how to turn emu

Hi Just got a supper box and scaned all the channels in. I am on nthell dublin found 183 stations but can only view the free to air ones. Tried to put in 1570 to turn on emu but noting happened. Please help

 

You need to flash it. Look at Celt's Guide

 

It is flashed to 7.09 I cant get the scren up to turn om the emu I go to menue and press 1570 and noting happens

 

i have the exact same problem with s-view super, 1570 just aint happenin, any suggestions would be greatly appreciated

 

jimmy and fura - If you definately have firmware installed then try this, Menu, Parental Control OK, type in 2004 and then press INFO button and type 2004 again, that should sort it for you and bring up the Cas System Menu.

 

just tried it there malci, cheers anyway, didnt work.
maybe rubbish firmware? didnt get it from here

 

Well try this then - these are the only way to access Cas System Menu, if you have used the previous, thenGo bak into Parental Control and scroll down to Second PIN option and enter 1668, give that ago.

 

Press Menu > System Information and double check the verion installed.

Press Menu , while Installaion is highlighted , type in 1570 and you should now see the CAS menu , bottom option is EMU , make sure it is ON , exit 3 times and turn S*Y Sports on and it should update.

Please make sure you do it slowly and point the remote at the SV b0x and not the TV lol

 

Hi all Tried all above no luck. I then reflashed to 7.05e and all worked fine Pressed Menu type in 1570 turned on emu and on came picture. I said it was flashed to 7.09 I should have said 7.08 Every think works fine now THANKS ALL FOR YOUR HELP

 

hi again, tried all of the above to no avail, so will be putting firmware on again to see what happens, ill let you know, thanks for all your help by the way.

 

LOL - that is the FTA version, you did not have any firmware on after all, ah well, glad you have flashed it now, but the 7.09 is the latest, if you are satisfied - then leave well alone.

 

Jimmy, check and double check that you have firmware on the box, on the other hand just go ahead and install firmware - it will work.

 

pheeeeeeeeeeeew finally got it sorted, put on 709 and it works, having probs with channels now, after re-scan alot are assigned to channel 3000 with the name simply as 'TV 2080' as the channel name? any more ideas?

lol ive already asked enough of you guys, and thanks alot for the help on the previous matter.

 

to quote myself

sorted it by doing a factory reset then scanning for channels again, then they all came up and basically were in the right order and named.

thanks very much for the help folks.

 

Well done jimmy, it's amazing how everything works out when you install firmware - pleased you gor there in the end lol. Cheers and good luck