Hello everyone, I am having problems trying to back a DVD up. I have been using DVD Shrink and I have not had any probles untila a couple days ago. When the burning process starts, it encounters an error and the disc is kicked out, the it shows me a big message. I tried burning with AVS disc creator but didnt work either. The error message I get is the folloing. Can someone help me please? Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 AM Nero Version: 6.6.0.8 (Nero Express) Recorder: <Memorex 16X-DDL-IN> Version: 1.A0 - HA 1 TA 1 - 6.6.0.8 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <Memorex 16X-DDL-IN >Version: 1.A0 - HA 1 TA 1 - 6.6.0.8 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD1200JB-00GVC0 atapi Port 0 ID 0 DMA: On DiskPeripheral : ST3400633A atapi Port 0 ID 1 DMA: On CdRomPeripheral : HL-DT-ST CD-RW GCE-8400B atapi Port 1 ID 0 DMA: On CdRomPeripheral : Memorex 16X-DDL-IN atapi Port 1 ID 1 DMA: On OtherPeripheral : __RAID___DUMMYDEVICE________ vdrv8000 Port 2 ID 0 DMA: Off CdRomPeripheral : VXRV DVD-RAM DVDR S508.00 vdrv8000 Port 2 ID 1 DMA: Off === CDRom-Device-Map === HL-DT-ST CD-RW GCE-8400B E: CDRom0 Memorex 16X-DDL-IN G: CDRom1 VXRV DVD-RAM DVDR S50 F: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 735MB (753132kB) Free physical memory: 123MB (126532kB) Memory in use : 83 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 10.12.2006 UDF/ISO compilation 2:00:11 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 2:00:12 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 2:00:12 PM #3 Text 0 File Isodoc.cpp, Line 6179 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 2:00:13 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 2:00:13 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 2:00:13 PM #6 Text 0 File Writer.cpp, Line 122 Writer Memorex 16X-DDL-IN running 2:00:13 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 2:00:13 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 2:00:14 PM #9 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using DVD media 2:00:14 PM #10 Text 0 File DlgWaitCD.cpp, Line 260 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286159 (508:02.09, 4465MB) 2:00:14 PM #11 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO (enabled: CD) 2:00:14 PM #12 Text 0 File DlgWaitCD.cpp, Line 2339 Recorder: Memorex 16X-DDL-IN, Media type: DVD-R Disc Manufacturer: MCC 03 - RG20 Disc Application Code: 64, Disc Physical Code: 193 2:00:14 PM #13 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:00:14 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286160 (2286160) = #2286160/508:2.10 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286160 blocks [Memorex 16X-DDL-IN] -------------------------------------------------------------- 2:00:14 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [Memorex 16X-DDL-IN] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682055680, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286160 | lead-out | 1 | 0x41 | 0x00 2:00:14 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 2:00:15 PM #17 Text 0 File Burncd.cpp, Line 4040 Cache writing successful. 2:00:15 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 2:00:15 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 16x (22,160 KB/s) 2:00:15 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:00:15 PM #21 Text 0 File DVDR.cpp, Line 2241 Recording mode: Sequential Recording Mode 2:00:15 PM #22 Text 0 File Mmc.cpp, Line 21319 Set BUFE: JustLink -> ON 2:00:15 PM #23 Text 0 File DVDR.cpp, Line 2387 Start write address at LBA 0 DVD high compatibility mode: Yes 2:00:15 PM #24 Text 0 File Cdrdrv.cpp, Line 8430 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-ROM (0), Part Version: 0 Disc Size: 120 mm, Maximum Rate: 2,52 Mbps (0 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: ? Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 0 h (?) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 2:00:18 PM #25 Text 0 File Cdrdrv.cpp, Line 1287 14:00:18.234 - Memorex 16X-DDL-IN\H1 T1 : Queue again later 2:01:03 PM #26 SCSI -1135 File Cdrdrv.cpp, Line 1435 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0A900000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x17 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 2:01:03 PM #27 CDR -1135 File Writer.cpp, Line 311 Write error 2:01:04 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 2:01:04 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 2:01:04 PM #30 Text 0 File DVDR.cpp, Line 2650 EndDAO: Last written address was 5887 2:01:04 PM #31 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 16x (22,160 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 1:16:24 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/24/2006 7:47:00 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:42 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hello. Edit out your Name and Nero serial number beginning 1A... at the beginning of your log. Click the paper/pencil icon in the upper right of your post to enter edit mode. You're using an older version of Nero. You might want to uninstall your current version after writing down your serial number and then run the Nero 6 Clean Tool: http://ww2.nero.com/nero6/enu/Nero_6_CleanTool.html Next download and install the following two Nero 6.6.0.18 packages: Package 1: http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe Package 2: http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe Try slowing your burn speed to 8X or 6X. I think there's a newer firmware for your burner, version 1.A4 available here: http://memorex.com/html/download_software_now.php?CID=11&PID=872 Try reducing your target output size to 4400mb. In DVD Shrink, under the Edit menu select Preferences... and then the Preferences tab. Select Custom from the dropdown "size" menu and then enter 4400 in the mb size box. This prevents burning all the way to the outer edge of the disk. You might also try burning your ISO with ImgBurn: http://www.imgburn.com The Roxio CDRAL driver is installed which can sometimes cause problems. You may need to uninstall any Roxio software that is installed and then run the Roxio zapper: http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml http://kb.roxio.com/content/kb/EE6000061
Hey laddyboy, thanks for the quick response. I uninstallled Nero and installed the version you told me. I followed the steps you gave me and I was able to burn the files manually. I havent tried to burn a DVD automatically using DVD shrink yet, Ill do that when I get more hard copies.
Hey, I was able to burn the files, however, the DVD is not playable. All my DVD players wont recognize it. I intalled the version of Nero I was told but what I didnt do was create a ISO file, how can I do that and what would be the next step to follow?
I might also want to add that I no longer have the hard copies of the DVDs I couldnt burn, but I do have VOB files saved in my computer and I am able to play them so I know they're OK, its the burning process that I have trouble with.
You don't have to have an ISO file. A folder of video files is fine. Whether you start with an ISO file or a folder of video files shouldn't make any difference. Did you slow your burn speed to 4X or 8X or did you burn at 16X again? It's very difficult to get a good quality burn at 16X with most systems and media. If you're burning at a reduced speed with the same Verbatim media, your burns should be playable by your standalone players. Did you upgrade your burner's firmware? If you want to try ImgBurn, use the Build mode of ImgBurn first to create an ISO file from the video folder. Then use the Write mode to burn the ISO file you created.
Hey Laddyboy, I think its working. I updated the firmware and slowed the burning speed to 4x. so far its working (33%) because it wasnt working earlier, it would start burning and stop at 2%. I gotta test tomorrow morning Ill just leave it burning and let you know later was happened..... now at 49% hope it works.
