Hello and thanks in advance. 1st. time poster , and have been reading some of these forums for tips , advice , etc. I have been having problems with dvd buring , both data and video. I have tried to follow the advice and directions of others problems with nero with no success. I have uninstalled and reinstalled , used the nero cleaning tools as recently as Friday evening , and still no luck. This problem just started recently. Before that I was burning away with 0 errors. I'm pretty sure I have the lasted firmware for my burner. I use an HPdvd740e burner and it works just fine with audio and data cd's , but just won't work with dvd's. I appreciate all the help offered around here. Mark B. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=30208 bytes, created 6/11/1997 7:01:02 PM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 7.5.9.0 Internal Version: 7, 5, 9, 0 (Nero Express) Recorder: <HP DVD Writer 740e> Version: 42FF - HA 1 TA 2 - 7.5.9.0 Adapter driver: <USB 2.0> HA 1 Drive buffer : 2048kB Bus Type : set to ATAPI (3) -> ATAPI, detected: ? CD-ROM: <HP DVD Writer 740e >Version: 42FF - HA 1 TA 2 - 7.5.9.0 Adapter driver: <USB 2.0> HA 1 === Scsi-Device-Map === CdRomPeripheral : HP DVD Writer 400c atapi Port 2 ID 0 DMA: On CdRomPeripheral : ASUS CD-S480/AH atapi Port 2 ID 1 DMA: On DiskPeripheral : Maxtor 6Y160P0 atapi Port 3 ID 0 DMA: On === CDRom-Device-Map === ASUS CD-S480/AH E: CDRom1 HP DVD Writer 400c F: CDRom0 HP DVD Writer 740e K: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (83886080) Byte BUFE : 0 Physical memory : 447MB (458224kB) Free physical memory: 218MB (223280kB) Memory in use : 51 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 17.12.2006 UDF/ISO compilation 5:21:41 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 5:21:42 PM #2 Phase 112 File dlgbrnst.cpp, Line 1746 DVD-Video files reallocation started 5:21:42 PM #3 Phase 114 File dlgbrnst.cpp, Line 1746 DVD-Video files reallocation completed (no file modified) 5:21:42 PM #4 Text 0 File Isodoc.cpp, Line 6509 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 5:21:42 PM #5 Phase 111 File dlgbrnst.cpp, Line 1746 DVD-Video files sorted 5:21:42 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3332 First writeable address = 0 (0x00000000) 5:21:42 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3332 First writeable address = 0 (0x00000000) 5:21:42 PM #8 Text 0 File Burncd.cpp, Line 3451 Turn on Disc-At-Once, using DVD media 5:21:42 PM #9 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1891615 (420:21.40, 3694MB) 5:21:42 PM #10 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO 5:21:42 PM #11 Text 0 File DlgWaitCD.cpp, Line 2903 Recorder: HP DVD Writer 740e, Media type: DVD+R Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2 Disc Application Code: 0, Extended Information Indicators: 3 5:21:42 PM #12 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= 5:21:42 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 821 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1891616 (1891616) = #1891616/420:21.41 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1891616 blocks [K: HP DVD Writer 740e] -------------------------------------------------------------- 5:21:42 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1024 Prepare [K: HP DVD Writer 740e] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3874029568, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 1891616 | 0 | 0x00 0 | 1 | 1 | 0x41 | 1891616 | 0 | 0x00 1891616 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 5:21:42 PM #15 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 5:21:42 PM #16 Phase 24 File dlgbrnst.cpp, Line 1746 Caching of files started 5:21:42 PM #17 Text 0 File Burncd.cpp, Line 4278 Cache writing successful. 5:21:42 PM #18 Phase 25 File dlgbrnst.cpp, Line 1746 Caching of files completed 5:21:42 PM #19 Phase 36 File dlgbrnst.cpp, Line 1746 Burn process started at 8x (11,080 KB/s) 5:21:42 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2743 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 5:21:42 PM #21 Text 0 File Cdrdrv.cpp, Line 9234 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: RITEK... Media type ID: R03 Product revision number: 2 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 02 38 ...RITEK...R03.8 23 54 37 20 00 5D 6C 00 - B2 67 15 15 0B 0B 08 08 #T7..]l..g...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 5:21:42 PM #22 SPTI -1066 File SCSIPassThrough.cpp, Line 179 CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24 Buffer x068d6040: Len x648 5:21:42 PM #23 Text 0 File DVDPlusRW.cpp, Line 674 Start write address at LBA 0 DVD high compatibility mode: Yes 5:31:43 PM #24 SPTI -600 File SCSIPassThrough.cpp, Line 179 CdRom2: SCSIStatus(x00) WinError(121) NeroError(-600) Sense Key: 0x00 (KEY_NO_SENSE) Sense Code: 0x00 Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 Buffer x22040040: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 5:31:43 PM #25 CDR -600 File Writer.cpp, Line 299 Device not available K: HP DVD Writer 740e 5:31:51 PM #26 Phase 127 File dlgbrnst.cpp, Line 1746 Generating DVD high compatibility borders 5:31:54 PM #27 Phase 129 File dlgbrnst.cpp, Line 1746 Generating DVD borders completed successfully 5:31:55 PM #28 Phase 38 File dlgbrnst.cpp, Line 1746 Burn process failed at 8x (11,080 KB/s) 5:31:58 PM #29 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 5:32:03 PM #30 Text 0 File Cdrdrv.cpp, Line 10467 DriveLocker: UnLockVolume completed 5:32:03 PM #31 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/24/2006 7:47:00 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/24/2006 7:47:00 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hi bucky10 Here's a few suggestions. Device not available Try disconnecting it from the pc and power. Reboot pc and reconnect. Close any unneeded programs when burning. WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, Check Nero InfoTool>Aspi tab. Make sure it just shows the Nero ASPI as okay. File 'Drivers\CDRALW2K.SYS' Nero and Roxio don't always play well so you can uninstall Roxio and run the Zap Tool. Still failing - then try a good free burn program like ImgBurn. For data and video you would add the files using build mode to burn. Keep us posted.
Thanks binkie7 , I appreciate all of your help. I tried every recommendation you suggested. Unfortunately none of them worked. I'm starting to think the burner is in need of a replacement. At least earlier the dvd burn would stall out about 75% done. Now it just won't even start. It stays at 1% and doesn't progress. Thanks again.
You're welcome bucky10 Yep it could be going. Last thing to try is another pc - since it's an external much easier to hook up to another pc. Give that a go and let us know.
