How to mod a controler...

Discussion in 'Xbox - Hardware mods' started by Ca$h, Oct 10, 2005.

  1. Ca$h

    Ca$h Regular member

    Joined:
    Jun 23, 2005
    Messages:
    345
    Likes Received:
    0
    Trophy Points:
    26
    [bold]How To Mod a Controller
    by Ca$h[/bold]

    [bold]Materials Needed[/bold]
    1) A xbox controller
    2) A soldering iron
    3) An Usb extension cord

    [bold]Procedures[/bold]

    [bold]1)[/bold] First you will take your Usb extension cord and cut it right down the middle.
    [bold]2)[/bold] Do you see that red line? Cut on that red line and then strip the wires for the controler and the usb cord.
    http://putfile.com/pic.php?pic=9/26611345521.jpg&s=x2
    [​IMG]

    http://putfile.com/pic.php?pic=9/26611362818.jpg&s=x2
    [​IMG]
    [bold]3)[/bold] Now take that half of the Usb cord (^^) and soder the Red, Green, Black, and white wires to gether.
    [bold]4)[/bold] Make sure you wrap each wire with electrical tape, then the new controler/usb cord.
    http://putfile.com/pic.php?pic=9/26611395939.jpg&s=x2
    [​IMG]
    [bold]5)[/bold] Now take that (^^^) part and the other half of the Usb cord.
    http://putfile.com/pic.php?pic=9/26611432193.jpg&s=x2
    [​IMG]

    [bold]6)[/bold] Now take the cover off the controller port and the metal cover, beneath the metal cover you should see the wires.
    [bold]7)[/bold] With the half of the usb cord u still have, carefully sodder the green wire to the green wire, red to red, black to black, ect. Do nothing with the yellow wire.
    [bold]8)[/bold] Burn a whole in the black top of the connecting port so the usb wire can come out.
    [bold]9)[/bold] Your finished product should look like this.
    http://putfile.com/pic.php?pic=9/26611454532.jpg&s=x2

    [​IMG]


    If you want to use the controler with the xbox again, Connect the two usb ports, and then plug the controller port into your xbox, you xbox won't even know the difference from a regular conotroler. You can now plug usb sticks to your xbox and your controler into your computer. Enjoy!


    http://www.redcl0ud.com/xbcd.html is where you will find the software to use a controller on the computer.


    If this didn't help, [​IMG] is the basics of moding a controller.

    *edit I couldn't get the pics to show up, so click on the url's to see the pics
     
    Last edited: Oct 16, 2005
  2. Oner

    Oner Moderator Staff Member

    Joined:
    Dec 8, 2002
    Messages:
    2,905
    Likes Received:
    2
    Trophy Points:
    68
    I edited it so it would work but you should redo the pics as they are blury and a bit big. What you have to do with putfile pics is right click on the image (while viewing it in putfile) and select properties. That will give you the direct url for the pic itself not a go around url.
     
  3. Ca$h

    Ca$h Regular member

    Joined:
    Jun 23, 2005
    Messages:
    345
    Likes Received:
    0
    Trophy Points:
    26
    Hey, Thanks

    I am busy today, soo I will do that tomorrow...
     
    Last edited: Oct 12, 2005

Share This Page