I have done the factory reset, but after that I tried loading the norw 155 bin this the loader 2.4 into the receiver. It gets to the end to 100% writing and stops, never goes to finish. I did this serveral times even with files from different sites. Still I get the same results. It looks like my receiver is not programable (lol). Can anyone help me or knows what is going on? If I try to manually set the keys after the reset via channel 8282, it will not allow me. I think that is because it has to have the new bin?
Thank you for replying. That what I have been doing. The receiver will not take the 155 bin fully. It stops at ok writing...100% and never goes to finish like the 100 bin. I waited as long as 15 mins. Do I have a bad receiver?
The only thing I can think of is possibly a bad bin file download or maybe the wrong 155 for the wrong model. The Coolsat bins are usually all numbered the same but are different for each model. I would download again and try to reinstall. Jerry
Thanks Jerry: I did a download for the coolsat 6000. I have a CS600 Premium. So are you saying I have to search for that specific model? All downloads were under CS6000 only.
No, as long as your download said 6000 then its the right one but could be corrupt. Try a download from another site and see if it works. Jerry
I tried it from three different sources including one that someone had emailed from this site: same result. That is why I think I got a crappy machine.
Hi mine did the said thing, and what i did as soon as it reach 100% i turned it off with the switch, then unplug and disconnect the receiver and it works well. Please try that, also when i waited for the finish it delete then reload, so allow it to do that then turn off and, unplug and disconnect. Hope this help
