hi! i just bought new dvds, sony's AccuCORE, and succesfully burned a data dvd. today i tried to burn a video dvd, but i got the illegal disc error. i tried with several other recording software, with the same error. after searching trough this page, i updated my firmware (there is still a possibility of an old firmware file, but i did not get a newer one anywhere), but it was already updated as the executable file said anyway, here is the log, do your magic : Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.2.3.2 Internal Version: 7, 2, 3, 2 Recorder: <TEAC DV-W516G> Version: B4S6 - HA 1 TA 1 - 7.2.3.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <TEAC DV-W516G >Version: B4S6 - HA 1 TA 1 - 7.2.3.2 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD600BB-00CAA1 atapi Port 0 ID 0 DMA: On CdRomPeripheral : PHILIPS CDRW2010 atapi Port 1 ID 0 DMA: On CdRomPeripheral : TEAC DV-W516G atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === PHILIPS CDRW2010 F: CDRom0 TEAC DV-W516G G: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte BUFE : 0 Physical memory : 255MB (261616kB) Free physical memory: 23MB (23924kB) Memory in use : 90 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 30.6.2006 UDF/ISO compilation 19:57:40 #1 Phase 112 File dlgbrnst.cpp, Line 1730 DVD-Video files reallocation started 19:57:40 #2 Phase 114 File dlgbrnst.cpp, Line 1730 DVD-Video files reallocation completed (no file modified) 19:57:40 #3 Text 0 File Isodoc.cpp, Line 6427 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 19:57:41 #4 Phase 111 File dlgbrnst.cpp, Line 1730 DVD-Video files sorted 19:57:41 #5 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 39936KB of Memory 19:57:41 #6 Text 0 File Reader.cpp, Line 124 Reader running 19:57:41 #7 Text 0 File Writer.cpp, Line 113 Writer G: TEAC DV-W516G running 19:57:41 #8 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 19:57:41 #9 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 19:57:41 #10 Text 0 File Burncd.cpp, Line 3400 Turn on Disc-At-Once, using DVD media 19:58:15 #11 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2289487 (508:46.37, 4471MB) 19:58:15 #12 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO 19:58:15 #13 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: TEAC DV-W516G, Media type: DVD-R Disc Manufacturer: SONY16 - D1 Disc Application Code: 64, Disc Physical Code: 193 19:58:15 #14 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD R/RW; DVD+R DL.) 19:58:15 #15 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2289488 (2289488) = #2289488/508:46.38 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2289488 blocks [G: TEAC DV-W516G] -------------------------------------------------------------- 19:58:15 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [G: TEAC DV-W516G] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4688871424, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2289488 | lead-out | 1 | 0x41 | 0x00 19:58:15 #17 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 19:58:15 #18 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 19:58:15 #19 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 19:58:15 #20 Text 0 File Burncd.cpp, Line 4231 Cache writing successful. 19:58:15 #21 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 19:58:15 #22 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 4x (5.540 KB/s) 19:58:16 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 19:58:16 #24 Text 0 File DVDR.cpp, Line 2869 Recording mode: Sequential Recording Mode 19:58:16 #25 Text 0 File DVDR.cpp, Line 3025 Start write address at LBA 0 DVD high compatibility mode: Yes 19:58:16 #26 Text 0 File Cdrdrv.cpp, Line 8995 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 19:58:22 #27 SPTI -1046 File SCSIPassThrough.cpp, Line 291 G: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05 Buffer x08f60000: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 19:58:22 #28 CDR -1046 File Writer.cpp, Line 302 Illegal disc G: TEAC DV-W516G 19:58:22 #29 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 19:58:23 #30 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 19:58:23 #31 Text 0 File DVDR.cpp, Line 3265 EndDAO: Last written address was -1 19:58:23 #32 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 4x (5.540 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19.5.2006 23:16:24 File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16.5.2006 22:23:54 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
From what I see Nero cannot recognize the media? What Blank media are you using? pIf its a NEW media its probbaly not supported by new firmware yet, You may want to try another type of media Use the following as a guide. http://www.digitalfaq.com/media/dvdmedia.htm The following list is in preference order. The best discs are near the top of the list. The discs at the bottom of the list are suitable only for a landfill. Almost flawless burns with 95-100% reliable results: PVC = Pioneer = (-R)(-RW) MXLRG01, MXLRG02 = Maxell = (-R) ... be aware of unbranded fakes MCC = Mitsubishi Chemicals = (-R)<-----------------VERBATIM MY CHOICE #1 TDKG02 = TDK Corp = (-R) ... be aware of unbranded fakes TAIYOYUDEN or YUDEN = Taiyo Yuden = (-R)<--------------FUJIFILM (made in japan) MY CHOICE #2 Also your free memory is really low You need to turn off everything you can when burning, And you really need some more memory in your computer. With 90% of your memory in use you will probably gett skipping and or errors on the disc as well after burning.
