help me suddently I cant burn anymore im using sony dvd+r medias have tried to updato nero. here is my log: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Programmer\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26-10-2004 17:35:34 Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0H - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <LITE-ON DVDRW SOHW-1633S>Version: BS0H - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ExcelStor Technology J240 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On CdRomPeripheral : CD-R/RW CW079D CD-R/RW atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW SOHW-1633S E: CDRom0 CD-R/RW CW079D CD-R/RW D: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 39845888 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 247MB (253424kB) Free physical memory: 94MB (96964kB) Memory in use : 61 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 3.4.2006 ===== Disc-Copy over image - 1st step : Copy to image ... 21:31:26 #1 Text 0 File Reader.cpp, Line 127 Reader running 21:31:26 #2 Text 0 File Writer.cpp, Line 122 Writer Image Recorder running 21:31:26 #3 Text 0 File DVDCopy.cpp, Line 293 DVD Track-Information from source disc: Media Type: DVD-R S01 T01 Con 0x14 Start 0 Len 2286112 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 21:31:26 #4 Text 0 File DVDCopy.cpp, Line 406 Max -1 tracks of 1 allowed to copy 1: 0 - 2286112 = 2286112, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 21:31:26 #5 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 21:31:26 #6 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 2286111 (508:01.36, 4465MB) 21:31:26 #7 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 21:31:26 #8 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 21:31:26 #9 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [Image Recorder] -------------------------------------------------------------- 21:31:26 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286112 | lead-out | 1 | 0x41 | 0x00 21:31:26 #11 Phase 120 File dlgbrnst.cpp, Line 1832 Creating the image for burning 21:31:26 #12 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 21:53:11 #13 Text 0 File WriterStatus.cpp, Line 116 < Image Recorder > start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks 21:53:12 #14 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 21:53:15 #15 Phase 121 File dlgbrnst.cpp, Line 1832 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 21:53:43 #1 Text 0 File Reader.cpp, Line 127 Reader running 21:53:43 #2 Text 0 File Writer.cpp, Line 122 Writer LITE-ON DVDRW SOHW-1633S running 21:53:43 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4681957376 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=508:01.37 ( 2286112) RecDep=0x00 MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\J\Dokumenter\TempImage.nrg> 21:53:44 #4 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 21:55:14 #5 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286111 (508:01.36, 4465MB) 21:55:14 #6 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 21:55:14 #7 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R Disc Manufacturer: SONY16 - D1 Disc Application Code: 64, Disc Physical Code: 193 21:55:14 #8 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD+R DL.) 21:55:14 #9 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [LITE-ON DVDRW SOHW-1633S] -------------------------------------------------------------- 21:55:14 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286112 | lead-out | 1 | 0x41 | 0x00 21:55:14 #11 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2x (2.770 KB/s) 21:55:15 #12 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 21:55:15 #13 Text 0 File DVDR.cpp, Line 2571 Recording mode: Sequential Recording Mode 21:55:15 #14 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON 21:55:15 #15 Text 0 File DVDR.cpp, Line 2726 Start write address at LBA 0 DVD high compatibility mode: Yes 21:55:15 #16 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 21:55:17 #17 SCSI -1046 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09440000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 21:55:17 #18 CDR -1046 File Writer.cpp, Line 311 Illegal disc 21:55:17 #19 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 21:55:17 #20 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 21:55:17 #21 Text 0 File DVDR.cpp, Line 2969 EndDAO: Last written address was -1 21:55:17 #22 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2x (2.770 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 25-04-2005 11:03:00 (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 2, 2, 3, size=99568 bytes, created 24-03-2004 18:44:50 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 2, 2, 3, size=27664 bytes, created 24-03-2004 18:45:22 (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 2, 2, 3, size=9561 bytes, created 24-03-2004 18:45:02 (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 09-10-2001 13:00:00 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) WHAT AM I DOING WRONG PLEASE HELP ME
@hilfe Welcome to aD! Update your firmware - the latest is BSOY. You can turn the dma back on the cd drive: http://my.afterdawn.com/alkohol/blog_entry.cfm/231/dmaissues Use can use some more ram but until then free up as much as possible. No multi-tasking and shut down any unnecessary process. Good media - firmware update may help with the illegal disc & write errors. InCD can cause problems so uninstall it and run the InCD clean tool. http://ww2.nero.com/nero6/enu/InCD_CleanTool.html After you try the above suggestions I'd bump this up to 4x to start.
