The problem began when i formated my pc. as I installed everything and whent to use a dvd disk in my dvd drive i realised that the the drive wasn't reading the disk, as it cam up with blank cd. And when i whent into the device properties it say the disk is 0 bytes, whcih means it isnt reading it. I have also tried reinstaling the device and no luck. PLEAZE I NEED YOUR HELP
i have now realized that My NEC dvd drive is recognised as a cd drive and this is aloso after i have updated its firmware. PLZ HELP!
it also reads cd's but when u go into the options it doesnt tell you how much space is left on the disk just how much is used. Come on cant anybody help?
Ok you say the problem you say is that disk is appearing as 0 bytes and that your burner is detected as a cd-drive, well maybe SOMETIMES these does not affect burning or reading at all so I will first do some reading and writing test, if you have problems with these I will try updating firmware Or use Nero Info tool to make sure: 1.On configuration tap, DMA is on on your drives (although not directly connected to the problem it can be helpfull) 2.On the ASPI, that it is installed and working correctly. I will also check for any program that you may have installed that is interrupting with the drive normal operation, also upgrade the firmware (As I said before), so tell me how you do ;-)
