Well I cant seem to get anything to work right. Heres the story- Long time ago (year, maybe a little more) used this drive to back up my dvds. Never had a problem with it. The drive is probably 2 and a half years old now but isnt used very often. About a year ago i started using it to back up dvds. Worked fine. I had Fujifilm dvds -R, which are horrible im aware, but they worked. Spindle ran out so i went to best buy and bought some more fujifilm. They didnt work. I kept getting illegal disc, etc etc. Tried Dvdshrink/nero as well as imgburn- neither worked. So i started using memorex DVD+Rs which i had available. They gave me an illegal disc error on nero and worked on img burn, so i continued. Problem was they didnt like dvd players so i had to switch. I bought some verbatim -Rs because everyone on every "help i cant burn dvds" forum ive been on raves about them. So I thought id try. I pop one in and I get "illegal disc" with nero and "unsupported media" with imgburn. So I thought id post the nero log first. If anyone can take a look at this and give me any hints that would be great. Theres no firmware for my burner so thats not it, and it did work with the memorexs so Its not totally fried. I really am out of ideas here- Thanks guys. -Ryan Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM Nero API version: 6.3.1.20 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: <Memorex DVD+/-DLRWL1 F16>Version: BWSE - HA 1 TA 1 - 6.3.1.20 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder === Scsi-Device-Map === DiskPeripheral : IC35L060AVER07-0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6B200R0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : PLEXTOR CD-R PX-W5224A atapi Port 1 ID 0 DMA: On CdRomPeripheral : Memorex DVD+/-DLRWL1 F16 atapi Port 1 ID 1 DMA: On CdRomPeripheral : OR5013K ANX820R 1.0 dtscsi Port 2 ID 0 DMA: Off CdRomPeripheral : OR5013K ANX820R 1.0 dtscsi Port 2 ID 1 DMA: Off === CDRom-Device-Map === PLEXTOR CD-R PX-W5224A F: CDRom0 Memorex DVD+/-DLRWL1 F16 G: CDRom1 OR5013K ANX820R I: CDRom2 OR5013K ANX820R K: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1048096kB) Free physical memory: 514MB (526800kB) Memory in use : 49 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 2.7.2006 NeroAPI 11:30:00 PM #1 Phase 112 File APIProgress.cpp, Line 273 DVD-Video files reallocation started 11:30:00 PM #2 Phase 114 File APIProgress.cpp, Line 273 DVD-Video files reallocation completed (no file modified) 11:30:00 PM #3 Phase 111 File APIProgress.cpp, Line 273 DVD-Video files sorted 11:30:00 PM #4 Text 0 File Reader.cpp, Line 126 Reader running 11:30:00 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 11:30:00 PM #6 Text 0 File Writer.cpp, Line 124 Writer Memorex DVD+/-DLRWL1 F16 running 11:30:00 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 11:30:00 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 11:30:01 PM #9 Text 0 File Burncd.cpp, Line 3173 Turn on Disc-At-Once, using DVD media 11:30:01 PM #10 Text 0 File DlgWaitCD.cpp, Line 247 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286127 (508:01.52, 4465MB) 11:30:01 PM #11 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO 11:30:01 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162 Recorder: Memorex DVD+/-DLRWL1 F16, Media type: DVD-R Disc Manufacturer: MCC 03 - RG20 Disc Application Code: 64, Disc Physical Code: 193 11:30:01 PM #13 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:30:01 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [Memorex DVD+/-DLRWL1 F16] -------------------------------------------------------------- 11:30:01 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [Memorex DVD+/-DLRWL1 F16] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2286128 | lead-out | 1 | 0x00 | 0x41 11:30:01 PM #16 Phase 24 File APIProgress.cpp, Line 273 Caching of files started 11:30:01 PM #17 Text 0 File Burncd.cpp, Line 4183 Cache writing successful. 