Discussion in 'PS2' started by jjax, Jan 15, 2006.
dont need it now
soz ment measurements were i put measyrements
dabundan:i had the same problem i lifted the tray a bit and shone a light in my ps2 and i could see the pin and when u've took of the front bit of the ps2 at each end of the tray(left and rigt) the be's a bit stiking out just lift that a tiny bit then put the light on and u will see it and when you've opened the trey(with the slide card) and pushed it back in put the slide card in and turn the bottom bit left to slide the pin to lock the tray(i have to do move the bottom bit to hook the slide card to the pin then i had to slide it to the left) from bhee
This is great and all, but where can I find a demonstration on how to take off the front cover?
I tried this with my last PS2 and broke it...
I just need to see a video or guide that shows me HOW TO TAKE OFF THE FRONT COVER OF THE DISC TRAY, because I've seen slide card guides a gajillion times already!
(Not to take away from this one, it's very nice)
So all i need for my ps2 to play backup games is the PS2 SLide Tool & PAL Swap Magic V3.6 Software which costs hardly anything?
can this end up ruining the ps2?
OKAY, I need some serious help.
FIRST OFF- I'm describing a problem from a fat ps2
I followed this tutorial on another website and everything was going good, right up until I had to use a home made disc swapper, I used a credit card, and the disk popped out fine, I put in the CogSwap disc and pushed it in. I used my homemade creditcard/swapper and push the white thing back over...so I'm like ok here it goes!
I hit X to play the disc and screen goes RED.
I waited a few minutes thinking it might still be alright....waited...nothing seemed to be happening
I hit the eject button, but NOTHING happened, I freaked out so I turned off my ps2.
Turning it back on, I hit the eject button and still nothing !!!!! WTF!!!!! I hit it again, the little blue light flashing in my face, nothing happens again!
I can hear it trying to get back on track or something, but it seems like it THINKS the disc is already ejected...
I have been googling for hours before and I decided to post this for myself.
aye you sure you pushed the white cog with your card all the way back to the right?
TBandit, you push it to the right to get the disc out...
I did that, and then I put in my CogSwap.
Pushed it back in, then tried to push the white thing back to the left, (maybe I didn't push it all the way to the left?).
It had some error, and ever since I can't get it to eject.
You said that the disc tray tries to eject but ends up not coming out, maybe when you were pusing the white cog in under the disc tray you pushed it off track or something. If your really desparate you should go ahead and open the ps2 and check the tray if you havent already
Dude, TBandit, I'm already that far, I have my ps2 open and I can even see the laser at where I'm at.
I still can't get UNDER the tray to where the white cog is...I can't force it out, feels like it will break is I pull/push it out too hard.
damn this sucks.
hey you think you can post a video or some pics so i can look at how far you are and what the inside of the ps2 looks like to so i know where your at
hi i need 2 know how 2 swap disks on ps2 slim SCPH-75004. i have a swapset 2006 but i dont know how to fit it well. i have also a swap magic cd/dvd.
go here, down load the huge collection of tutorials, a tut on how to remove the front disc tray cover is in there, saves having to look round the net 4 it.
Ok all, here's a question for ya's, I have learned so much about exploiting, copying and the use of the MC, hdd, and the usb flash drive, using such tools as ARMAX, CODEBREAKER and such, I have even learned how to create a fliptop case from scratch, but believe me, buying one is better, unless u want to go the el-cheepo way, and just take off the top of your fat ps2, and open the drive up and just swap the discs that way, it would work, of course given that you don't have pets in your home to scamper all over the place.
But, my question is this, after all the tutorials that I have read, here and everywhere else, I can not find one single pic showing me how to use the slidetool on a Model: SCPH-50010 Date Code: 3C which according to one report means its a Version 9 Fat Ps2, while another says its a Version 10 Fat Ps2 (with of course the Hard drive and Network connections which came with it)
The problem with mine, is that I can not find this pin that you peeps talk about, I looked under the tray, and I don't know what exactly to look at, because there is no pic showing this on my version, could it be possible that the pin is broke off?, considering I bought it off the net years ago. I just took off the front of the tray no problem, but I lifted the tray up and can't seem to find this pin, I even put a light under the tray and can't find it. Help would be greatly appreciated, sorry for the long post.
how much would you pay for a new ps3?
...I found this clip - http://elecnode.justgotowned.com
try pointing your browser away from my spam - it's not porn, it's a way to get a free system and it got me a free 'get out of Afterdawn' pass
spammer put out of his misery
may want to remove the hyperlink in case some noob clicks on it without realising what it is.
the link is fine, i swapped the spam link for something more appropriate
Separate names with a comma.