Hi Hilter Just to add to Jizmak good advice - Your firmware is up to date and what I found on this last version it did not include the media code for 16x Sony -R's. Probably the reason for your illegal disc w/ the different programs. For -R media - look for 8x Verbs, Sony and Taiyo Yuden- these were some of the media codes in the latest version. So these discs may be hit or miss on this drive. I would try and take them back and exchange them if you can.
You have Roxio installed, it clashes with Nero, to remove, run this zapper http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
thank you all. i just removed the roxio drivers, but the error is the same the really weird thing is, that writing data dvd's works great, only video dvd's throw this error. looks like i'll just have to get some other dvd pack.... thank you anyway
So that I could comment on 7.2.3.2b, I tried it to burn 3 AVI flies which I had successfully burned using version 7.0.8.2, sadly each burn was unsatisfactory so I reverted to 7.0.8.2, tried them again with success…my conclusion..7.2.3.2b was a failure when it comes to burn AVI files. I did the following, uninstalled 7.2.3.2b, ran this clean tool http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html and then installed 7.0.8.2 from here http://www.filehippo.com/download_nero_7_premium/?845
i just tried it, but same error first i removed the new version, used the cleaning tool, and put the version you posted. but it's all the same. could a reason be, that i installed only part of the nero ( without nero cover designer and other useless stuff - they are useless for me ). but i doubt it
here it is Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2.11.2004 12:54:32 NT-SPTI used Nero Version: 7.0.8.2 Internal Version: 7, 0, 8, 2 Recorder: <TEAC DV-W516G> Version: B4S6 - HA 1 TA 1 - 7.0.8.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <PHILIPS CDRW2010 >Version: 1.30 - HA 1 TA 0 - 7.0.8.2 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD600BB-00CAA1 atapi Port 0 ID 0 DMA: On CdRomPeripheral : PHILIPS CDRW2010 atapi Port 1 ID 0 DMA: On CdRomPeripheral : TEAC DV-W516G atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === PHILIPS CDRW2010 F: CDRom0 TEAC DV-W516G G: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte BUFE : 0 Physical memory : 255MB (261616kB) Free physical memory: 94MB (96836kB) Memory in use : 62 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 1.7.2006 UDF/ISO compilation 15:00:09 #1 Phase 112 File dlgbrnst.cpp, Line 1730 DVD-Video files reallocation started 15:00:09 #2 Phase 114 File dlgbrnst.cpp, Line 1730 DVD-Video files reallocation completed (no file modified) 15:00:09 #3 Text 0 File Isodoc.cpp, Line 6423 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 15:00:09 #4 Phase 111 File dlgbrnst.cpp, Line 1730 DVD-Video files sorted 15:00:09 #5 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 39936KB of Memory 15:00:09 #6 Text 0 File Reader.cpp, Line 124 Reader running 15:00:09 #7 Text 0 File Writer.cpp, Line 113 Writer G: TEAC DV-W516G running 15:00:09 #8 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 15:00:09 #9 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 15:00:09 #10 Text 0 File Burncd.cpp, Line 3353 Turn on Disc-At-Once, using DVD media 15:00:10 #11 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2289487 (508:46.37, 4471MB) 15:00:10 #12 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 15:00:10 #13 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: TEAC DV-W516G, Media type: DVD-R Disc Manufacturer: SONY16 - D1 Disc Application Code: 64, Disc Physical Code: 193 15:00:10 #14 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 15:00:10 #15 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2289488 (2289488) = #2289488/508:46.38 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2289488 blocks [G: TEAC DV-W516G] -------------------------------------------------------------- 15:00:10 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [G: TEAC DV-W516G] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4688871424, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2289488 | lead-out | 1 | 0x41 | 0x00 15:00:10 #17 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 15:00:10 #18 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 15:00:10 #19 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 15:00:10 #20 Text 0 File Burncd.cpp, Line 4187 Cache writing successful. 15:00:10 #21 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 15:00:10 #22 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 4x (5.540 KB/s) 15:00:10 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 15:00:10 #24 Text 0 File DVDR.cpp, Line 2760 Recording mode: Sequential Recording Mode 15:00:10 #25 Text 0 File DVDR.cpp, Line 2916 Start write address at LBA 0 DVD high compatibility mode: Yes 15:00:10 #26 Text 0 File Cdrdrv.cpp, Line 8661 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 15:00:11 #27 SPTI -1046 File SCSIPassThrough.cpp, Line 290 G: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05 Buffer x081a0000: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 15:00:11 #28 CDR -1046 File Writer.cpp, Line 302 Illegal disc G: TEAC DV-W516G 15:00:11 #29 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 15:00:12 #30 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 15:00:12 #31 Text 0 File DVDR.cpp, Line 3156 EndDAO: Last written address was -1 15:00:12 #32 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 4x (5.540 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16.5.2006 22:23:54 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
You really don't have enough RAM to do DVD burning projects. Although that's not likely your issue, you should upgrade to at least 512MB and definitely don't have any background programs running while burning. Another thing: [/bold] You are burning too close to the outside edge of your media. Select a custom output size and use 4350MB.
