Please help me. This is my first post ever. Not really a newbie to DVD backups but lately Nero 7.5.9.0 fails about 80-85% of the time and I use Verbatim DL DVD+R. I also use AnyDVD 6.0.9.9 and have the latest version of firmware for my external dvd burner for my laptop connected thru usb 2.0 pcmia card. I mostly copy 'on the fly' and just do 1:1 backups at the lowest speed 2.4x My dvd external recorder is (1:0) E:\TSSTcorp CD/DVDW SH-S162L and dvd in laptop is (0:1) D:\HL-DT-ST RW/DVD GCC-4240N I am always getting some sort of error or freeze or something that causes Nero 7 to fail the burn process. I have all my DMA settings enabled and ON. I am not running other programs in the background, disabled NAV, and am not multi-tasking or anything. I have uninstalled Roxio 5 and any and all traces of any other burning software other than Nero. So where I stand now, I have uninstalled Nero 7, uninstalled AnyDVD, run CCleaner, rebooted, etc. Reinstalled Nero 7, reinstalled AnyDVD and have attempted 2 backups. The first was of American Pie Naked Mile and was successful. Under options I was able to set it to DVD-Rom for booktype. The second backup I attempted was the first disc from the 4th season of South Park, and it failed. I had an 'Unrecoverable Read Error at LBA 2120288'. I have had similar errors with Nero/Anydvd on other disc backups and have run the latest VSO inspector on the source disc and had no errors. It is something with Nero 7. With the failed backup of South Park, I noticed that under options the only thing shown was a checkbox for DVD high compatibility mode but did not have Book Type settings or the drop down?!, so I thought that was weird and have had that problem a few times before. I have also tried backing up from E: to E: so I write to my hardrive first and then to the burner, in case my source drive had a problem or something, and Nero 7 has also failed many times that way too, so it is not just 'on the fly' backups. Also, I have been using NeroExpress (or Nero Start Smart and then copy DVD), but have also had many failed coasters in NeroBurningRom as well as Nero Recode. So, I am baffled at what is causing the conflict or what the problem is that I fail so many burn processes. I really like Nero and the successful backups have great quality, but I am starting to think of trying Roxio 8 or ImgBurn or something. Also, I have noticed on other posted examples of Nero Infotool results, that it lists the DVD drives and under each one it said something like DMA enabled; mine just lists my 2 dvd drives but nothing underneath each one, so I didn't know if that had anything to do with the problem. I will now post the first Nero log of my successful back followed by the 2nd Nero log of the unsuccessful backup. Thank you in advance for all your help. I think I have covered the important details but let me know if I am missing something.
Here is the successful log in case it helps in some way: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 4:06:00 AM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 7.5.9.0 Internal Version: 7, 5, 9, 0 (Nero Express) Recorder: <TSSTcorp CD/DVDW SH-S162L>Version: TS06 - HA 1 TA 1 - 7.5.9.0 Adapter driver: <USB 2.0> HA 1 Drive buffer : 2048kB Bus Type : set to ATAPI (3) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST RW/DVD GCC-4240N>Version: D110 - HA 1 TA 0 - 7.5.9.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N040ATCS05-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST RW/DVD GCC-4240N atapi Port 0 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST RW/DVD GCC-4240N D: CDRom0 TSSTcorp CD/DVDW SH-S162L E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (83886080) Byte BUFE : 0 Physical memory : 511MB (523704kB) Free physical memory: 231MB (236996kB) Memory in use : 54 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.12.2006 DVD-Copy on the fly 10:11:17 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 10:11:19 PM #2 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 10:11:20 PM #3 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:11:20 PM #4 Text 0 File DVDCopy.cpp, Line 319 DVD Track-Information from source disc: Media Type: DVD-ROM Last LBA on layer 0 = 2059807 / 0x1F6E1F / 4023MB S01 T01 Con 0x14 Start 0 Len 4099580 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 10:11:20 PM #5 Text 0 File DVDCopy.cpp, Line 434 Max -1 tracks of 1 allowed to copy 