Ibook G3 500 OS X 10.4 Tiger Install

Discussion in 'Mac - General discussion' started by SL7Rips, Jun 19, 2008.

  1. SL7Rips

    SL7Rips Regular member

    Joined:
    Sep 12, 2007
    Messages:
    748
    Likes Received:
    0
    Trophy Points:
    26
    i have a Ibook G3 500 and it currently has OS 9.2 installed and im tryint o install OS X 10.4 Tiger

    after i insert the Disc the Installer icon pops up and it says restart to Start install process. so i Click the Restart button on the installer. and the Cd drive spins up and the computer will freeze.
    also i tried installing the OS from Holdin C on startup and it wont bood from cd

    Any Ideas
     
  2. susieqbbb

    susieqbbb Guest

    Ok question:

    Is it a white and blue g3 or a white g3??

    If it is a white g3 you need to upgrade your firmware on your g3 you can find the update at www.apple.com and flash your new firmware then make sure that your settings for mac os x are 640x480 for display settings this will make sure the installer runs in safe mode when you boot from it this will then install mac os x tiger and run it back in your old settings of 800 x600 or what ever your settings are.

    For some strange reason mac os x tiger doesn't like certain graphics cards and has issues booting them i had a apple g3 tower and it wouldn't boot 10.4 at all untill i updated the firmware and ran the graphics in 640x480 after that i could run my screen in 800x600 without any issues.

     
  3. SL7Rips

    SL7Rips Regular member

    Joined:
    Sep 12, 2007
    Messages:
    748
    Likes Received:
    0
    Trophy Points:
    26
    its the White Dual USB NoTebook Well Now Its Red..
    [​IMG]
     
  4. susieqbbb

    susieqbbb Guest

    Ok if it is a dual usb you need to update your firmware first issue in doing this 9.2 no longer connects to the internet so you need to download the file on windows pc and transfer it to a usb thumb stick and then to you mac to perform a firmware update.

    After make sure your display settings are in 640x480 in mac os 9.2 if they are not you will have a heck of a time getting tiger to boot.

    then go into startup disk not the mac os x cd/dvd disk this hardly works on the g3 worth jack when inside the startup disk menu select the mac os x install dvd or cd depends on version
    and select restart.

    The laptop should reboot and start the installer for mac os x tiger if not you will then need to check your system memory.

    tiger requires 256 megs just to run


     
  5. SL7Rips

    SL7Rips Regular member

    Joined:
    Sep 12, 2007
    Messages:
    748
    Likes Received:
    0
    Trophy Points:
    26
    i tryed downloading a firmware update, but i says its not needed

    changed display settings to 640x480

    i insert the install cd and got click on Startup Disc the computer will freeze

    i tried it with the OEM tiger Disc and A Backup. they both freeze
    the oem discs have alot of scraches though,the computer has a 120GB hdd with 385MB ram

    i dont know what the deal is
     
  6. bass_hit

    bass_hit Regular member

    Joined:
    Mar 26, 2007
    Messages:
    336
    Likes Received:
    0
    Trophy Points:
    26
    When you say OEM disc, do you mean like, a retail copy of Tiger or a copy that shipped with another mac? If it's not the retail discs, it won't work.

    It also requires 9.2.2 not just 9.2 for the install to work.

    Once that's up to date, restart holding down the option key for a list of bootable devices or boot holding 'c'. That should do it.

    Good luck!
     
  7. SL7Rips

    SL7Rips Regular member

    Joined:
    Sep 12, 2007
    Messages:
    748
    Likes Received:
    0
    Trophy Points:
    26
    store bought copy.. from the apple store. ill try the update and see if that works
     

Share This Page