I've just purchased a 2 way splitter for the cable from the wall. however, when i connect the second connection to another tv in another room the signal is all messed up( that is before it connects to the chorus box).I've a co-axial connector on the end of the cable to change it to analogue. But only seem to get 3 channels, utv, tv3, and rte2 and the rest have interference. is there any way of fixing this and getting all the analogue channels? The main box works fine.
y splitters are known to be faulty,coaxial connections did u do them urself or makeup check braiding is not touching centre wire,if u leave out splitter out and wire directly does it work?is ur emu on in box when connected
i purchased the 2 way splitter and co-axial connector from maplins yesterday. i connect from the wall socket into the 2 way splitter one lead connects to the chorus box and the other connects to the tv in the other room. the lead in the other room is a coaxial lead connected from the splitter with a co-axial converter. the splitter is brand new so it must be something else
I got a f plug to coaxial connector on the end of the cable from the splitter and connected it to the second tv. however, the signal is still messy. can get bbc2 and mtv only. what am i doing wrong?
