OK, I'm using my PSTwo with the SwapMagic Disks... I got frustrated at the tape always getting undone for the flip top sensors, so I grazy glued them down -- apparently I've used too much glue and now it always detects the top as being open. What can I do? Can I create a short or open circuit to bypass the hardware and fool the PSTwo into thinking it's always closed?? HELP!! Thanks in advance, fee
get something that will cut through the glue and CAREFULLY use a cotton swap or something and undo the really bad idea you had. Or scrape it away as suggested above, but if you do that then there is a real good change you will have peices of glue that fall into the PS2 possible onto the motherboard. If that happens and they heat up and stick somewhere it could cause problems. Then once you do spend the whole $7 on a set of Magic Keys and do it the right way.
