Help on eurobox max blue problem

Loaded firmware on box successfully, but when i connect it back to n*l on the RF connection i am getting no channel available on tv and 0000 on display of box and NO lights( no red or green lights) on box and when i scan for channels the signal bar is red. Can anyone help

 

You might be better off doing a factory default after flashing

Then you have to do an auto scan to get ch@nnels

If you are Ireland do it from 290.000 to 403.000
If you are in the UK , 200.000 to 800.00

Please be patient and wait for the scan to complete

 

Thanks Celtic71 for coming back so soon,
Yes the base is Dublin n*l.Ihave done the factory default
and the auto scan.I`M no techie but I think the problem is
in the( Stand by, Lock, Message.)on the front of the box.
No green light at all.Can you suggest anything. Many thanks.

 

Go to Eamo's Library and download Scousers channel dump file (CDF)for N*L and load it to the EV and see if you can get channels that way

 

Thanks Celtic71 will try that and let you know

 

Thanks Celtic71. Did as you said,loaded dump file
and it worked perfect.Once again thanks for your patience
and good work.