Hey all, so I followed the N00B LiteOn Flash with VIA instructions to the letter, uninstalling & deleting all the VIA stuff & then installing the PortIO32 file. The problem is when I start up Jungleflasher, click the DVDKey 32 tab and attempt to select the port that gives me DG-16D2S, my Pc freezes up and reboots its self! I am using the MAX3232 adapter. Please any help would be greatly appreciated!
I copied this from the IXtreme 1.5 firmware NFO.It tells about the freezing problems with VIA cards.Always read the NFO (readme). There is ALOT of new information to digest, in regards to this entire project, and the utilization of the LiteOn IXtreme firmware. With this release, also includes a new FirmTool (version 1.3), a beta version of JungleFlasher, which is a new GUI based all-in-one flash that includes a firmware tool, DVDKEY32, MTK flashing and Hitachi support. Please note that this software IS BETA and will not function 100%. Yes, there will be plenty of bugs JungleFlasher logs all errors/actions and will ask you to save a log upon exit. If you have a error please help us improve the software by emailing the log file to JungleFlasher - at - gmail - com. At this moment, we have had quirky issues in regards to VIA chipsets and flashing/reading/erasing the LiteOn drive. Please pay attention to the 2nd prompt in particular after hitting the Lite-On-Erase button. Power cycling the drive at the correct time is very important for VIA users. If the VIA polls the drive after erase, it WILL freeze/lock your computer. Tools for DOS erase/flash/key/spoof are included in this release for any users having difficulties within windows. JungleFlasher REQUIREMENTS: -PortIO32.exe - you MUST run this exe to install PortIO onto your system! (included in release) -.NET 2.0 or above
DUDE! He said he had a max3232. That should work fine, that is his connectivity kit. His prob is maybe with the pc. JF readme talks about "Liteon Freezes for VIA Users" but I have tried most all chipsets but Silicon Image and still freeze when an erased Liteon is connected to an active sata port. I just finish things up in dos. Is your pc freezing or rebooting itself?
