Hello guys, I'm getting an error message when I use Nero 7. This is the error message: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero API version: 7.5.9.0 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\Nero - Burning Rom Internal Version: 7, 5, 9, 0 Recorder: <_NEC DVD+-RW ND-6500A> Version: 2.24 - HA 1 TA 0 - 7.5.9.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : HTS726060M9AT00 atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === _NEC DVD+-RW ND-6500A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523476kB) Free physical memory: 295MB (302716kB) Memory in use : 42 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 8.12.2006 NeroAPI 4:24:24 PM #1 Phase 112 File APIProgress.cpp, Line 282 DVD-Video files reallocation started 4:24:25 PM #2 Phase 114 File APIProgress.cpp, Line 282 DVD-Video files reallocation completed (no file modified) 4:24:25 PM #3 Phase 111 File APIProgress.cpp, Line 282 DVD-Video files sorted 4:24:25 PM #4 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 4:24:26 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 838 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 4:24:26 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3332 First writeable address = 0 (0x00000000) 4:24:26 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3332 First writeable address = 0 (0x00000000) 4:24:27 PM #8 Text 0 File Burncd.cpp, Line 3451 Turn on Disc-At-Once, using DVD media 4:24:28 PM #9 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286127 (508:01.52, 4465MB) 4:24:28 PM #10 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO 4:24:28 PM #11 Text 0 File DlgWaitCD.cpp, Line 2903 Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R Disc Manufacturer: TTG02 - Disc Application Code: 64, Disc Physical Code: 193 4:24:28 PM #12 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= 4:24:28 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 821 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [D: _NEC DVD+-RW ND-6500A] -------------------------------------------------------------- 4:24:29 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1024 Prepare [D: _NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 2286128 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2286128 | 0 | 0x00 2286128 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 4:24:29 PM #15 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 4:24:29 PM #16 Phase 24 File APIProgress.cpp, Line 282 Caching of files started 4:24:29 PM #17 Text 0 File Burncd.cpp, Line 4278 Cache writing successful. 4:24:29 PM #18 Phase 25 File APIProgress.cpp, Line 282 Caching of files completed 4:24:29 PM #19 Phase 36 File APIProgress.cpp, Line 282 Burn process started at 6x (8,310 KB/s) 4:24:29 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2743 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 4:24:29 PM #21 Text 0 File DVDR.cpp, Line 3058 Recording mode: Sequential Recording Mode 4:24:29 PM #22 Text 0 File DVDR.cpp, Line 3214 Start write address at LBA 0 DVD high compatibility mode: Yes 4:24:29 PM #23 Text 0 File Cdrdrv.cpp, Line 9234 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 4:24:30 PM #24 SPTI -1046 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 00 00 00 00 00 22 E2 30 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 4:24:30 PM #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1779 Illegal disc D: _NEC DVD+-RW ND-6500A 4:24:30 PM #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1779 Could not perform start of Disc-at-once 4:24:30 PM #27 Phase 38 File APIProgress.cpp, Line 282 Burn process failed at 6x (8,310 KB/s) 4:24:30 PM #28 Text 0 File AudioCompilationImpl.cpp, Line 863 DRM: DRM burn session terminated. 4:24:30 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 892 DRM: Closing entire DRM handling. Bye. 4:24:30 PM #30 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 4:24:31 PM #31 Text 0 File Cdrdrv.cpp, Line 10467 DriveLocker: UnLockVolume completed 4:24:31 PM #32 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 AM File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 3:00:00 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 3:00:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Any help you could provide would be very helpful and is very much appreciated. Thank you.
A new firmware is out, if yours is 4X, here http://forum.rpc1.org/dl_firmware.php?download_id=1920 TDK is good, but I wouldn't recommend them. Try to use 1st class media like Taiyo Yuden, Verbatim and Hitachi Maxell (Made In Japan) for your next project. Meaning your burner doesn't like the media you're using. Try other high quality as mentioned above. Again, either you need to update the firmware or your burner doesn't read (doesn't like) the media you're using. You need to completely wipe out Roxio from your system. Roxio and Nero don't get along, therefore you're making coasters. Get Roxio Zapper here http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml Best of luck!!
