Bus Type : default (0) -> ATAPI, detected: ATAPI
TOSHIBA DVD-ROM SD-R2002 (Target 0, E: Autoinsert On, DMA On, Disconnect ?, SyncDataXfer ?
_NEC DVD_RW ND-1300A (Target 0, F: Autoinsert On, DMA ?, Disconnect ?, SyncDataXfer ?
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 254MB (261048kB)
Free physical memory: 43MB (44320kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)

10.1.2004
UDF/ISO compilation
10:30:24 AM #1 Phase 112 File dlgbrnst.cpp, Line 1843
DVD-Video files reallocation started

10:30:24 AM #2 Phase 114 File dlgbrnst.cpp, Line 1843
DVD-Video files reallocation completed (no file modified)

10:30:24 AM #3 Text 0 File Isodoc.cpp, Line 5748
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:30:24 AM #4 Phase 111 File dlgbrnst.cpp, Line 1843
DVD-Video files sorted

10:30:24 AM #5 Text 0 File Reader.cpp, Line 118
Reader running

10:30:24 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

10:30:24 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3854
First writeable address = 0 (0x00000000)

10:30:24 AM #8 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-at-once, using DVD media

10:30:25 AM #9 Text 0 File DlgWaitCD.cpp, Line 228
Last possible write address on media: 2298495 (510:46.45)
Last address to be written: 2286447 (508:05.72)

10:30:25 AM #10 Text 0 File DlgWaitCD.cpp, Line 233
Write in overburning mode: FALSE

10:30:25 AM #11 Text 0 File DlgWaitCD.cpp, Line 1722
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R
Disc Manufacturer: LEADDA - TA01
Disc Application Code: 64, Disc Physical Code: 193

10:30:25 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 768
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286448 (2286448) = #2286448/508:5.73
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286448 blocks [_NEC DVD_RW ND-1300A ]
--------------------------------------------------------------

10:30:25 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 937
Prepare recorder [_NEC DVD_RW ND-1300A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4682952704, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286448 | lead-out | 1 | 0x00 | 0x41

10:30:25 AM #14 Phase 24 File dlgbrnst.cpp, Line 1843
Caching of files started

10:30:25 AM #15 Phase 25 File dlgbrnst.cpp, Line 1843
Caching of files completed

10:30:25 AM #16 Phase 36 File dlgbrnst.cpp, Line 1843
Burn process started at 2x (2,760 KB/s)

10:30:25 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2130
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:30:25 AM #18 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 28:15,789 (1695789ms) -> OK

10:30:25 AM #19 Text 0 File DVDR.cpp, Line 1485
Recording mode: Sequential Recording Mode

10:30:25 AM #20 Text 0 File Mmc.cpp, Line 18724
Set BUFE: JustLink -> ON

10:30:25 AM #21 Text 0 File DVDR.cpp, Line 1600
Start write address at LBA 0
DVD high compatibility mode: Yes

10:30:25 AM #22 Text 0 File Cdrdrv.cpp, Line 7906
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:30:25 AM #23 SCSI -1046 File Cdrdrv.cpp, Line 1205
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0xE3 0x70 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

10:30:25 AM #24 CDR -1046 File ThreadedTransferInterface.cpp, Line 1534
Illegal disc

10:30:25 AM #25 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1534
Could not perform start of Disc-at-once

10:30:25 AM #26 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

10:30:25 AM #27 Phase 38 File dlgbrnst.cpp, Line 1843
Burn process failed at 2x (2,760 KB/s)


Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.90.3000, size=19278 bytes, created 08/06/2000 5:00:00 PM
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 11/03/2002 12:55:38 PM
File 'IoSubsys\CDR4VSD.VXD': Ver=2.5 (099), size=197884 bytes, created 02/06/2003 12:35:56 PM
File 'IoSubsys\CDRALVSD.VXD': Ver=1.00 (1046), size=20043 bytes, created 02/06/2003 12:35:56 PM
File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 02/06/2003 12:35:54 PM
File 'IoSubsys\CDFS.VXD': Ver=4.90.3000, size=59141 bytes, created 08/06/2000 5:00:00 PM
File 'IoSubsys\ESDI_506.PDR': Ver=4.90.3000, size=25365 bytes, created 08/06/2000 5:00:00 PM
File 'IoSubsys\USBMPHLP.PDR': Ver=4.90.3000, size=4861 bytes, created 08/06/2000 5:00:00 PM
File '..\System32\Drivers\1394bus.sys': Ver=4.90.3000.1, size=44240 bytes, created 08/06/2000 5:00:00 PM
File '..\System32\Drivers\Ohci1394.sys': Ver=4.90.3000.1, size=49488 bytes, created 08/06/2000 5:00:00 PM
File '..\System32\Drivers\Ntmap.sys': Ver=4.90.3000, size=8704 bytes, created 08/06/2000 5:00:00 PM
File 'IoSubsys\Ntmaphlp.pdr': Ver=4.90.3000, size=12917 bytes, created 08/06/2000 5:00:00 PM
File '..\System32\Drivers\Sbp2port.sys': Ver=4.90.3000.1, size=36336 bytes, created 08/06/2000 5:00:00 PM
File 'IoSubsys\Disktsd.vxd': Ver=4.90.3000, size=18663 bytes, created 08/06/2000 5:00:00 PM
File 'IoSubsys\USBMPHLP.PDR': Ver=4.90.3000, size=4861 bytes, created 08/06/2000 5:00:00 PM (Adapter driver for rec)


I have followed every possible instruction I know of and still I can not burn it.
I know the external dvd is working cuz I have put a cd in there and it ready it no probs!

P L E A S E H E L P M E --------I AM AT ODDS
AS TO WHAT I OR THE STYSTEM IS DOING WRONG!!!!!

You can email me at jalderson@hotmail.com if you have specific instructions for me to try.

I have also tried Xcopy also without any success!

James

 

try force aspi

 

Bluearch,
bigunit has already suggested that you install an ASPI Driver - find one here - http://download.com.com/3000-2098-10161912.html

Next - after you have used DVDShrink (when you are using it WRITE DOWN the folder you are doing the backup to -

THEN
Follow these directions EXACTLY when using Nero and you'll be on your way -

How to burn using Nero 6.0.
Step by Step –
Do not use Nero Wizard.
When you open Nero Burning ROM, you will be at the “New Compilation” window. Directly under the title “New Compilation” is a choice block to choose either DVD or CD, choose DVD. Directly under that click on DVD Video. Then click “New” in the upper right corner of that screen, NOT the main screen.
You now are in the DVD Video window. In the left screen, click VIDEO_TS. In the File Browser screen, 3rd from the left, trace your path to the DVDShrink folder holding your work and click on that folder. All of your VIDEO_TS files are now opened in the right screen. Click on the top file, hold down the “Shift” key and then click the bottom file thereby hi-lighting the entire column of files. Click and (holding the left mouse button down) drag the entire column of files to the open screen, second from the left.
Now click the icon on the task bar that shows a match on a disc, and then click “Burn” and Baby, Scream it to me, Who’s your Daddy Now ???

Guess what my Friend ??

Go watch some TV, call your mother (It’s been awhile since she’s heard from you, don’t ya know? J) You are done !!!
Keep all fingers and toes away from Mr. Computer. Never mess with the lady when she’s working – it would be a health thing, you understand -
Go and have your coffee, when Nero is done she will let you know ;-))

Enjoy, “P”
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^



jga,

Reading your messages I notice that your NEC isn't playing well with others -
"jefh11" in another thrtead provided the most updated firmware link and I'm passing it on to you (Thank you jefh11) Flash your NEC with this (verision 1.09) remember, after you have flashed your drive you need to power down everything to allow it to "take".
For the latest firmware upgrade point your snout toward - (it being like a truffel hunt )
http://www.tweakers.net/meuktracker/5228


Hope it helps -

Pete

 

Either try to reinstall windows if nothing works..Or go to microsoft update and download all the patches..Then make sure ur drive has firmware D.And download DSS(Drive Speed Selector) at the sony web site..

I been using Ritek G04 & G03 has It works good for me.