Hi I am new to this forum and would like some advice on what is going wrong with my burning in nero 7 . Recently I have been getting invalid block address errors, read and write errors. I have enclosed one of the logs below. Last week i bought a new burner and I burnt 5 traxdata double layer discs fine with no errors but since then I have installed and uninstalled a few programs for creating dvd's. I am wondering if this is the problem here , I have now uninstalled completely Nero 7 from my system and waiting to hear what suggestions next.I have also disabled recording on the windows properties as I read this should be disabled. Please help as this is driving me crazy its a new drive and fresh install of windows. Cheers in advance - Soulkiss x Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 09:20:56 ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32 NT-SPTI used Nero Version: 7.0.0.0 Recorder: <LITE-ON DVDRW SHW-1635S> Version: YS0J - HA 1 TA 0 - 7.0.0.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: CD-ROM: < JLMS DVD-ROM LTD-166S>Version: DS08 - HA 1 TA 1 - 7.0.0.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On DiskPeripheral : IC35L080AVVA07-0 atapi Port 0 ID 1 DMA: On DiskPeripheral : WDC WD800BB-00CAA1 atapi Port 1 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SHW-1635S atapi Port 2 ID 0 DMA: On CdRomPeripheral : JLMS DVD-ROM LTD-166S atapi Port 2 ID 1 DMA: On DiskPeripheral : Maxtor 6Y080L0 atapi Port 3 ID 0 DMA: On === CDRom-Device-Map === LITE-ON DVDRW SHW-1635S G: CDRom0 JLMS DVD-ROM LTD-166S H: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 1 BUFE : 0 Physical memory : 767MB (785904kB) Free physical memory: 358MB (366812kB) Memory in use : 53 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 5.1.2006 ISO compilation 08:06:37 #1 Text 0 File Isodoc.cpp, Line 6410 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 08:06:41 #2 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 81920KB of Memory 08:06:41 #3 Text 0 File Reader.cpp, Line 124 Reader running 08:06:41 #4 Text 0 File Writer.cpp, Line 113 Writer G: LITE-ON DVDRW SHW-1635S running 08:06:41 #5 ISO9660GEN -11 File Geniso.cpp, Line 3304 First writeable address = 0 (0x00000000) 08:06:43 #6 Text 0 File Burncd.cpp, Line 3301 Turn on Disc-At-Once, using DVD media 08:06:45 #7 Text 0 File DlgWaitCD.cpp, Line 277 Last possible write address on media: 4173823 (927:30.73, 8151MB) Last address to be written: 3779407 (839:52.07, 7381MB) 08:06:45 #8 Text 0 File DlgWaitCD.cpp, Line 289 Write in overburning mode: NO (enabled: CD DVD) 08:06:45 #9 Text 0 File DlgWaitCD.cpp, Line 2568 Recorder: LITE-ON DVDRW SHW-1635S, Media type: DVD+R9 Double Layer Disc Manufacturer ID: RICOHJPN, Media Type ID: D00, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 0 08:06:45 #10 Text 0 File DlgWaitCD.cpp, Line 456 >>> Protocol of DlgWaitCD activities: <<< ========================================= 08:06:45 #11 Text 0 File ThreadedTransferInterface.cpp, Line 846 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 3779408 (3779408) = #3779408/839:52.8 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3779408 blocks [G: LITE-ON DVDRW SHW-1635S] -------------------------------------------------------------- 08:06:45 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1058 Prepare recorder [G: LITE-ON DVDRW SHW-1635S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7740227584, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 3779408 | lead-out | 1 | 0x41 | 0x00 08:06:45 #13 Text 0 File SCSIPassThrough.cpp, Line 34 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 08:06:45 #14 Phase 24 File dlgbrnst.cpp, Line 1724 Caching of files started 08:06:45 #15 Text 0 File Burncd.cpp, Line 4129 Cache writing successful. 