i dont know what is up..... here is the error log Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 18/06/2003 12:25:03 AM Nero version: 6.0.0.6 (Nero Express) Recorder: <_NEC DVD_RW ND-1300A> Version: 1.07 - HA 1 TA 0 - 6.0.0.6 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <LITE-ON COMBO LTC-48161H>Version: KH0R - HA 0 TA 1 - 6.0.0.6 Adapter driver: <atapi> HA 0 === Scsi-Device-Map === DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON COMBO LTC-48161H atapi Port 0 ID 1 DMA: On CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 0 DMA: On ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 244MB (250832kB) Memory in use : 52 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 6.3.2006 UDF/ISO compilation 6:24:54 PM #1 Phase 112 File dlgbrnst.cpp, Line 1852 DVD-Video files reallocation started 6:24:55 PM #2 Text 0 File DVDVideoCompilation.cpp, Line 540 Content of VIDEO_TS.IFO has been modified 6:24:55 PM #3 Text 0 File DVDVideoCompilation.cpp, Line 540 Content of VIDEO_TS.BUP has been modified 6:24:55 PM #4 Text 0 File DVDVideoCompilation.cpp, Line 540 Content of VTS_01_0.IFO has been modified 6:24:55 PM #5 Text 0 File DVDVideoCompilation.cpp, Line 540 Content of VTS_01_0.BUP has been modified 6:24:55 PM #6 Phase 113 File dlgbrnst.cpp, Line 1852 DVD-Video files reallocation completed 6:24:55 PM #7 Text 0 File Isodoc.cpp, Line 5506 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 6:24:55 PM #8 Phase 111 File dlgbrnst.cpp, Line 1852 DVD-Video files sorted 6:24:55 PM #9 Text 0 File Reader.cpp, Line 118 Reader running 6:24:55 PM #10 ISO9660GEN -11 File geniso.cpp, Line 3821 First writeable address = 0 (0x00000000) 6:24:55 PM #11 ISO9660GEN -11 File geniso.cpp, Line 3821 First writeable address = 0 (0x00000000) 6:24:55 PM #12 Text 0 File Burncd.cpp, Line 3088 Turn on Disc-at-once, using DVD media 6:25:35 PM #13 Text 0 File DlgWaitCD.cpp, Line 228 Last possible write address on media: 2298495 (510:46.45) Last address to be written: 2052007 (456:00.07) 6:25:35 PM #14 Text 0 File DlgWaitCD.cpp, Line 233 Write in overburning mode: FALSE 6:25:35 PM #15 Text 0 File DlgWaitCD.cpp, Line 1710 Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R Disc Manufacturer: TTH02 - Disc Application Code: 64, Disc Physical Code: 193 6:25:35 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 757 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 2052008 (2052008) = #2052008/456:0.8 relocatable, CD pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2052008 blocks [_NEC DVD_RW ND-1300A ] -------------------------------------------------------------- 6:25:35 PM #17 Text 0 File Burncd.cpp, Line 3323 Recorder and media-info: Burning to _NEC DVD_RW ND-1300A on a DVD-R media 6:25:35 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 910 Prepare recorder _NEC DVD_RW ND-1300A for write in cue-sheet-DAO DAO infos: ========== MCN: TOCTYPE: 0x0 Session Closed, CD fixated Tracks 1 to 1: TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 -92147712 6:25:35 PM #19 Phase 24 File dlgbrnst.cpp, Line 1852 Caching of files started 6:25:35 PM #20 Phase 25 File dlgbrnst.cpp, Line 1852 Caching of files completed 6:25:35 PM #21 Phase 36 File dlgbrnst.cpp, Line 1852 Burn process started at 2x (2,760 KB/s) 6:25:35 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 6:25:35 PM #23 Text 0 File dlgbrnst.cpp, Line 1712 Set remaining time: 25:26,519 (1526519ms) -> OK 6:25:35 PM #24 Text 0 File DVDR.cpp, Line 1418 Recording mode: Sequential Recording Mode 6:25:35 PM #25 Text 0 File Mmc.cpp, Line 18510 Set BUFE: JustLink -> ON 6:25:35 PM #26 Text 0 File DVDR.cpp, Line 1533 Start write address at LBA 0 DVD high compatibility mode: Yes 6:25:35 PM #27 Text 0 File Cdrdrv.cpp, Line 7842 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 60 00 10 20 30 40 50 00 - 00 00 21 00 00 00 00 00 `...0@P...!..... 02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 6:25:35 PM #28 SCSI -1046 File Cdrdrv.cpp, Line 1154 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x1F 0x4F 0xB0 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 6:25:35 PM #29 CDR -1046 File ThreadedTransferInterface.cpp, Line 1508 Illegal disc 6:25:35 PM #30 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1508 Could not perform start of Disc-at-once 6:25:35 PM #31 Text 0 File dlgbrnst.cpp, Line 1712 Set remaining time: 0:00,000 (0ms) -> OK 6:25:35 PM #32 Phase 38 File dlgbrnst.cpp, Line 1852 Burn process failed at 2x (2,760 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/08/2004 4:59:42 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) i converted this avi i downloaded to vob ... that worked fine but im having trouble picking up the problem when it comes to this. This also happens when i use dvdshrink and go through nero.. plz help i worked before i got my computer reformatted but now it does want 2 work 4 some reason..... i wud appreciate any advice thx guys
Sorry for the other thread i didnt read ur rules... i tried some of ur advice given to otha ppl but it does seem to help.
