I'm using Win XP and Nero 5.5 to burn CDRs and CDRWs, everything was working fine but recently bought some new faster CDRWs (x10 speed). My CD burner is a TEAC CD-W512EB When trying to burn to the CDRWs using Nero, initially the error was :- 21:01:25 #16 mmc -1106 File Writer.cpp, Line 308 Power calibration error 21:01:25 #19 mmc -1046 File WriterStatus.cpp, Line 180 This is not a CD-Recordable I can post full log if necessary, ASPI layer at that point was Ver=4.01 (984). My attempts to fix were as follows :- - Tried another blank CDRW (same make etc) TDK CD-RW700 high speed. - I upgraded Nero from 5.5.5 to latest 5.5.9 ? - then got a slightly different error :- 11:37:52 #19 MMC -1106 File Writer.cpp, Line 330 Power calibration error 11:37:52 #22 MMC -1046 File WriterStatus.cpp, Line 184 Illegal medium 11:37:52 #23 TRANSFER -18 File WriterStatus.cpp, Line 184 Could not perform EndTrack 11:37:52 #24 CDR -201 File WriterStatus.cpp, Line 187 Invalid writestate again see end for full log of 2nd error. - Having read read the FAQ etc, I decided to check my ASPI files, the recommended checking software said they were out of date, so I downloaded Aspi 4.71 from Adaptec and ran the KILLASPI.BAT first, then the install.bat XP32. Bit I'm still getting the same problem burning CDRWs using Nero. I've also checked the DMA settings for Primary or Secondary Contoller Properties > Advanced Settings and is "DMA if available" . Any ideas would be much apprieciated. Also tried InCD which has worked before for slower CDRWs but now gives InCD Error Code of [0051-0003-0073-0003] Disc Error Occured. Whatever this means. Also upgraded InCD to latest version. Pete -------- 2nd Log Windows XP 5.1 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 06/05/2002 11:01:22 ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.50, size=131072 bytes, created 11/07/2002 22:03:00 Nero Version: 5.5.9.0 Recorder: <TEAC CD-W512EB> Version: 2.0A - HA 1 TA 0 - 5.5.9.0 Adapter driver: <atapi> HA 1 Drive buffer : 2976kB Bus Type : default (0) -> ATAPI CD-ROM: <PIONEER DVD-ROM DVD-116>Version: 1.07 - HA 1 TA 1 - 5.5.9.0 Adapter driver: <atapi> HA 1 Bus Type : default (0) -> ATAPI === Scsi-Device-Map === DiskPeripheral : Maxtor 5T060H6 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TEAC CD-W512EB atapi Port 1 ID 0 DMA: On CdRomPeripheral : PIONEER DVD-ROM DVD-116 atapi Port 1 ID 1 DMA: On DiskPeripheral : TOSHIBA MK6412MAT QUARTANT Port 2 ID 0 DMA: ? ======================= AutoRun : 0 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 34603008 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 255MB (261600kB) Free physical memory: 124MB (127260kB) Memory in use : 51 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Enabled (1) Wizard: On CD-ROM (ISO) 12.7.2002 11:37:38 #1 Text 0 File Isodoc.cpp, Line 6002 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 11:37:38 #2 Phase 72 File dlgbrnst.cpp, Line 1560 BURN-Proof activated 11:37:38 #3 Text 0 File Reader.cpp, Line 118 Reader running 11:37:38 #4 Text 0 File Writer.cpp, Line 129 Writer TEAC CD-W512EB running 11:37:38 #5 Text 0 File Burncd.cpp, Line 3474 Turn on Track-At-Once, using CD-R/RW media 11:37:38 #6 ISO9660GEN -11 File geniso.cpp, Line 4427 First writeable address = 0 (0x00000000) 11:37:38 #7 Text 0 File ThreadedTransferInterface.cpp, Line 685 Setup items (original item values) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 600 (600) = #600/0:8.0 relocatable, CD pos for caching/writing not required/required, no patch infos -------------------------------------------------------------- 11:37:39 #8 Text 0 File DlgWaitCD.cpp, Line 198 Last possible write address on media: 359848 (79:59.73) Last address to be written: 599 ( 0:09.74) 11:37:40 #9 Text 0 File DlgWaitCD.cpp, Line 1393 Recorder: TEAC CD-W512EB; CDRW code: 00 97 10 00; CD manufacturer unknown ATIP Data: Special Info [hex] 1: A3 00 CE, 2: 61 0A 00 (LI 97:10.00), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 24 1A D8, 2: 26 B2 48, 3: 00 00 00 (invalid) 11:37:44 #10 Text 0 File ThreadedTransferInterface.cpp, Line 835 Prepare recorder TEAC CD-W512EB for write in TAO DAO infos: ========== MCN: TOCTYPE: 0x0 Close Session Tracks 1 to 1: TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 1536000 11:37:44 #11 Text 0 File ThreadedTransferInterface.cpp, Line 863 Removed 2 run-out blocks from end of track 1. 