Can Someone please tell me what I am Doing wrong?? Thanks Here is my Nero Log: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 11:06:00 AM ahead WinASPI: File 'F:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 11:35:32 AM Nero Version: 6.6.0.19 Internal Version: 6, 6, 0, 19b (Nero Express) Recorder: <LITE-ON DVDRW SHW-160P6S>Version: PS0B - HA 1 TA 0 - 6.6.0.19 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <LITE-ON DVDRW SHW-160P6S>Version: PS0B - HA 1 TA 0 - 6.6.0.19 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y160M0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SHW-160P6S atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === LITE-ON DVDRW SHW-160P6S H: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 188MB (192648kB) Memory in use : 63 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.12.2006 UDF/ISO compilation 6:15:49 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 6:15:49 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 6:15:50 AM #3 Text 0 File Isodoc.cpp, Line 6368 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : TRUE Write : FALSE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 6:15:50 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 6:15:50 AM #5 Text 0 File Reader.cpp, Line 127 Reader running 6:15:50 AM #6 Text 0 File Writer.cpp, Line 122 Writer LITE-ON DVDRW SHW-160P6S running 6:15:50 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 6:15:50 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 6:15:50 AM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 6:15:50 AM #10 Text 0 File DlgWaitCD.cpp, Line 272 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2243103 (498:28.03, 4381MB) 6:15:50 AM #11 Text 0 File DlgWaitCD.cpp, Line 284 Write in overburning mode: NO (enabled: CD) 6:15:50 AM #12 Text 0 File DlgWaitCD.cpp, Line 2494 Recorder: LITE-ON DVDRW SHW-160P6S, Media type: DVD-R Disc Manufacturer: TYG02 - Disc Application Code: 64, Disc Physical Code: 193 6:15:50 AM #13 Text 0 File DlgWaitCD.cpp, Line 450 >>> Protocol of DlgWaitCD activities: <<< ========================================= 6:15:50 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2243104 (2243104) = #2243104/498:28.4 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2243104 blocks [LITE-ON DVDRW SHW-160P6S] -------------------------------------------------------------- 6:15:50 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [LITE-ON DVDRW SHW-160P6S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4593876992, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2243104 | lead-out | 1 | 0x41 | 0x00 6:15:50 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 6:15:50 AM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 6:15:50 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 6:15:50 AM #19 Phase 32 File dlgbrnst.cpp, Line 1832 Simulation started at 8x (11,080 KB/s) 6:15:50 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 6:15:50 AM #21 Text 0 File DVDR.cpp, Line 2624 Recording mode: Sequential Recording Mode 6:15:50 AM #22 Text 0 File Mmc.cpp, Line 21860 Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON 6:15:50 AM #23 Text 0 File DVDR.cpp, Line 2779 Start write address at LBA 0 DVD high compatibility mode: Yes 6:15:50 AM #24 Text 0 File Cdrdrv.cpp, Line 8926 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 6:15:53 AM #25 Text 0 File Cdrdrv.cpp, Line 1289 06:15:53.250 - LITE-ON DVDRW SHW-160P6S\H1 T0 : Queue again later 6:18:02 AM #26 SCSI -1046 File Cdrdrv.cpp, Line 1437 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0BB50000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 0x00 0x00 0x00 0x09 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 6:18:02 AM #27 CDR -1046 File Writer.cpp, Line 311 Illegal disc 6:18:02 AM #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 6:18:02 AM #29 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 6:18:02 AM #30 Text 0 File DVDR.cpp, Line 3022 EndDAO: Last written address was 2303 6:18:07 AM #31 Phase 34 File dlgbrnst.cpp, Line 1832 Simulation failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=6.2.0.134 , size=24698 bytes, created 12/9/2003 6:24:58 PM File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 11:06:00 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 4:03:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
you are using Nero 6.6.0.19 ...... I don't know about your version but the more stable version of Nero 6 is 6.6.0.18: Before udating to 6.6.0.18 I would save the serial #, uninstall Nero, then use the cleaning tools : http://ww2.nero.com/nero6/eng/Clean_Tools.html then do a registry clean up and defrag...... then reboot! install package one: http://httpdl1.usw.nero.com/Nero-6.6.0.18_no_yt.exe then install package two: http://www.nero.com/nero6/eng/Patch_for_NVE3.html reboot and you're good to go! your firmware is up to date but yet it says maybe having Roxio packet writing software on your computer: is causing you this problem with Illegal Disc! Uninstall Roxio or any sister programs like Sonic..... then run the Roxio Zapper: http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml do another registry clean up and reboot...... Also your running a little high in your RAM: try to shut down all unnecessary programs running in the background to free up some memory! Do not multitask, go online and even shut your anti virus software while burning! try these things and hopefully you'll have success! good luck.
thanx IHoe, I downloaded what you said, but I first tried the Roxio stuff. I uninstalled Roxio and Sonic stage and Roxio Photosuite? just to be sure. I also ran the Roxio Zap and then restarted my PC. Tried a simulated burn on a 8x Taiyo-Yuden. It worked, then I burned it, that worked. I then burned a cheap Playo 16x, it worked then, OMG, I tried a Memorex +R DL at 2.4x and it worked. So I must say THANK YOU VERY MUCH!! You were Most helpful. Just a word for others, I really think all these problem come from Roxio. Toodles!!
just to let you know....... I have both Roxio and Nero on my computer and there isn't a problem! it's packet writing...... some computers can withstand both programs on the same machine. Soooooo it's a try it and see if this is causing your problem....... this is what packet writing may do with your computer: Packet writing utilities such as "InCD" or Roxio are notorious for interfering with burn processes, as the way it works is to continually poll the burner to check for new media. This prevents the burn application gaining exclusive access to the burner, and sense code errors will happen - every time. Get rid of all packet writing utilities. They are more trouble than they are worth. soooooooo some computers can take it others can't! if taking out Roxio helped your computer....... then cool! I'm glad it helped you!