Your version of Nero is outdated, update from here http://httpdl2.usw.nero.com/Nero-6.6.0.18.exe http://httpdl1.usw.nero.com/Nero-6.6.0.18.exe Its OK to burn at 4X The firmware for your burner is several versions behind, the latest is 1.0c, update from here http://forum.rpc1.org/dl_firmware.php?download_id=1517 Try these few suggestions and if they dont solve the problem get back to us.
Theres been a few problems with Nero links, suggest you try again later, in the meantime fix that firmware update.
Theres no harm in trying again, upgrading Nero can only help things but if you cant wait, try to burn after firmware upgrade.
yeh i got the upgrade. now here the new error log Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 5:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0C - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <LITE-ON COMBO LTC-48161H>Version: KH0R - HA 0 TA 1 - 6.6.0.18 Adapter driver: <atapi> HA 0 === Scsi-Device-Map === DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON COMBO LTC-48161H atapi Port 0 ID 1 DMA: On CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === LITE-ON COMBO LTC-48161H D: CDRom0 _NEC DVD_RW ND-1300A E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 123MB (126808kB) Memory in use : 75 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 8.3.2006 UDF/ISO compilation 6:08:00 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 6:08:00 PM #2 Text 0 File DVDVideoCompilation.cpp, Line 552 Content of VIDEO_TS.IFO has been modified 6:08:00 PM #3 Text 0 File DVDVideoCompilation.cpp, Line 552 Content of VIDEO_TS.BUP has been modified 6:08:00 PM #4 Text 0 File DVDVideoCompilation.cpp, Line 552 Content of VTS_01_0.IFO has been modified 6:08:00 PM #5 Text 0 File DVDVideoCompilation.cpp, Line 552 Content of VTS_01_0.BUP has been modified 6:08:00 PM #6 Phase 113 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed 6:08:00 PM #7 Text 0 File Isodoc.cpp, Line 6359 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 6:08:00 PM #8 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 6:08:00 PM #9 Text 0 File Reader.cpp, Line 127 Reader running 6:08:00 PM #10 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 6:08:01 PM #11 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 6:08:01 PM #12 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 6:08:01 PM #13 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2052015 (456:00.15, 4007MB) 6:08:01 PM #14 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 6:08:01 PM #15 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R Disc Manufacturer: TTH02 - Disc Application Code: 64, Disc Physical Code: 193 6:08:01 PM #16 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 6:08:01 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2052016 (2052016) = #2052016/456:0.16 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2052016 blocks [_NEC DVD_RW ND-1300A] -------------------------------------------------------------- 6:08:01 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4202528768, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2052016 | lead-out | 1 | 0x41 | 0x00 6:08:01 PM #19 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 6:08:02 PM #20 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 6:08:02 PM #21 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 6:08:02 PM #22 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2.4x (3,324 KB/s) 6:08:02 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 6:08:02 PM #24 Text 0 File DVDR.cpp, Line 2571 Recording mode: Sequential Recording Mode 6:08:02 PM #25 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Buffer underrun protection -> ON 6:08:02 PM #26 Text 0 File DVDR.cpp, Line 2726 Start write address at LBA 0 DVD high compatibility mode: Yes 6:08:02 PM #27 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 6:08:02 PM #28 SCSI -1046 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x1F 0x4F 0xB0 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 6:08:02 PM #29 CDR -1046 File ThreadedTransferInterface.cpp, Line 1778 Illegal disc 6:08:02 PM #30 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1778 Could not perform start of Disc-at-once 6:08:02 PM #31 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2.4x (3,324 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/08/2004 4:59:42 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
@adoniss The only thing I could think of is the "media" and "burning speed". By looking at the above errors, taken from your log, it (your burner) stated that it doesn't like the media you're using. Try other top notch DVD+R media like Taiyo Yuden, Verbatim "Advanced Azo" or Hitachi Maxell (made in japan). These are high quality media, and yes.. I've used them hundreds and hundreds (thousand) and I've never had any burning issues or playback issues. Try to burn anywhere from 4X - 8X, with high quality media like I've mentioned, you shouldn't have to worry much. Sometimes burning too slow (1X, 2X, 2.4X) or too fast (12X, 16X, etc.) may trigger some issues. The only time I burned with 2.4X is when I'm using Verbatim 2.4X DVD+R DL for a DVD9 backup movie only.
IT WORKS!!! man ur a legend.... if their was a legand it wud b u!!!! thx so much dude..... it was doin my head in.... i did no wat was wrong.. THX again man.