11:37:44 #12 Text 0 File ThreadedTransferInterface.cpp, Line 685 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 600 (600) = #600/0:8.0 relocatable, CD pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 598 blocks [TEAC CD-W512EB ] -------------------------------------------------------------- 11:37:44 #13 Phase 24 File dlgbrnst.cpp, Line 1560 Caching of files started 11:37:44 #14 Phase 25 File dlgbrnst.cpp, Line 1560 Caching of files completed 11:37:44 #15 Phase 36 File dlgbrnst.cpp, Line 1560 Burn process started at 10x (1,500 KB/s) 11:37:44 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1967 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 11:37:44 #17 Text 0 File Mmc.cpp, Line 16205 Set BUFE: BURN-Proof -> ON 11:37:52 #18 SCSI -1106 File Cdrdrv.cpp, Line 1406 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x024A0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1F 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x73 0x03 11:37:52 #19 MMC -1106 File Writer.cpp, Line 330 Power calibration error 11:37:52 #20 Text 0 File ThreadedTransfer.cpp, Line 222 all writers idle, stopping conversion 11:37:52 #21 SCSI -1046 File Cdrdrv.cpp, Line 1202 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 11:37:52 #22 MMC -1046 File WriterStatus.cpp, Line 184 Illegal medium 11:37:52 #23 TRANSFER -18 File WriterStatus.cpp, Line 184 Could not perform EndTrack 11:37:52 #24 CDR -201 File WriterStatus.cpp, Line 187 Invalid writestate 11:37:52 #25 TRANSFER -18 File WriterStatus.cpp, Line 187 Could not perform EndTrack 11:37:52 #26 SCSI -1046 File Cdrdrv.cpp, Line 1202 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 11:37:52 #27 MMC -1046 File WriterStatus.cpp, Line 226 Illegal medium 11:37:52 #28 TRANSFER -19 File WriterStatus.cpp, Line 226 Could not perform Fixation 11:37:52 #29 Text 0 File WriterStatus.cpp, Line 235 falling back to disc fixation 11:37:52 #30 SCSI -1046 File Cdrdrv.cpp, Line 1202 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 11:37:52 #31 MMC -1046 File WriterStatus.cpp, Line 226 Illegal medium 11:37:52 #32 TRANSFER -19 File WriterStatus.cpp, Line 226 Could not perform Fixation 11:37:52 #33 Phase 38 File dlgbrnst.cpp, Line 1560 Burn process failed at 10x (1,500 KB/s) 11:37:52 #34 Text 0 File Scsicmd.cpp, Line 383 SCSI not using temporary buffers 20 out of 20 temporary buffers allocated Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0001) built by: WinDDK, size=16512 bytes, created 06/05/2002 11:01:14 Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hello I seem to be getting the exact same error code 0051 0003 0073 0003 Wondering if you were able to work that out? thanks, Peter
Had a similar problem both with Nero & InCD using Packard Bell CD-W Rewriteable 1X-10X and tried all ways to resolve the 'power calibration error' (upgrading to latest release etc. etc.). I have a BenQ CRW8432IA - have resolved problem by purchasing PNY Technologies CD-RW Rewriteable media 1x-4X which work ok every time for Nero & InCD, so suggest you try another media manufacturer, my drive is 8x4x32 and my understanding is that the 4x relates to the writing speed i.e. 600kb/s so I would suggest you buy media that is up to thie speed of your drive in write mode and NOT anything greater! Hope this helps Pete
Yes I did solve the problem, all that was needed was to upgrade my TEAC CD Writer to the latest version of their firmware, available from there site. I was a little worried about all the warnings on their site regarding only using on particular batches/versions of the TEAC CD-W512EB burner, but I went ahead and it immediately solved the problem. Now burns at 10x on those CDRWs.
