Here's the log file, I can't figure this out. I updated the firmware, uninstalled and installed the drive. (NEC ND-6500A) Tried Sony, Ritek and now FujiFilm. All of the media I've tried was 16x media and everyone started burning at 2.4x....pain in the aaaaaa$$. I've even tried burning it at 1x and no dice. Any help would be greatly appreciated =) Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 1:03:20 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 6.6.1.4 Internal Version: 6, 6, 1, 4d Recorder: <_NEC DVD+-RW ND-6500A> Version: 2.24 - HA 1 TA 6 - 6.6.1.4 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 1 TA 1 - 6.6.1.4 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : FUJITSU MHV2080AH atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 1 DMA: Off === CDRom-Device-Map === _NEC DVD+-RW ND-6500A D: CDRom6 Generic DVD-ROM E: CDRom1 Generic DVD-ROM H: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2047MB (2096536kB) Free physical memory: 1531MB (1568696kB) Memory in use : 25 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 21.9.2006 UDF/ISO compilation 10:49:05 AM #1 Phase 112 File dlgbrnst.cpp, Line 1685 DVD-Video files reallocation started 10:49:06 AM #2 Phase 114 File dlgbrnst.cpp, Line 1685 DVD-Video files reallocation completed (no file modified) 10:49:06 AM #3 Text 0 File Isodoc.cpp, Line 6475 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:49:06 AM #4 Phase 111 File dlgbrnst.cpp, Line 1685 DVD-Video files sorted 10:49:06 AM #5 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 10:49:06 AM #6 Text 0 File Reader.cpp, Line 124 Reader running 10:49:06 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:49:06 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:49:06 AM #9 Text 0 File Burncd.cpp, Line 3305 Turn on Disc-At-Once, using DVD media 10:49:06 AM #10 Text 0 File DlgWaitCD.cpp, Line 281 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2217039 (492:40.39, 4330MB) 10:49:06 AM #11 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 10:49:06 AM #12 Text 0 File DlgWaitCD.cpp, Line 2612 Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R Disc Manufacturer: RITEKF - 1 Disc Application Code: 64, Disc Physical Code: 193 10:49:06 AM #13 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:49:07 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2217040 (2217040) = #2217040/492:40.40 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2217040 blocks [_NEC DVD+-RW ND-6500A] -------------------------------------------------------------- 10:49:07 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [_NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4540497920, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2217040 | lead-out | 1 | 0x41 | 0x00 10:49:07 AM #16 Text 0 File SCSIPassThrough.cpp, Line 38 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:49:07 AM #17 Text 0 File SCSIPassThrough.cpp, Line 83 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:49:07 AM #18 Phase 24 File dlgbrnst.cpp, Line 1685 Caching of files started 10:49:07 AM #19 Text 0 File Burncd.cpp, Line 4145 Cache writing successful. 10:49:07 AM #20 Phase 25 File dlgbrnst.cpp, Line 1685 Caching of files completed 10:49:07 AM #21 Phase 36 File dlgbrnst.cpp, Line 1685 Burn process started at 2.4x (3,324 KB/s) 10:49:07 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:49:07 AM #23 Text 0 File DVDR.cpp, Line 2707 Recording mode: Sequential Recording Mode 10:49:07 AM #24 Text 0 File DVDR.cpp, Line 2863 Start write address at LBA 0 DVD high compatibility mode: Yes 10:49:07 AM #25 Text 0 File Cdrdrv.cpp, Line 8647 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:49:07 AM #26 SPTI -1046 File SCSIPassThrough.cpp, Line 289 D: CdRom6: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 00 00 00 00 00 21 D4 50 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 10:49:07 AM #27 CDR -1046 File ThreadedTransferInterface.cpp, Line 1799 Illegal disc D: _NEC DVD+-RW ND-6500A 10:49:07 AM #28 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799 Could not perform start of Disc-at-once 10:49:07 AM #29 Phase 38 File dlgbrnst.cpp, Line 1685 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 12:05:10 PM File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/10/2004 5:00:00 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I am not real good at reading logs. But, I did notice that your DMA is "ON" and this is good. Try updating your Nero to 6.6.0.18 - I have heard that this is a good version, others in the 6 series have been noted as "buggy".
Hello. Yes, version 6.6.1.4 pretty much sucks. Uninstall Nero and then run the Nero 6 Clean Tool, writing down your serial number before doing so. http://ww2.nero.com/nero6/enu/Nero_6_CleanTool.html Version 6.6.0.18 can be downloaded here: Package 1: http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe Package 2: http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe If you want, you can reset your burner and communication channels. Soemtimes that helps as well. Right click on My Computer and select Properties. Click the Hardware tab. Click the Device Manager button. Click the "+" beside DVD/CD-ROM Drives. Right click on the name of your DVD burner and select Uninstall. Click OK. Still in Device Manager: Click the "+" beside IDE ATA/ATAPI Controllers. Right click on the Primary Channel and select Uninstall. Click OK. Right click on the Secondary Channel and select Uninstall. Click OK. Restart the system. I'd also try a different media. My NEC laptop burner dislikes Ritek media. Try some Verbatim, Taiyo Yuden, or Made in Japan labeled Fuji or Sony media. You might even try +R instead of -R media. You might also try burning with ImgBurn, a free program. http://www.imgburn.com Let us know how you make out.