I'm having the most terrible time trying to burn a data dvd.... I've never had this problem in the past. I've always used the same brand of dvds which are Sony DVD-R accucoure.... however I haven't had a need to burn a data dvd in the past couple of months but when I went to make one today I kept getting this illegal disc error message right after the cache process had completed.... here's my log:----------------------------------------------------------------- Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 6.6.1.4 Internal Version: 6, 6, 1, 4d (Nero Express) Recorder: <_NEC DVD_RW ND-2510A> Version: 2.04 - HA 1 TA 0 - 6.6.1.4 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <LITE-ON CD-ROM LTN-487T >Version: 6TS4 - HA 1 TA 1 - 6.6.1.4 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 1 ID 0 DMA: On CdRomPeripheral : LITE-ON CD-ROM LTN-487T atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === _NEC DVD_RW ND-2510A D: CDRom0 LITE-ON CD-ROM LTN-487T E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 66060288 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 447MB (458220kB) Free physical memory: 102MB (104516kB) Memory in use : 77 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 1.7.2006 ISO compilation 2:58:20 PM #1 Text 0 File Isodoc.cpp, Line 6475 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 2:58:21 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 64512KB of Memory 2:58:21 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 2:58:21 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 2:58:21 PM #5 Text 0 File Burncd.cpp, Line 3305 Turn on Disc-At-Once, using DVD media 2:58:21 PM #6 Text 0 File DlgWaitCD.cpp, Line 281 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1060895 (235:45.20, 2072MB) 2:58:21 PM #7 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 2:58:21 PM #8 Text 0 File DlgWaitCD.cpp, Line 2612 Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R Disc Manufacturer: SONY16 - D1 Disc Application Code: 64, Disc Physical Code: 193 2:58:21 PM #9 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:58:21 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1060896 (1060896) = #1060896/235:45.21 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1060896 blocks [_NEC DVD_RW ND-2510A] -------------------------------------------------------------- 2:58:21 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2172715008, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1060896 | lead-out | 1 | 0x41 | 0x00 2:58:21 PM #12 Text 0 File SCSIPassThrough.cpp, Line 38 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 2:58:21 PM #13 Text 0 File SCSIPassThrough.cpp, Line 83 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 2:58:21 PM #14 Phase 24 File dlgbrnst.cpp, Line 1685 Caching of files started 2:58:33 PM #15 Text 0 File Burncd.cpp, Line 4145 Cache writing successful. 2:58:33 PM #16 Phase 25 File dlgbrnst.cpp, Line 1685 Caching of files completed 2:58:33 PM #17 Phase 36 File dlgbrnst.cpp, Line 1685 Burn process started at 2x (2,770 KB/s) 2:58:33 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:58:33 PM #19 Text 0 File DVDR.cpp, Line 2707 Recording mode: Sequential Recording Mode 2:58:33 PM #20 Text 0 File DVDR.cpp, Line 2863 Start write address at LBA 0 DVD high compatibility mode: Yes 2:58:33 PM #21 Text 0 File Cdrdrv.cpp, Line 8647 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 2:58:33 PM #22 SPTI -1046 File SCSIPassThrough.cpp, Line 289 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 00 00 00 00 00 10 30 20 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 2:58:33 PM #23 CDR -1046 File ThreadedTransferInterface.cpp, Line 1799 Illegal disc D: _NEC DVD_RW ND-2510A 2:58:33 PM #24 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799 Could not perform start of Disc-at-once 2:58:33 PM #25 Phase 38 File dlgbrnst.cpp, Line 1685 Burn process failed at 2x (2,770 KB/s) Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
@Nels6354, You are lucky that this yhread is being answered, you have hijacked this thread which is against forum rules, read them and next time start one of your own, having said that heres your results. This version of Nero is known to be "buggy", uninstall, run this clean tool, http://ww2.nero.com/nero6/en/Clean_Tools.html and then install this version, BOTH packages http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe Package 2 http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe Update firmware to 2.18 from here http://support.necsam.com/oem/downloads/flashfirmware/dl/K251GN81.exe