11:30:01 PM #18 Phase 25 File APIProgress.cpp, Line 273 Caching of files completed 11:30:01 PM #19 Phase 36 File APIProgress.cpp, Line 273 Burn process started at 4x (5,540 KB/s) 11:30:01 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:30:01 PM #21 Text 0 File DVDR.cpp, Line 1942 Recording mode: Sequential Recording Mode 11:30:01 PM #22 Text 0 File Mmc.cpp, Line 20513 Set BUFE: supported -> ON , Generic write control : ON 11:30:01 PM #23 Text 0 File DVDR.cpp, Line 2083 Start write address at LBA 0 DVD high compatibility mode: Yes 11:30:01 PM #24 Text 0 File Cdrdrv.cpp, Line 8128 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 11:30:03 PM #25 SCSI -1046 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x00CD0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 11:30:03 PM #26 CDR -1046 File Writer.cpp, Line 304 Illegal disc 11:30:03 PM #27 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 11:30:03 PM #28 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 11:30:03 PM #29 Text 0 File DVDR.cpp, Line 2325 EndDAO: Last written address was -1 11:30:04 PM #30 Phase 38 File APIProgress.cpp, Line 273 Burn process failed at 4x (5,540 KB/s) 11:30:04 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 828 DRM: DRM burn session terminated. 11:30:04 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 857 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\InCDfs.SYS': Ver=4, 2, 16, 0, size=92672 bytes, created 7/16/2004 2:53:14 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 2, 16, 0, size=28672 bytes, created 7/16/2004 2:53:54 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 2, 16, 0, size=7680 bytes, created 7/16/2004 2:57:12 PM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Not sure which version of Nero you are running, believe it to be 6.3 something, upgrade to this version, 6.6.0.18 here, http://www.filehippo.com/download_nero_burning_rom/?539 they say it is the best of the version 6 series. Your firmware is uptodate, my first thought, but you are okay, InCD doesn't play well with Nero Burning, you may want to reinstall Nero and leave out InCD. DMA is not enabled in these two drives, You have plenty of memory available. Disk seems to be recognized, All I can find is the InCD issue, unless one of the more educated senior members can find something else, (Hint Binkie or Gwen..) I hope that this helps.
@blivetNC - lol - you are too kind Good work btw!! @mog108 In addition to blivetNC good advice. Your drive's max speed on -R is 8x and your using 16x media. That may be part of the problem. I couldn't find the firmware's media codes right off. But I'm thinking you drive would do better w/ 16x if it was +R. For -r 8x rated media may be better for your drive. The 2 drives w/ dma off you should be ok on - they look like virtual drives. I would also update Nero to this version 6.6.0.18. Here's some links: Package 1 http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe Package 2 (recode & vision) http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe
Well I uninstalled InCD.. i didnt do a full uninstall, i dont THINK it should matter but if someone things InCD will leave residue after a removal, let me know and ill completely uninstall and reinstall nero (i really dont want to have to though.. haha) I also upgraded to the new version you both gave and got the same error. Im posting the updated log now and then I will try to change the write speed. If that works, Ill repost. But Im assuming it wont, so if theres nothing more on this thread- it didnt work. haha Thanks for your help so far, dont give up on me! =) -Ryan New Log: [Updated Nero, Removed InCD] Ryan Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <Memorex DVD+/-DLRWL1 F16>Version: BWSE - HA 1 TA 1 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <OR5013K ANX820R >Version: 1.0 - HA 2 TA 0 - 6.6.0.18 Adapter driver: <dtscsi> HA 2 === Scsi-Device-Map === DiskPeripheral : IC35L060AVER07-0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6B200R0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : PLEXTOR CD-R PX-W5224A atapi Port 1 ID 0 DMA: On CdRomPeripheral : Memorex DVD+/-DLRWL1 F16 atapi Port 1 ID 1 DMA: On CdRomPeripheral : OR5013K ANX820R 1.0 dtscsi Port 2 ID 0 DMA: Off CdRomPeripheral : OR5013K ANX820R 1.0 dtscsi Port 2 ID 1 DMA: Off === CDRom-Device-Map === PLEXTOR CD-R PX-W5224A F: CDRom0 Memorex DVD+/-DLRWL1 F16 G: CDRom1 OR5013K ANX820R I: CDRom2 OR5013K ANX820R K: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1048096kB) Free physical memory: 495MB (507644kB) Memory in use : 51 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 3.7.2006 Burn DVD Image 12:51:33 AM #1 Text 0 File Reader.cpp, Line 127 Reader running 12:51:33 AM #2 Text 0 File Writer.cpp, Line 122 Writer Memorex DVD+/-DLRWL1 F16 running 12:51:33 AM #3 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 12:51:34 AM #4 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286036 (508:00.36, 4464MB) 12:51:34 AM #5 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 12:51:34 AM #6 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: Memorex DVD+/-DLRWL1 F16, Media type: DVD-R Disc Manufacturer: MCC 03 - RG20 Disc Application Code: 64, Disc Physical Code: 193 12:51:34 AM #7 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:51:34 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2286037 (2286037) = #2286037/508:0.37 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286037 blocks [Memorex DVD+/-DLRWL1 F16] -------------------------------------------------------------- 12:51:34 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [Memorex DVD+/-DLRWL1 F16] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681803776, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286037 | lead-out | 1 | 0x41 | 0x00 12:51:34 AM #10 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 12:51:34 AM #11 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 12:51:34 AM #12 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 12:51:34 AM #13 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 12:51:34 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 12:51:34 AM #15 Text 0 File DVDR.cpp, Line 2571 Recording mode: Sequential Recording Mode 12:51:34 AM #16 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON 12:51:34 AM #17 Text 0 File DVDR.cpp, Line 2726 Start write address at LBA 0 DVD high compatibility mode: Yes 12:51:34 AM #18 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 12:51:38 AM #19 SCSI -1046 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x07C90000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 12:51:38 AM #20 CDR -1046 File Writer.cpp, Line 311 Illegal disc 12:51:38 AM #21 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:51:38 AM #22 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 12:51:38 AM #23 Text 0 File DVDR.cpp, Line 2969 EndDAO: Last written address was -1 12:51:38 AM #24 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec) File 'Drivers\dtscsi.sys': Ver=?.?.?.?, size=223128 bytes, created 11/28/2005 5:34:04 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hey ryan Forgot to add to edit your serial out of the post - begins w/ 1A (it's in both logs) You can run the clean tool for InCD too - here's a link: http://ww2.nero.com/nero6/us/InCD_CleanTool.html Your memorex drive is actually an oem LiteOn 1633S. You could try flashing to that firmware to see if it helps w/ the 16x -R Verbs. But I'm not the best in crossflashing - it may just be a simple flash as usual. Here's a link - the latest is BSOY: http://forum.rpc1.org/dl_firmware.php?download_id=1934 Otherwsie look for the same brand or made in Japan Fuji. Sony or mexell 8x media.
ran the clean incd tool- didnt work Attempted to update firmware but the link doesnt work. haha ok well it works, but the download at the link doesnt.
