Hi, sorry, but i tried to look and i found the burner same type as mine, but i do not know how to read if the firmware or if anything else is wrong.. here is the Log; i use a LITE-ON DVDRW SOHW-1633S, and Nero 6.6.0.8.. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 7:35:34 PM Nero Version: 6.6.0.8 (Nero Express) Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0A - HA 1 TA 0 - 6.6.0.8 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 1 - 6.6.0.8 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD1200JB-00CRA1 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 1 DMA: On DiskPeripheral : WDC WD2000JD-55HBC0 08.0 viamraid Port 2 ID 0 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 1 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW SOHW-1633S H: CDRom0 HL-DT-ST DVD-ROM GDR8162 I: CDRom1 Generic DVD-ROM J: CDRom2 Generic DVD-ROM K: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1022MB (1046960kB) Free physical memory: 360MB (368980kB) Memory in use : 64 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 18.11.2006 DVD-Copy on the fly 12:52:04 AM #1 Text 0 File Reader.cpp, Line 127 Reader running 12:52:04 AM #2 Text 0 File Writer.cpp, Line 122 Writer LITE-ON DVDRW SOHW-1633S running 12:52:04 AM #3 Text 0 File DVDCopy.cpp, Line 279 DVD Track-Information from source disc S01 T01 Con 0x04 Start 0 Len 1971392 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 12:52:04 AM #4 Text 0 File DVDCopy.cpp, Line 382 Max -1 tracks of 1 allowed to copy 1: 0 - 1971392 = 1971392, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 12:52:04 AM #5 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using DVD media 12:52:04 AM #6 Text 0 File DlgWaitCD.cpp, Line 259 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1971391 (438:05.16, 3850MB) 12:52:04 AM #7 Text 0 File DlgWaitCD.cpp, Line 271 Write in overburning mode: NO (enabled: CD) 12:52:04 AM #8 Text 0 File DlgWaitCD.cpp, Line 2316 Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R Disc Manufacturer: RITEKF - 1 Disc Application Code: 64, Disc Physical Code: 193 12:52:04 AM #9 Text 0 File DlgWaitCD.cpp, Line 433 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:52:04 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 1971392 (1971392) = #1971392/438:5.17 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1971392 blocks [LITE-ON DVDRW SOHW-1633S] -------------------------------------------------------------- 12:52:04 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4037410816, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1971392 | lead-out | 1 | 0x41 | 0x00 12:52:04 AM #12 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 12:52:04 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 12:52:04 AM #14 Text 0 File DVDR.cpp, Line 2194 Recording mode: Sequential Recording Mode 12:52:04 AM #15 Text 0 File Mmc.cpp, Line 21235 Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON 12:52:04 AM #16 Text 0 File DVDR.cpp, Line 2340 Start write address at LBA 0 DVD high compatibility mode: Yes 12:52:04 AM #17 Text 0 File Cdrdrv.cpp, Line 8430 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 12:52:33 AM #18 SCSI -1046 File Cdrdrv.cpp, Line 1435 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04F80000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 12:52:33 AM #19 CDR -1046 File Writer.cpp, Line 311 Illegal disc 12:52:33 AM #20 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:52:33 AM #21 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 12:52:34 AM #22 Text 0 File DVDR.cpp, Line 2603 EndDAO: Last written address was -1 12:52:34 AM #23 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 5:02:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 8/3/2004 8:07:00 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) please tell me what to do
Hi Shaolyn Yes you can definitely use a firmware update - the latest is BSOY: http://forum.rpc1.org/dl_firmware.php?download_id=1934 May help with those 16x discs made by Ritek. That's one thing a firmware update does - teaches the new read/write strategies on newer media. Nero Version: 6.6.0.8 Nero can use an update to - update to 6.6.0.18. Here are some links. Package 1 http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe Package 2 (recode & vision) http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe Give that a go and let us know.
im not too sure how to use the Firmware Page.. lol.. my burner is BS0A, but there is no link to BS0A, do any of those work? or do i just press LtnRPC.. also, i found a site that may have the BS0A.. is this site legit?: http://codeguys.rpc1.org/firmwares.html
Heres the direct link to your LATEST firmware BSOY http://www.liteonit.com/DOWNLOADS/ODD/SOHW-1633S/firmware/DR16BS0Y.zip
Ohh okay, i thought Bs0A was the one i gotta look for, i didnt know it was just the original version.. i got it updated, and it works! thanks everyone