1: 0 - 4099580 = 4099580, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 10:11:20 PM #6 Text 0 File Burncd.cpp, Line 3451 Turn on Disc-At-Once, using DVD media 10:11:21 PM #7 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 4173823 (927:30.73, 8151MB) Last address to be written: 4099579 (911:01.04, 8006MB) 10:11:21 PM #8 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO (enabled: CD) 10:11:21 PM #9 Text 0 File DlgWaitCD.cpp, Line 2903 Recorder: TSSTcorp CD/DVDW SH-S162L, Media type: DVD+R9 Double Layer Disc Manufacturer ID: MKM, Media Type ID: 001, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 0 10:11:21 PM #10 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:11:21 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 821 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 4099580 (4099580) = #4099580/911:1.5 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4099580 blocks [E: TSSTcorp CD/DVDW SH-S162L] -------------------------------------------------------------- 10:11:21 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1024 Prepare [E: TSSTcorp CD/DVDW SH-S162L] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8395939840, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 4099580 | 4099580 | 0x00 0 | 1 | 1 | 0x41 | 4099580 | 4099580 | 0x00 4099580 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 10:11:21 PM #13 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:11:21 PM #14 Phase 36 File dlgbrnst.cpp, Line 1746 Burn process started at 2.4x (3,324 KB/s) 10:11:21 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2743 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:11:53 PM #16 SPTI -1066 File SCSIPassThrough.cpp, Line 179 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 21 08 04 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 Buffer x06882140: Len x804 10:11:53 PM #17 Text 0 File DVDPlusDualLayer.cpp, Line 640 L0 Data Zone Capacity set to 2059808 (1F6E20h, 4023MB) -> OK, confirmed setting 10:11:53 PM #18 CDR -1205 File DVDPlusDualLayer.cpp, Line 667 Burning Layer 1 10:11:53 PM #19 Text 0 File DVDPlusDualLayer.cpp, Line 677 Start writing layer 1 at address 0 (0h) Recording mode: unknown Recording Mode 10:11:53 PM #20 Text 0 File Cdrdrv.cpp, Line 9234 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R DL (14), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable Linear Density: 0,293 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: FCFFFF h End Sector Number in Layer 0: 22D7FF h (LBN: 1FD7FF h, 4075 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 0 h Disc Manufacturer ID: MKM..... Media type ID: 001 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 64 Media Specific [16..63]: 00 00 00 4D 4B 4D 00 00 - 00 00 00 30 30 31 00 40 ...MKM.....001.@ 25 25 37 0C 02 2F 63 02 - 2F 63 21 23 0D 0E 14 14 %%7../c./c!#.... 02 01 01 10 00 21 23 0D - 0E 14 14 02 01 01 10 00 .....!#......... 10:11:53 PM #21 Text 0 File Cdrdrv.cpp, Line 9234 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R DL (14), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable Linear Density: 0,293 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: FCFFFF h End Sector Number in Layer 0: 22D7FF h (LBN: 1FD7FF h, 4075 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 0 h Disc Manufacturer ID: MKM..... Media type ID: 001 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 64 Media Specific [16..63]: 00 00 00 4D 4B 4D 00 00 - 00 00 00 30 30 31 00 40 ...MKM.....001.@ 25 25 37 0C 02 2F 63 02 - 2F 63 21 23 0D 0E 14 14 %%7../c./c!#.... 02 01 01 10 00 21 23 0D - 0E 14 14 02 01 01 10 00 .....!#......... 10:11:53 PM #22 Text 0 File Cdrdrv.cpp, Line 9234 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R DL (14), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable Linear Density: 0,293 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: FCFFFF h End Sector Number in Layer 0: 22D7FF h (LBN: 1FD7FF h, 4075 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 0 h Disc Manufacturer ID: MKM..... Media type ID: 001 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 64 Media Specific [16..63]: 00 00 00 4D 4B 4D 00 00 - 00 00 00 30 30 31 00 40 ...MKM.....001.@ 25 25 37 0C 02 2F 63 02 - 2F 63 21 23 0D 0E 14 14 %%7../c./c!#.... 02 01 01 10 00 21 23 0D - 0E 14 14 02 01 01 10 00 .....!#......... 