Hi i cant burn a DvD-r and my burner says it supports dvd-/+r and rewriteable.. i heard it might be a firmware issue.,. i dont know what firmware is.. my burner is an i/o magic or something.. there website is www.iomagic.com . here is the log of my imgburn, i get the same thing with dvd decrypter. I 18:48:22 ImgBurn Version 1.1.0.0 started! I 18:48:22 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 18:48:22 Initialising SPTI... I 18:48:22 Searching for SCSI / ATAPI devices... I 18:48:22 Found 1 DVD-ROM and 1 DVD±RW! I 18:49:24 Operation Started! I 18:49:24 Source File: C:\Documents and Settings\daniel\My Documents\Downloads\MODERN_LOVE.ISO I 18:49:24 Source File Sectors: 1,469,356 (MODE1/2048) I 18:49:24 Source File Size: 3,009,241,088 bytes I 18:49:24 Source File Implementation Identifier: DVD Shrink I 18:49:24 Destination Device: [1:0:0] GENERIC DVD RW 8XMax 120I (D (ATA) I 18:49:24 Destination Media Type: DVD-R (Disc ID: AML) (Speeds: 2x, 4x) I 18:49:24 Destination Media Sectors: 2,298,496 I 18:49:24 Write Mode: DVD I 18:49:24 Write Type: DAO I 18:49:24 Write Speed: 4x I 18:49:24 Link Size: Auto I 18:49:24 Test Mode: No I 18:49:24 BURN-Proof: Disabled I 18:49:24 Filling Buffer... I 18:49:25 Writing LeadIn... W 18:49:46 Failed to Write Sectors 32 - 63 - Power Calibration Area Error W 18:49:46 Retrying (1 of 20)... W 18:49:46 Retry Failed - Invalid Field in CDB W 18:49:46 Retrying (2 of 20)... W 18:49:46 Retry Failed - Invalid Field in CDB W 18:49:46 Retrying (3 of 20)... W 18:49:46 Retry Failed - Invalid Field in CDB W 18:49:46 Retrying (4 of 20)... W 18:49:46 Retry Failed - Invalid Field in CDB W 18:49:46 Retrying (5 of 20)... W 18:49:46 Retry Failed - Invalid Field in CDB W 18:49:46 Retrying (6 of 20)... W 18:49:46 Retry Failed - Invalid Field in CDB W 18:49:46 Retrying (7 of 20)... W 18:49:46 Retry Failed - Invalid Field in CDB W 18:49:46 Retrying (8 of 20)... W 18:49:46 Retry Failed - Invalid Field in CDB W 18:49:46 Retrying (9 of 20)... W 18:49:46 Retry Failed - Invalid Field in CDB W 18:49:46 Retrying (10 of 20)... W 18:49:46 Retry Failed - Invalid Field in CDB W 18:49:46 Retrying (11 of 20)... W 18:49:46 Retry Failed - Invalid Field in CDB W 18:49:46 Retrying (12 of 20)... W 18:49:46 Retry Failed - Invalid Field in CDB W 18:49:46 Retrying (13 of 20)... W 18:49:46 Retry Failed - Invalid Field in CDB W 18:49:46 Retrying (14 of 20)... W 18:49:46 Retry Failed - Invalid Field in CDB W 18:49:46 Retrying (15 of 20)... W 18:49:46 Retry Failed - Invalid Field in CDB W 18:49:46 Retrying (16 of 20)... W 18:49:46 Retry Failed - Invalid Field in CDB W 18:49:46 Retrying (17 of 20)... W 18:49:46 Retry Failed - Invalid Field in CDB W 18:49:46 Retrying (18 of 20)... W 18:49:46 Retry Failed - Invalid Field in CDB W 18:49:46 Retrying (19 of 20)... W 18:49:46 Retry Failed - Invalid Field in CDB W 18:49:46 Retrying (20 of 20)... W 18:49:46 Retry Failed! - Invalid Field in CDB E 18:49:48 Failed to Write Sectors 32 - 63 - Power Calibration Area Error I 18:49:48 Synchronising Cache... E 18:49:49 Failed to Write Image! E 18:49:49 Operation Failed! - Duration: 00:00:24 I 18:49:49 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 21 KB/s (0.0x) Thank you for your help.
The only thing I can find close to your burner is here http://forum.rpc1.org/dl_result.php?kaj=1&isces however I would let the experts have a look before updating your firmware. When you open DVD Decrypter can you post the burner details from that prog.
It can also be poor quality media. Or a brand of media that is not supported with your drive. I am no expert, just a thought!
thanks.. but i fixed it... it turns out it was the firmware. If anybody else has this problem go to www.iomagic.com and find the firmware updates for their drive. thanks again people
@frank1099 I'm glad the firmware helped. One other thing you should do to avoid problems is switch the media your using to Taiyo Yuden or Verbatim. AML is not good media and can cause you problems down the road.
