Illegal Disc Error using Nero

I'm having an issue with my sony DRU720a burning dvd's. I've had the drive for about a month now and have made probably somewhere around 35 or 40 dvd copies. Yesterday i was burning and the electricity went off while i was in the middle of the burn. And since i havn't been able to burn anything using Nero. I have the latest firmware on the dvd drive, latest nero, reinstalled windows and nero after this happened. been using the same media but am getting the below error log. I also went to sony's website and got a drive check program and it seems to have an error with that program where it won't finish burning. Here is the nero log

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.15
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 15h

Recorder: <SONY DVD RW DRU-720A> Version: JY03 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400BB-75CLB0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-720A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX230ED atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
SONY DVD RW DRU-720A E: CDRom0
SONY CD-RW CRX230ED F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261132kB)
Free physical memory: 77MB (79148kB)
Memory in use : 69 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

31.7.2005
NeroAPI
11:19:19 AM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

11:19:19 AM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

11:19:20 AM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

11:19:20 AM #4 Text 0 File Reader.cpp, Line 127
Reader running

11:19:20 AM #5 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-720A running

11:19:20 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

11:19:20 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

11:19:20 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

11:19:20 AM #9 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media

11:19:44 AM #10 Text 0 File DlgWaitCD.cpp, Line 269
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2287855 (508:24.55, 4468MB)

11:19:44 AM #11 Text 0 File DlgWaitCD.cpp, Line 281
Write in overburning mode: NO

11:19:44 AM #12 Text 0 File DlgWaitCD.cpp, Line 2477
Recorder: SONY DVD RW DRU-720A, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193

11:19:44 AM #13 Text 0 File DlgWaitCD.cpp, Line 447
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)

11:19:44 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2287856 (2287856) = #2287856/508:24.56
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2287856 blocks [SONY DVD RW DRU-720A]
--------------------------------------------------------------

11:19:44 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [SONY DVD RW DRU-720A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4685529088, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2287856 | lead-out | 1 | 0x41 | 0x00

11:19:44 AM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

11:19:44 AM #17 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.

11:19:44 AM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

11:19:44 AM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 16x (22,160 KB/s)

11:19:44 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:19:45 AM #21 Text 0 File DVDR.cpp, Line 2357
Recording mode: Sequential Recording Mode

11:19:45 AM #22 Text 0 File Mmc.cpp, Line 21663
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON

11:19:45 AM #23 Text 0 File DVDR.cpp, Line 2511
Start write address at LBA 0
DVD high compatibility mode: Yes

11:19:45 AM #24 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:20:24 AM #25 Text 0 File Cdrdrv.cpp, Line 1288
11:20:24.953 - SONY DVD RW DRU-720A\H1 T0 : Queue again later

11:22:31 AM #26 SCSI -1046 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x00B70000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x35 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

11:22:31 AM #27 CDR -1046 File Writer.cpp, Line 311
Illegal disc

11:22:31 AM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:22:31 AM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

11:22:31 AM #30 Text 0 File DVDR.cpp, Line 2749
EndDAO: Last written address was 13759

11:22:31 AM #31 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 16x (22,160 KB/s)

11:22:31 AM #32 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

11:22:31 AM #33 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 7/31/2005 1:43:25 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


and here is the section of the sony drive check that failed

+++++++++++++++++++++++++++++++++++ edwGetErrorInfo() started at Sun Jul 31 12:23:33 2005
----------------------------------- edwGetErrorInfo() ended at Sun Jul 31 12:23:33 2005
Status : Error
Problem : 04 - Internal
Action : 04 - Abort w/ Shutdown
Description: SCSI Sense - Key:2 (Not Ready) ASC:30 ASCQ:05
+++++++++++++++++++++++++++++++++++ edwCommandLoadingMech() started at Sun Jul 31 12:23:33 2005
Door: Close

-------------------- EdiExecSelect()
Unit#1 E: [SONY _DVD RW DRU-720A ] (JY03) - CD-RW Drive (ASPI)
-- 00000ms -- Success

++++++++++++++++++++ EdiMediaCommandLoadingMech()

-------------------- EdiExecDoorLock()
Prevent Medium Removal: Unlock
Command: Prevent/Allow Medim Removal 1E 00 00 00 00 00
SENSE:0 ASC:00 ASCQ:00
-- 00000ms -- Success

-------------------- EdiExecTray()
Tray: Open
Command: Start/Stop Unit 1B 00 00 00 02 00
SENSE:0 ASC:00 ASCQ:00
-- 02640ms -- Success

-------------------- EdiExecUnselect()
-- 00000ms -- Success
----------------------------------- edwCommandLoadingMech() ended at Sun Jul 31 12:23:36 2005
Status: Success
+++++++++++++++++++++++++++++++++++ edwDeinit() started at Sun Jul 31 12:23:51 2005

++++++++++++++++++++ EdiDeinitUnitList()
#Units = 2

++++++++++++++++++++ AspiMgrDeinit()

++++++++++++++++++++ sptiCloseHandle()
sptiCloseHandle(98)
sptiCloseHandle(9C)

++++++++++++++++++++ EdiUpdateInitInfo()

Copyright (C) 1998-2003, ECI. All Rights Reserved.

ediEngine Version: 2.83.0.0
Operating System : Microsoft Windows XP (5.1.2600) Professional
Program Type : Win32
Compiler : Visual C/C++ 6.0
Run Time : Sun Jul 31 12:23:51 2005


Any help would be appreciated, i'm baffled.

Reply Start a new thread Unsubscribe from this thread










AfterDawn.com | AfterDawn.com Forums | Filepedia.com | MP3Lizard.com | DVD X Copy Forums | Blasteroids.com | Advertise on our sites

© 1999-2005 AfterDawn.com. Rules, restrictions and privacy policy.
3262 users online.

 

We have a separate section for Nero. I would edit out this post & put it in the correct section of the forum.

I do wish people would read & think before posting!

Pulsar

BTW the log says illegal disc & that you are burning @ 16x. What media are you using? & slow the burning down to 4x max.

 

this isn't involving just nero. My burner won't burn using any dvd burner problem. Hopefully someone can help me out on this. It burns fine for cd's.

 

You never said that in your original post! Again, have you tried slowing the speed down to 4x & what media are you using. If you answer the questions I, or another, may be able to help you!

Pulsar

PS, have you access to another burner to try?

 

I brought it back down to 8x from 16x. And it's still having the error.
I used the drive check that sony provides on there website and it won't get past 22% before getting the write error.

 

the media i'm using is verbatim and also memorex. never had problems with either media before yesterday.

 

Again, slow it down to 4x, memorex media is the most inconsistent media out there, 99.9% of people here do not use them. Verbatim Datalifes are good, from what I read.