10:11:53 PM #23 Text 0 File DVDR.cpp, Line 8070 Drive: TSSTcorp CD/DVDW SH-S162L Book Type request [TSST]: DVD-ROM Changing the Book Type was finished successfully, return code 0 10:11:53 PM #24 CDR -1211 File DVDR.cpp, Line 6154 Book Type set to: DVD-ROM 10:11:53 PM #25 Text 0 File DVDPlusRW.cpp, Line 674 Start write address at LBA 0 DVD high compatibility mode: Yes 10:33:45 PM #26 CDR -1206 File DVDPlusDualLayer.cpp, Line 1950 Burning Layer 2 10:33:45 PM #27 Text 0 File DVDPlusDualLayer.cpp, Line 1961 Perform layer 1 to 2 jump before writing at address 2059808 (1F6E20h) 10:54:56 PM #28 Text 0 File WriterStatus.cpp, Line 113 <E: TSSTcorp CD/DVDW SH-S162L> start writing Lead-Out at LBA 4099580 (3E8DFCh), length 0 blocks 10:56:09 PM #29 Phase 37 File dlgbrnst.cpp, Line 1746 Burn process completed successfully at 2.4x (3,324 KB/s) 10:56:10 PM #30 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:56:10 PM #31 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 10:56:10 PM #32 Text 0 File Cdrdrv.cpp, Line 10467 DriveLocker: UnLockVolume completed 10:56:10 PM #33 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:56:10 PM #34 Text 0 File Cdrdrv.cpp, Line 10467 DriveLocker: UnLockVolume completed 10:56:10 PM #35 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 4:06:00 AM File 'Drivers\PXHELP20.SYS': Ver=2.02.56a, size=17168 bytes, created 11/1/2004 1:02:55 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) AND HERE IS THE 2ND NERO LOG THAT WAS UNSUCCESSFUL!!! Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 4:06:00 AM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 7.5.9.0 Internal Version: 7, 5, 9, 0 (Nero Express) Recorder: <TSSTcorp CD/DVDW SH-S162L>Version: TS06 - HA 1 TA 1 - 7.5.9.0 Adapter driver: <USB 2.0> HA 1 Drive buffer : 2048kB Bus Type : set to ATAPI (3) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST RW/DVD GCC-4240N>Version: D110 - HA 1 TA 0 - 7.5.9.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N040ATCS05-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST RW/DVD GCC-4240N atapi Port 0 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST RW/DVD GCC-4240N D: CDRom0 TSSTcorp CD/DVDW SH-S162L E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (83886080) Byte BUFE : 0 Physical memory : 511MB (523704kB) Free physical memory: 178MB (182344kB) Memory in use : 65 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.12.2006 DVD-Copy on the fly 11:08:20 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 11:08:22 PM #2 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 11:08:23 PM #3 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 11:08:23 PM #4 Text 0 File DVDCopy.cpp, Line 319 DVD Track-Information from source disc: Media Type: DVD-ROM Last LBA on layer 0 = 1764447 / 0x1AEC5F / 3446MB S01 T01 Con 0x14 Start 0 Len 3408253 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 11:08:23 PM #5 Text 0 File DVDCopy.cpp, Line 434 Max -1 tracks of 1 allowed to copy 1: 0 - 3408253 = 3408253, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 11:08:23 PM #6 Text 0 File Burncd.cpp, Line 3451 Turn on Disc-At-Once, using DVD media 11:08:23 PM #7 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 4173823 (927:30.73, 8151MB) Last address to be written: 3408252 (757:23.27, 6656MB) 11:08:23 PM #8 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO (enabled: CD) 11:08:23 PM #9 Text 0 File DlgWaitCD.cpp, Line 2903 Recorder: TSSTcorp CD/DVDW SH-S162L, Media type: DVD+R9 Double Layer Disc Manufacturer ID: MKM, Media Type ID: 001, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 0 11:08:23 PM #10 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:08:23 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 821 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 3408253 (3408253) = #3408253/757:23.28 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3408253 blocks [E: TSSTcorp CD/DVDW SH-S162L] -------------------------------------------------------------- 11:08:23 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1024 Prepare [E: TSSTcorp CD/DVDW SH-S162L] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 6980102144, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 3408253 | 3408253 | 0x00 0 | 1 | 1 | 0x41 | 3408253 | 3408253 | 0x00 3408253 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 11:08:23 PM #13 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 11:08:23 PM #14 Phase 36 File dlgbrnst.cpp, Line 1746 Burn process started at 2.4x (3,324 KB/s) 11:08:24 