I understand DVD decrypter is no longer used, so have downloaded DVD Fab Decrypter. How do I use this?? I can find anywhere on the site to tell me how to burn onto a DVDR. I see that it automatically writes to computer, but how do I know get onto a DVDR? ALL sugestions welcome please
DVDDecrypter is still used it’s just not updated anymore. It’s still one of the best rippers and burners that you can get.. Download it from here: http://home.comcast.net/~bbmayo/software.htm You can also download DVDFabDecrypter and DVDShrink from the same site. Here is a guide to use the new DVDFabDecrypter, which is updated but, is not a burner, along with DVDShrink and DVDDecrypter to Burn: http://home.comcast.net/~bbmayo/backup with DVDFABDecrypter,Shrink,&Decrypter.pdf
Cheers for that. I am there now downloading all you suggested. Personally what programmes do you think are the best to use? Main thing we want to do is (do I say it) copy our music and movie DVD's onto DVDR's
For movies I use: 1) DVD Shrink (Rip + Compress) Nero (Burn) 2) DVDFab Decryptor (Rip) DVD Shrink (Compress) Nero (Burn) I've never had a problem with this combo! You could also use AnyDVD or DVD43 in conjuction with DVD Shrink.
DVDFab Decryptor will not burn or compress it's just a ripper (a very good one =)), You need to use it along with other programs. For movies I use: 1) DVD Shrink (Rip + Compress) Nero (Burn) 2) DVDFab Decryptor (Rip) DVD Shrink (Compress) Nero (Burn) I've never had a problem with this combo! You could do: 1) DVDFab Decryptor (Rip) DVD Shrink (Compress) DVD Decrypter (Burn) 2)AnyDVD or DVD43 in conjuction with DVD Shrink. Hope this helps a little.
I’m with Deline, All I ever use for movies is DVDShrink with AnyDVD running in the background and Burn with Nero. Other combinations work as well but that works for me so I stay with it….. If you don’t want to buy AnyDVD then DVD43 is free any will do the same job, right now. It’s just not updated as often…
BUGGER! i followed the instruction thru all 3 programmes exactly to the letter thru the link to the manual and it did everything right up to the end when its meant to say 'Operation Sucessfully Completed"! There was no Chime from the Decrypter to say was finiashed and sucessful. All it did was go back to the start in the decrypter? What's going wrong? I cant seem to write onto a blank DVDR? Im doing "Dirty Dancing DVD" All help gratfully received please
OK, let's analyze - What kind and brand of disc are you using? There should have been a log in Decrypter, copy any paste it If you got it..
I Used: 1) DVDFab Decryptor (Rip) DVD Shrink (Compress) DVD Decrypter (Burn) as per the Links manual. It didnt burn to DVDR :-(
Sometimes poor quality disc will not burn right up to the edge. Set your DVDShrink to limit the Burn to 4300. To identify your disc, download this: http://dvd.identifier.cdfreaks.com/ And then read this so you can choose quality media to burn to. http://www.digitalfaq.com/media/dvdmedia.htm
This is what the Lod says. I tried to do it all again and this time a voice came over and said "Oh no" LOG: I 00:04:05 DVD Decrypter Version 3.5.4.0 started! I 00:04:05 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) W 00:04:05 Drive D:\ (FAT32) does not support single files > 4 GB I 00:04:05 Initialising SPTI... I 00:04:05 Searching for SCSI / ATAPI devices... I 00:04:05 Found 1 DVD±RW!
SKC Co.ltd is what came up when i used the DVD Identifier? Not sure what it means. We have used these discs before with out any problem at all, no all of a sudden we cant write to the disc?
There may have been a change in the media and you need to update the firmware for your DVD-RW drive. You can check for the latest firmware update here: http://forum.rpc1.org/dl_search.php Just do a search for your drive model and it will tell you the latest firmware version for your drive. Download it, double click on it and it should self install. It will then recognize the media. Cheers.
@Sabeldown Your system is FAT32 and it does not support any 4GB or over, so you'll need to convert your system into NTFS. Here's what you need to do. To convert FAT32 to NTFS from the command prompt: 1. Open Command Prompt. Click Start, point to All Programs, point to Accessories, and then click Command Prompt. 2. In the command prompt window, type: convert drive_letter: /fs:ntfs For example, typing convert D: /fs:ntfs would format drive D: with the ntfs format. You can convert FAT or FAT32 volumes to NTFS with this command.
Alkohol...... sorry but Im a blond can you explain a bit more in basic terms what to do? and where to find the command tab etc... THANKS heaps for all yopur help guys.....I feel like I moght get a dvd soon
Alkohol....thank you, have figured out what you meant to do. Am doing now and will let you know how I get on THANK YOU
I typed it in again and this time it looks like it accepted it? Do I just shut the command box now and try burning all over again now?
