help with starview box super3

hi there, just bought meself a starview box super. was told to flash it, so have done, yet when i plug the box into my tv all i get is a black screen. dont know what to do so any help would be greatly appreciated.

P.S i dont have a com port on my pc so am using a usb adapter to connect the box to my pc - hope that helps

thanks in advance

 

what did you flash it with?

 

used the file GTRom_Super_6.01e

 

try this 7.05e
http://www.4shared.com/account/file/46816277/90999abe/GTRom_Super_705e.html

 

just tried that file, didnt work at all, still have the same problem, blank screen and on the box it reads 'boot' then switches to 'ld80' then finally comes to 'dl'. have not got a clue as to what to do! =S

 

tyr again are you doing as micah says here? http://forums.afterdawn.com/thread_view.cfm/642254

 

ive done it all up until the 'press' menu part, because I cant even see anything on screen. is that suposed to happen?

 

Make sure you have the scart lead connected from the Starvi*w to the TV tightly and your incoming cable plugged into the "Cable Input" socket at the back of the b0x

 

i made sure all the cables were plugged in properly, still no difference

 

whats new in 7.05e?

 

Tuner drivers.