***** How to do the JTAG Hack/Dump NAND/Xell Tutorial *****

I am having an issue with nandpro20d it opens for just a second I see a black window then it closes. I got the portio95 driver installed. Im using XP pro is there a minimum ram requirement for this to run? My pc is old and only has 768megs of ram its a compaq presario 5000us. If there is a minimum ram requirement would that cause nandpro20d to crash? If not what could cause that? I was using my pc to flash drives before and it worked for that. should I remove my sata chip set? Any help would be greatly appreciated thank you.

 

umm if the dashboard isn't exploitable can you still install xell to get the cpu key and is the jtag wires nessisary for this ?
thanks in advance

 

only with a reset glitch chip and an appropriate programer. but then if you spend the cash on that you can jtag anyways. note the glitch chip only works on hdmi models xenon is not compatible. your better off just getting a xbox with a jtagable dash unless your jtaging a slim due to costs.

 

actualy i have a nandX and the cool runner i updated the nand X to 3.0 i've never recovered the dvd key before and don't want to damage the console i know you can't get the cpu key once it's locked so do i write xell and do the jtag boot get the key and flash back ?
or run the glitch on the chip and see about gettin it from the freestyle dash it's a jasper i'm not shure what memory it has i'm waitin to hook it up to the tv and see

 

you also have to have 2 matching nand dumps before you install anything otherwise you wont be able to recover your nand after and you'll end up with a expencive paper weight. Another words if xell or xellous is installed you will lose your nand all together without matching dumps because it will have been over written. if you dont have matching nand dumps dont proceed at all. once you have matching dumps xell can be written as long as you have a glitch chip installed that is a nessesity to. xell or xellous is the only way to get the key you seek

 

so do install xell on the cool runner or to the board with the coolrunner runnin the glitch and yeah i've jtagged a few so i know to hav identical dumps am currently dumpin the second and will dump a third

 

Ok so I have done this before but only the soldering and dumping the NAND I'm good with that but the thing is what do u do with the NAND after u dumped it do u re flash it don't this the bit I'm stuck on plz help

P.S. had a thought is It wen u dump the NAND u are making it able to do all like fsd and all that (question mark button don't work)