mog108 Your memorex drive firmware is up to date. http://forum.rpc1.org/dl_firmware.php?download_id=1925 BWSE is the latest, and that is what you have. Your version of Nero is the one i would use if i were staying with 6x. Thats the 6.6.0.18 that binkie7 said to update. So, lets break it down. Your Nero is correct, Your Firmware is up to date, The only thing left is media or a drive error. Nero didnt report a drive error other than "not ready". I would suggest trying different media, trying to stick with Verbatims or Taiyo Yuden as the manufacturer. Now if you got fujis that were made in taiwan, you didnt get Tys. Also try different formats like + or - R. The last log says you removed IN CD, and as you said, you updated, Nero, that only leaves Media, or as a very distant second, the drive. Illegal disc errors usually are out of date firmware, or media as the main culprets. Media is cheap to try if you stick with small number of test dvds, on your purchase. Nothing else seemed to stand out on that last log. Keep posting them as they fail, and maybe we will pin it down. I still suspect Media.. I know, you have heard it before, but dont dismiss it completly just yet. Usually Verbs do the trick, but not for every system out there. Those name brands binkie7 recommended should be Made in Japan on the spindle packaging to get Taiyo Yuden as the manufacture (just like binkie7 said). We should be able to get you going with 6x Nero, but it might take updating to Nero 7, if you try more media and they all come back "illegal disc". But save that as a last resort. Sorry, thats all i can think of right now. Your in good hands with the ones who have been helping you. Im not as concerned about not visiting the forum as much, because the nero crew is great.
Ok i was having the same problem and it was that i was trying to use 16x discs when my max burn speed was 8x. It was kinda weird since the discs were supposed to be 1-16x but w/e. try getting some 8x discs, thats what worked for me.
@Xevlys That's where firmware comes into play - your drive needs the media code to fully recognize and have the correct write strategy for the media you are using. Sometimes even having the latest one may not have the media code for the brand you're using. Thanks for posting what worked for you!! @mog108 Well no loss on the crossflash to the LiteOn. I can give you another link but there is no guarantee this will work either. Plus crossflashing can be a little riskier. Best bet if using -R pick up 8x like Xevlys said worked for them & I adv. above. Use the brands we have posted. Were you previous discs that worked rated 8x? Keep us posted on your outcome!! Good,bad or otherwise. @maxburn I think you need to come and help more!!! We miss that great sense of humor
Well So far this is my media selection Fujifilm 8x -R : Worked Sony 8x +R : Worked (Skips on DVD player) Memorex 8x +R : Worked (Skips on DVD player) Fujifilm 16x -R : Did Not Work Verbatim 16x -R : Did Not Work So judging from what Im hearing and actually paying attention to the maximum write speed of the DVD... it looks like my 16x LiteOn doesnt like 16x media. Interesting. That may just be the problem. When I get around to it I'll get out and get another pack of 8xs and see how that works out. I was under the impression, at least from personal experience, that +R media doesnt like stand alone dvd players as well as -R media. Is that valid or am I just running a string of bad luck? If thats not the case, what is the primary difference between those two?
@mog108 Your drives max speed on -R media is 8x so I'm thinking they haven't updated the media codes for it on -r 16x. (last update was 6/2005) +R media can be booktyped to make it almost universally compatible. Your drive supports 16x with +R. Since it's a oem LiteOn you should be able to use LiteOn booktype utility. http://us.liteonit.com/us/index.php?option=com_wrapper&Itemid=152 Or before you burn put a blank in the drive & go to Nero ToolKit>CD/DVD speed>extra>bitsetting and change to DVD Rom there. You will probably have to do this each time (same w/ the utility). Nero doesn't seem to like the automatic setting for LiteOn manufactured drives. Players can also be picky - so try a lower speed w/ the +R. I would also check those +R that skipped in the dvd player in the pc and see if there are any problems there. Keep us posted!
well I bought some sony dvd -R 8xs and popped one in, used nero to burn my disc image and rather than give me fits it just started burning- currently 5% done. So I think 16x DVDs are my problem, thanks to everyone for the help- Ive been trying to figure this thing out for much too long- haha Hopefully it comes out and plays just fine- if not- hey i guess we'll continue this discussion... haha but I think itll work alright- thanks again guys (and girls)
Ah your burn is finally going past the 4 seconds it was before! Good news! Let us know either way how it turns out. And your're welcome - glad we could help!
wooo i helped someone... lol well i guess i helped someone help someone >_> but i guess its a start maybe ill actually be useful on this forum instead of just coming here for help >_< lol