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2743 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 11:08:58 PM #16 SPTI -1066 File SCSIPassThrough.cpp, Line 179 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 21 08 04 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 Buffer x06882140: Len x804 11:08:58 PM #17 Text 0 File DVDPlusDualLayer.cpp, Line 640 L0 Data Zone Capacity set to 1764448 (1AEC60h, 3446MB) -> OK, confirmed setting 11:08:58 PM #18 CDR -1205 File DVDPlusDualLayer.cpp, Line 667 Burning Layer 1 11:08:58 PM #19 Text 0 File DVDPlusDualLayer.cpp, Line 677 Start writing layer 1 at address 0 (0h) Recording mode: unknown Recording Mode 11:08:58 PM #20 Text 0 File Cdrdrv.cpp, Line 9234 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R DL (14), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable Linear Density: 0,293 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: FCFFFF h End Sector Number in Layer 0: 22D7FF h (LBN: 1FD7FF h, 4075 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 0 h Disc Manufacturer ID: MKM..... Media type ID: 001 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 64 Media Specific [16..63]: 00 00 00 4D 4B 4D 00 00 - 00 00 00 30 30 31 00 40 ...MKM.....001.@ 25 25 37 0C 02 2F 63 02 - 2F 63 21 23 0D 0E 14 14 %%7../c./c!#.... 02 01 01 10 00 21 23 0D - 0E 14 14 02 01 01 10 00 .....!#......... 11:08:58 PM #21 Text 0 File DVDPlusRW.cpp, Line 674 Start write address at LBA 0 DVD high compatibility mode: Yes 11:27:52 PM #22 CDR -1206 File DVDPlusDualLayer.cpp, Line 1950 Burning Layer 2 11:27:52 PM #23 Text 0 File DVDPlusDualLayer.cpp, Line 1961 Perform layer 1 to 2 jump before writing at address 1764448 (1AEC60h) 11:31:32 PM #24 SPTI -1128 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x00 CDB Data: 0x28 00 00 20 5A 60 00 00 20 00 00 00 Sense Area: 0xF0 00 03 00 20 5A 70 0A 00 00 00 00 11 Buffer x0aff0e80: Len x10000 11:31:32 PM #25 TRANSFER -25 File Reader.cpp, Line 379 Error reading data 11:31:32 PM #26 Text 0 File Reader.cpp, Line 382 Exception value: -1128 11:31:32 PM #27 CDCOPY -12 File DVDReader.cpp, Line 144 Unrecoverable read error at LBA 2120288 11:46:51 PM #28 Phase 38 File dlgbrnst.cpp, Line 1746 Burn process failed at 2.4x (3,324 KB/s) 11:46:51 PM #29 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 11:47:17 PM #30 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 11:47:17 PM #31 Text 0 File Cdrdrv.cpp, Line 10467 DriveLocker: UnLockVolume completed 11:47:17 PM #32 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 11:47:17 PM #33 Text 0 File Cdrdrv.cpp, Line 10467 DriveLocker: UnLockVolume completed 11:47:17 PM #34 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 4:06:00 AM File 'Drivers\PXHELP20.SYS': Ver=2.02.56a, size=17168 bytes, created 11/1/2004 1:02:55 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Also, this seems to only happen on DVD recordings, not Data, or Music. And I primarily use DL DVD's; I have tried single layer DVD+R and don't recall having the problem with those. I just do not care for compressing my movies so I therefore only use the DL discs.
Do you remember if you did a Book Type change on the failed burn? There are several differences in what happens in that area (starting around line #20), but it might be for that or some other reason.
The best luck I've had on DL's is Clone DVd2 and image burn . Nero has a hard time setting up the layer breaks . IMo Chris
Saltgrass, It did not have the option to booktype on my 2nd log failed burn. It usually has it under options but it did not exist this time and only had a checkbox for dvd high compatibility mode??!
As far as bitsetting this usually has to only be done once. Many drives now do this automatically, yours is one of these. To see if it's a Nero problem grab DVDDecpter and use the ISO-> Read, ISO-> Write Mode choosing the MDS file for the write. You might also want to look into ImgBurn as many feel this is the best bet in DL burning. http://forum.imgburn.com/index.php?s=38a91e6b9f9b18b747387c07ab7b3d43&showforum=4
I am also having a problem with Verb DL with the V, 7. I have never had one coaster with DL Verbs using V,6, have gone through a hundred of them fine but the first 2 with this new version come up as an error for bad media??? Verb LiteScribe's no prob only the DL. Using Nero 7.5.9.0 latest firmware for lite-on SHM-165H6S. AnyDVD 6.1.0.0 Clone DVD 2.9.0.3