Thanks for the reply. I just updated the firmware a couple of days ago to 2.24 Does apply to me as well? If it does how do I update it? I tried downloading the file but when I run it I get an error message. I'll get better media the first chance I get.
No it's not for your drive. The 4x means like when you updated from older was likels 2.22 to update to 2.24 that is 2x. It would have been 4.24 or something to update to 4.24 that is 4x. Where the x stands for any # after the original 2 or 4.
Thanks Whompus. I have to get better media. I tried to uninstall Nero and DVD Shrink after which I reinstalled both and I'm still getting the error messages with emphasis on illegal disc. I don't know what else to do short of wiping out the hard drive and starting fresh. I'll try the better media route tomorrow and will post my results.
I zapped Roxio using Roxio Zapper. I upgraded my media and I'm still getting the illegal disk message. Attached is the error message I received: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero API version: 7.5.9.0 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\Nero - Burning Rom Internal Version: 7, 5, 9, 0 Recorder: <_NEC DVD+-RW ND-6500A> Version: 2.24 - HA 1 TA 0 - 7.5.9.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : HTS726060M9AT00 atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === _NEC DVD+-RW ND-6500A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523476kB) Free physical memory: 308MB (316380kB) Memory in use : 39 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 15.12.2006 NeroAPI 4:23:10 PM #1 Phase 112 File APIProgress.cpp, Line 282 DVD-Video files reallocation started 4:23:10 PM #2 Phase 114 File APIProgress.cpp, Line 282 DVD-Video files reallocation completed (no file modified) 4:23:10 PM #3 Phase 111 File APIProgress.cpp, Line 282 DVD-Video files sorted 4:23:11 PM #4 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 4:23:11 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 838 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 4:23:11 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3332 First writeable address = 0 (0x00000000) 4:23:11 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3332 First writeable address = 0 (0x00000000) 4:23:11 PM #8 Text 0 File Burncd.cpp, Line 3451 Turn on Disc-At-Once, using DVD media 4:23:12 PM #9 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286127 (508:01.52, 4465MB) 4:23:12 PM #10 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO 4:23:12 PM #11 Text 0 File DlgWaitCD.cpp, Line 2903 Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R Disc Manufacturer: MCC 03 - RG20 Disc Application Code: 64, Disc Physical Code: 193 4:23:12 PM #12 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= 4:23:12 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 821 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [D: _NEC DVD+-RW ND-6500A] -------------------------------------------------------------- 4:23:12 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1024 Prepare [D: _NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 2286128 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2286128 | 0 | 0x00 2286128 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 4:23:12 PM #15 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 4:23:12 PM #16 Phase 24 File APIProgress.cpp, Line 282 Caching of files started 4:23:12 PM #17 Text 0 File Burncd.cpp, Line 4278 Cache writing successful. 4:23:12 PM #18 Phase 25 File APIProgress.cpp, Line 282 Caching of files completed 4:23:12 PM #19 Phase 36 File APIProgress.cpp, Line 282 Burn process started at 8x (11,080 KB/s) 4:23:12 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2743 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 4:23:12 PM #21 Text 0 File DVDR.cpp, Line 3058 Recording mode: Sequential Recording Mode 4:23:12 PM #22 Text 0 File DVDR.cpp, Line 3214 Start write address at LBA 0 DVD high compatibility mode: Yes 4:23:12 PM #23 Text 0 File Cdrdrv.cpp, Line 9234 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 4:23:12 PM #24 SPTI -1046 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 00 00 00 00 00 22 E2 30 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 4:23:12 PM #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1779 Illegal disc D: _NEC DVD+-RW ND-6500A 4:23:12 PM #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1779 Could not perform start of Disc-at-once 4:23:12 PM #27 Phase 38 File APIProgress.cpp, Line 282 Burn process failed at 8x (11,080 KB/s) 4:23:12 PM #28 Text 0 File AudioCompilationImpl.cpp, Line 863 DRM: DRM burn session terminated. 4:23:12 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 892 DRM: Closing entire DRM handling. Bye. 4:23:12 PM #30 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 4:23:13 PM #31 Text 0 File Cdrdrv.cpp, Line 10467 DriveLocker: UnLockVolume completed 4:23:13 PM #32 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 11:07:32 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 3:00:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) What am I doing wrong? Thanks for your help.