I've tried all of that stuff before except the different Nero version. I had an old version of Nero that worked fine, then randomly started sucking. So I upgraded to the 18 ver and it still blew, although Im encoding a avi right now and it seems like it might work. Ill let you know when its finished. Thanks for the input.
I have the same problem with some "Benq 16x DVD-R with <Picfect>" DVDs. I don`t mind the low speed, what bugs me is the fact that I can`t write the disc at any speed (Illegal Disk). Other DVDs (TDK DVD-R 1-16x) worked fine. Here-s the log from a(or any) Benq disc: AXiXo 6 GXrXa NXtXoXaXa dX XeXiX This-isno-tare-alor-vali-dkey-noob Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 7.0.1.4 Internal Version: 7, 0, 1, 4 Recorder: <_NEC DVD_RW ND-6750A> Version: 2.61 - HA 1 TA 3 - 7.0.1.4 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <VD5167Y ZXK735D >Version: 1.0 - HA 1 TA 1 - 7.0.1.4 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : ST96812AS atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD_RW ND-6750A atapi Port 2 ID 0 DMA: On CdRomPeripheral : VD5167Y ZXK735D 1.0 dtscsi Port 3 ID 0 DMA: Off === CDRom-Device-Map === _NEC DVD_RW ND-6750A D: CDRom3 VD5167Y ZXK735D F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 66060288 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 446MB (456944kB) Free physical memory: 92MB (94216kB) Memory in use : 79 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 22.9.2006 UDF compilation 3:35:22 PM #1 Text 0 File Isodoc.cpp, Line 6411 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : TRUE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : pure UDF Revision : 1.02 UDF Partition Type : physical 3:35:22 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 64512KB of Memory 3:35:22 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 3:35:22 PM #4 Text 0 File Burncd.cpp, Line 3342 Turn on Disc-At-Once, using DVD media 3:35:22 PM #5 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1828351 (406:18.01, 3570MB) 3:35:22 PM #6 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 3:35:22 PM #7 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: _NEC DVD_RW ND-6750A, Media type: DVD-R Disc Manufacturer: DAXON0 - 16S Disc Application Code: 64, Disc Physical Code: 193 3:35:22 PM #8 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:35:22 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1828352 (1828352) = #1828352/406:18.2 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1828352 blocks [D: _NEC DVD_RW ND-6750A] -------------------------------------------------------------- 3:35:22 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: _NEC DVD_RW ND-6750A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3744464896, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1828352 | lead-out | 1 | 0x41 | 0x00 3:35:22 PM #11 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 3:35:22 PM #12 Phase 24 File dlgbrnst.cpp, Line 1725 Caching of files started 3:35:22 PM #13 Text 0 File Burncd.cpp, Line 4176 Cache writing successful. 3:35:22 PM #14 Phase 25 File dlgbrnst.cpp, Line 1725 Caching of files completed 3:35:22 PM #15 Phase 32 File dlgbrnst.cpp, Line 1725 Simulation started at 2.4x (3,324 KB/s) 3:35:23 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 3:35:23 PM #17 Text 0 File DVDR.cpp, Line 2580 Recording mode: Sequential Recording Mode 3:35:23 PM #18 Text 0 File MMC.cpp, Line 21611 Set BUFE: Buffer underrun protection -> ON 3:35:23 PM #19 Text 0 File DVDR.cpp, Line 2735 Start write address at LBA 0 DVD high compatibility mode: Yes 3:35:23 PM #20 Text 0 File Cdrdrv.cpp, Line 8411 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 3:35:23 PM #21 SPTI -1046 File SCSIPassThrough.cpp, Line 323 D: CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 00 00 00 00 00 1B E6 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 3:35:23 PM #22 CDR -1046 File ThreadedTransferInterface.cpp, Line 1799 Illegal disc D: _NEC DVD_RW ND-6750A 3:35:23 PM #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799 Could not perform start of Disc-at-once 3:35:23 PM #24 Phase 34 File dlgbrnst.cpp, Line 1725 Simulation failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/20/2006 12:16:24 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/16/2006 11:23:54 PM (Prassi/Veritas driver for win 2K) File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 2/28/2006 3:00:00 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hi. A few things. The version of Nero you're using is not a very good one. I'd suggest uninstalling your current version and then running the Nero 7 Clean Tool. Next, download and install version 7.0.8.2 which is halfway decent. Be sure to write down your Nero serial number before running the Clean Tool. http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html Nero 7.0.8.2: http://www.filehippo.com/download_nero_7_premium/?845 This is not very good quality media. Use Verbatim, Taiyo Yuden, and Made in Japan labeled Fuji and Somy media. Laptop burners are more finicky about media than desktop burners and are also more fragile and less forgiving in my experience. The above is a Roxio driver that in some cases can conflict with Nero. It is generally a good idea to use either Roxio or Nero software, but not both on the same system. If you're going to run Nero software, uninstall any Roxio software like Easy Media Creator and run the Roxio Zapper. Run the Zapper even if you don't have any Roxio software installed as other programs sometimes install this driver without your knowledge. http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml http://kb.roxio.com/content/kb/EE6000061
I tried Sony and FujiFilm with no luck, just bought some Verbatim +R discs and it burned fine at 8x. So all that trouble for some shitty discs. C'est la vie. Thanks for the help.
