I tried the newest codes, but they don't work!

00-E7 0D 6A A5 53 E3 89 B3

01-73 23 3B 23 1B 03 48 51

These were the codes that I put but my box still doesn't have any channels on it :-(

Help!

PS: Any idea why V**g*n M*d*a keeps on changing them everyday now?

 

They have just changed again.

 

Ok so is there a guide on how to update my firmware so that instead of manually having to key in the new codes everyday, that they change on their own?

Thanks for any help given in advance!

 

You will need to know if you have a clone or genuine

Please click the SV EV Info link at the end of my post to compare clone V genuine boxes.

You will need a null modem cable DB9F to DB9F.

Null modem info

http://www.maplin.co.uk/Search.aspx?criteria=L71BT&DOY=2m6

If your pc does not have a serial port you will need a USB to serial port adapter to use in conjunction with the null modem cable.

USB Adapter info

http://www.maplin.co.uk/Module.aspx...uName=USB to Serial 9-Pin Male Adaptor class=

These two cable links are only for reference as they can be purchased alot cheaper on fleabay.

All firmware/loader can be found in the link at the end of my post marked Eamos FTA Library.

You will need the GTromloader, (Starvi*w Software Uploader), found in the Starvi*w software folder of the link.

You will need version 4.00 firmware for GENUINES found in "Starvi*w" firmware folder.
You will need version 2.57_FIXED firmware for CLONES found in "Starvi*w" firmware folder.


Updating Firmware

Connect your box and PC with a Null modem cable and switch on the cable box and put it on STANDBY.
(The Starview does not need to be connected to TV to update it with GTROM)

Open GTROM Loader software make sure that you set the correct COM PORT
that matches the one that is being used

Make sure App file only is selected, then click Bin File & browse to the firmware where you downloaded it to on your PC.

Run the GTROM loader by pressing Download and you will see the % progress increase
then Download completed message on your PC.
Wait until you see the DOWNLOAD COMPLETE pop up on your PC before
removing the NULL MODEM CABLE. The Starvi*w will then reboot

Turn off and turn back on , then plug your tv cable and scart back in

 

Im lucky to have a genuine one, Nobody wants the clone to explode, lol

 

LOL and best of luck and after this no more looking for codes again

 

Thanks for the info scouser but until I update the firmware I would like the new codes if possible, Pretty please?

 

If and when Ferg has the time they will be here http://forums.afterdawn.com/thread_view.cfm/531363 I have retired from the codes scene.

 

Thanks fergus

 

Probably go again and again and again........

 

Scouser don't say that well hopefully not again today that is :-(

 

Maybe not today but what about tomorrow

 

Its a Saturday, Everyone needs a day off once in a while, right?