I dont know what to do. I always got Illegal disk and burning failed at the end of my DVD burning. I'm using DVD Decrypter, then DVD Shrink and Nero Burning. My Firmware for PIONEER DVD-RW DVR-106D is version 1.10 and my Firmware for MATSHITA DVD-RAM SW-9585 is version B101. I got VAIO RS420 Desktop & 1.5GB DDR RAM. I'm using this thing when burning my DVDs but all of the sudden this error appears. Please anyone help me. Thanks in advance!!!
first of all very good post. only questions it leaves to me is just where in the process do you get the error ripping , compress, burning, and what type of media? I will assume error resides in burning, please post log try opening dvd decrypter then right click on your drive and the drop box will give you the option to check for firmware try this as far as the media in the same drop box it will give a capabilty option check here for compatability issues. as long as the manuf. id is not sub par this will address media issues. good luck.
As DVD Copying is concerned, I'm just new. But I hope this "LONG Log Error" from Nero give you some info to help me. Tnx in advance!!! Butch and Pia Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.15 Internal Version: 6, 6, 0, 15e Recorder: <MATSHITA DVD-RAM SW-9585>Version: B101 - HA 1 TA 1 - 6.6.0.15 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <PIONEER DVD-RW DVR-106D>Version: 1.10 - HA 1 TA 0 - 6.6.0.15 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : HDS722512VLAT20 atapi Port 0 ID 0 DMA: On DiskPeripheral : ST3200822A atapi Port 0 ID 1 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-106D atapi Port 1 ID 0 DMA: On CdRomPeripheral : MATSHITA DVD-RAM SW-9585 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === PIONEER DVD-RW DVR-106D E: CDRom0 MATSHITA DVD-RAM SW-9585 F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1535MB (1572148kB) Free physical memory: 1091MB (1117744kB) Memory in use : 28 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.7.2005 Burn DVD Image 11:25:25 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 11:25:25 PM #2 Text 0 File Writer.cpp, Line 122 Writer MATSHITA DVD-RAM SW-9585 running 11:25:25 PM #3 Text 0 File Burncd.cpp, Line 3231 Turn on Disc-At-Once, using DVD media 11:25:57 PM #4 Text 0 File DlgWaitCD.cpp, Line 267 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2202032 (489:20.32, 4300MB) 11:25:57 PM #5 Text 0 File DlgWaitCD.cpp, Line 279 Write in overburning mode: NO (enabled: CD) 11:25:57 PM #6 Text 0 File DlgWaitCD.cpp, Line 2457 Recorder: MATSHITA DVD-RAM SW-9585, Media type: DVD+R Disc Manufacturer ID: SONY, Media Type ID: D11, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 11:25:57 PM #7 Text 0 File DlgWaitCD.cpp, Line 445 >>> Protocol of DlgWaitCD activities: <<< ========================================= Not enough free discspace. (Medium in drive: DVD+R. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD+R DL.) 11:25:57 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2202033 (2202033) = #2202033/489:20.33 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202033 blocks [MATSHITA DVD-RAM SW-9585] -------------------------------------------------------------- 11:25:57 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [MATSHITA DVD-RAM SW-9585] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4509763584, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2202033 | lead-out | 1 | 0x41 | 0x00 11:25:57 PM #10 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 11:25:57 PM #11 Text 0 File Burncd.cpp, Line 4116 Cache writing successful. 11:25:57 PM #12 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 11:25:57 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11,080 KB/s) 11:25:57 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 11:25:57 PM #15 Text 0 File Cdrdrv.cpp, Line 8821 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: SONY.... Media type ID: D11 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 53 4F 4E 59 00 - 00 00 00 44 31 31 00 38 ...SONY....D11.8 23 54 37 14 00 32 6F 00 - 96 6A 17 19 0C 0C 0A 0B #T7..2o..j...... 01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................ 11:25:57 PM #16 Text 0 File DVDPlusRW.cpp, Line 663 Start write address at LBA 0 DVD high compatibility mode: No 11:29:10 PM #17 SCSI -1039 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04A30000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x09 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x09 0x05 0x40 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF1 0x00 0x04 0x00 0x09 0x02 0x50 0x0A 0x00 0x31 0x00 0x00 0x09 0x02 11:29:10 PM #18 CDR -1039 File Writer.cpp, Line 311 Focus or tracking error 11:29:10 PM #19 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:29:10 PM #20 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 11:30:20 PM #21 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.53a, size=17136 bytes, created 6/3/2003 2:02:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