@adoniss You're welcome mate and glad I could help. I tried to help out Newbies and or those that needed helps as much as I can. Happy burning!!
alkahol Please can you have a look at my log? I'm getting an illegal disk error too, my burner firmware is up to date and it has only happened since I upgraded to Nero 7.0.8.2 from 6.6.1.4 and on -r and -rw discs I have been using for some time Don Hardie . Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=0, 2, 1, 3, size=66560 bytes, created 24/08/1999 8:55:32 PM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 12:54:32 PM NT-SPTI used Nero Version: 7.0.8.2 Internal Version: 7, 0, 8, 2 Recorder: <LITE-ON DVDRW SOHW-832S> Version: VS0G - HA 1 TA 0 - 7.0.8.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <LITE-ON DVDRW SOHW-832S >Version: VS0G - HA 1 TA 0 - 7.0.8.2 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD800BB-22JHA0 atapi Port 0 ID 0 DMA: On DiskPeripheral : HDS722516VLAT20 atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 0 DMA: On CdRomPeripheral : CD-RW CDR-6S48 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === LITE-ON DVDRW SOHW-832S G: CDRom0 CD-RW CDR-6S48 H: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1022MB (1047280kB) Free physical memory: 564MB (577796kB) Memory in use : 44 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 14.4.2006 UDF/ISO compilation 3:22:19 PM #1 Phase 112 File dlgbrnst.cpp, Line 1730 DVD-Video files reallocation started 3:22:19 PM #2 Phase 114 File dlgbrnst.cpp, Line 1730 DVD-Video files reallocation completed (no file modified) 3:22:19 PM #3 Text 0 File Isodoc.cpp, Line 6423 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 3:22:19 PM #4 Phase 111 File dlgbrnst.cpp, Line 1730 DVD-Video files sorted 3:22:19 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 81920KB of Memory 3:22:19 PM #6 Text 0 File Reader.cpp, Line 124 Reader running 3:22:19 PM #7 Text 0 File Writer.cpp, Line 113 Writer G: LITE-ON DVDRW SOHW-832S running 3:22:19 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 3:22:19 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 3:22:19 PM #10 Text 0 File Burncd.cpp, Line 3353 Turn on Disc-At-Once, using DVD media 3:22:20 PM #11 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2069343 (459:51.18, 4041MB) 3:22:20 PM #12 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 3:22:20 PM #13 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: LITE-ON DVDRW SOHW-832S, Media type: DVD-RW Disc Manufacturer: OPTODI - SCW002 Disc Application Code: 64, Disc Physical Code: 214 3:22:20 PM #14 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:22:20 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2069344 (2069344) = #2069344/459:51.19 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2069344 blocks [G: LITE-ON DVDRW SOHW-832S] -------------------------------------------------------------- 3:22:20 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [G: LITE-ON DVDRW SOHW-832S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4238016512, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2069344 | lead-out | 1 | 0x41 | 0x00 3:22:20 PM #17 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 3:22:20 PM #18 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 3:22:20 PM #19 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 3:22:20 PM #20 Text 0 File Burncd.cpp, Line 4187 Cache writing successful. 3:22:20 PM #21 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 3:22:20 PM #22 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 2x (2,770 KB/s) 3:22:20 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 3:22:20 PM #24 Text 0 File DVDR.cpp, Line 2760 Recording mode: Sequential Recording Mode 3:22:20 PM #25 Text 0 File DVDR.cpp, Line 2916 Start write address at LBA 0 DVD high compatibility mode: Yes 3:22:20 PM #26 Text 0 File Cdrdrv.cpp, Line 8661 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-RW (3), Part Version: 1.1x (2) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 80 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 3:22:28 PM #27 Text 0 File Cdrdrv.cpp, Line 1211 15:22:28.578 - G: LITE-ON DVDRW SOHW-832S : Queue again later 3:29:14 PM #28 SPTI -1046 File SCSIPassThrough.cpp, Line 290 G: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 00 00 00 0C 20 00 00 20 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05 Buffer x05320000: Len x10000 0x00 00 01 BA 44 01 FD 08 05 89 01 89 C3 F8 00 00 0x01 E0 07 EC 81 00 0A FF FF FF FF FF FF FF FF FF 0xFF 35 45 9F AA C5 10 7A 5D 72 AC 62 18 93 FC B0 3:29:14 PM #29 CDR -1046 File Writer.cpp, Line 302 Illegal disc G: LITE-ON DVDRW SOHW-832S 3:29:14 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 3:29:14 PM #31 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 3:29:14 PM #32 Text 0 File DVDR.cpp, Line 3156 EndDAO: Last written address was 3103 3:29:14 PM #33 Phase 181 File dlgbrnst.cpp, Line 1730 Writing lead-out... 3:29:14 PM #34 Text 0 File DVDR.cpp, Line 3189 Estimated time for 30mm Borders: 6min 42sec 3:29:14 PM #35 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 2x (2,770 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 19/01/2006 11:05:36 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