08:06:45 #16 Phase 25 File dlgbrnst.cpp, Line 1724 Caching of files completed 08:06:45 #17 Phase 36 File dlgbrnst.cpp, Line 1724 Burn process started at 2.4x (3,324 KB/s) 08:06:45 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2669 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 08:06:45 #19 Text 0 File DVDPlusDualLayer.cpp, Line 639 L0 Data Zone Capacity not set. Max LBA L0 2086911 (1FD7FFh, 4075MB), next writable address 0 (0h, 0MB) 08:06:45 #20 CDR -1205 File DVDPlusDualLayer.cpp, Line 655 Burning Layer 1 08:06:45 #21 Text 0 File DVDPlusDualLayer.cpp, Line 665 Start writing layer 1 at address 0 (0h) Recording mode: unknown Recording Mode 08:06:45 #22 Text 0 File Cdrdrv.cpp, Line 8385 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R DL (14), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable Linear Density: 0,293 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: FCFFFF h End Sector Number in Layer 0: 22D7FF h (LBN: 1FD7FF h, 4075 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 0 h Disc Manufacturer ID: RICOHJPN Media type ID: D00 Product revision number: 1 Number of Physical format information bytes in use in ADIP up to byte 63: 64 Media Specific [16..63]: 00 00 00 52 49 43 4F 48 - 4A 50 4E 44 30 30 01 40 ...RICOHJPND00.@ 25 25 37 11 00 34 64 00 - 34 64 20 21 0C 0D 12 12 %%7..4d.4d.!.... 02 01 01 10 00 20 21 0C - 0D 12 12 02 01 01 10 00 ......!......... 08:06:45 #23 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: No 08:28:37 #24 CDR -1206 File DVDPlusDualLayer.cpp, Line 1910 Burning Layer 2 08:28:37 #25 Text 0 File DVDPlusDualLayer.cpp, Line 1921 Perform layer 1 to 2 jump before writing at address 2086912 (1FD800h) 08:46:48 #26 SPTI -1135 File SCSIPassThrough.cpp, Line 306 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x5C 00 00 00 00 00 00 00 0C 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C Buffer x0385d000: Len xc 08:46:48 #27 SPTI -1064 File SCSIPassThrough.cpp, Line 306 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1064) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x21 Sense Qual: 0x02 CDB Data: 0x2A 00 00 39 83 20 00 00 20 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 21 02 Buffer x04a30000: Len x10000 0x00 04 AB 4B 5B 6B 4F 4A 32 6C E7 5B 7C 61 E8 3C 0x11 A5 7B 6B 2C B0 CD C1 73 9A 6D E4 F6 19 30 20 0x38 88 2B B8 CD 15 FA 71 41 25 56 AA F0 AC 43 4B 08:46:48 #28 CDR -1064 File Writer.cpp, Line 302 Invalid block address G: LITE-ON DVDRW SHW-1635S 08:46:48 #29 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 08:50:12 #30 SPTI -1176 File SCSIPassThrough.cpp, Line 306 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x72 Sense Qual: 0x02 CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 72 02 Buffer x03878000: Len x20 08:50:12 #31 CDR -1176 File WriterStatus.cpp, Line 167 Session fixation error G: LITE-ON DVDRW SHW-1635S 08:50:12 #32 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 08:50:12 #33 Phase 38 File dlgbrnst.cpp, Line 1724 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 08:53:02 File 'Drivers\InCDfs.SYS': Ver=5, 0, 0, 0, size=101504 bytes, created 30/08/2005 17:24:38 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=5, 0, 0, 0, size=29312 bytes, created 30/08/2005 17:24:18 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=5, 0, 0, 0, size=8704 bytes, created 30/08/2005 17:24:40 (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Latest version of firmware is YSOV You can get it here: http://forum.rpc1.org/dl_result.php?kaj=1&isces I think this will correct the medium error.
Update your firmware (If possible), And get some better media, (verbatim, Taiyo yuden ect..) I had the same problems using memorex before. Good luck
Thanks Guys do you think this firmware will sort out the problem here ?? I did downlaod it but yet to install it as got programs running.
THANKS GUYS !!!! IT SEEMS TO HAVE WORKED, GOT THE FIRMWARE FOR BOTH DVD ROM AND WRITER , THEN UNINSTALLED NERO, REINSTALL IT - MADE SURE I REBOOTED AFTER EACH FIRWARE UPGRADE AND INSTALLED ON A FRESH BOOT AND IT RECOGNISED BOTH DRIVES, JUST BURNED A DISC OF FOLDERS AND IT PLAYS ON BOTH DRIVES. PHEW WHAT A PALAVA !! SOULKISS
- if you have any more problems, remove InCD. (InCD is Nero's horrid 'packet writing software', uninstall Nero then uninstall completely via Nero's Clean Tools, then reinstall Nero WITHOUT installing InCD)
Hi - yes I reinstalled Nero and didn't install incd and it is so far creating perfect discs and burn 3 dual layers without problems.
