I have been using these Fujifilm DVD-Rs for sometime now. At first when I just entered this world I just bought boxes of ten but when I went to the store the other day I figured i'd save myself a few trips and buy a thing of 50 disks. Now idk if Fujifilm decided to change their dvds when I bought the 50 pack but none of these dvds will work when I try to burn a dvd. I was able to burn fine with the 10 packs. I made sure they were the same kind of dvd-r. But now it just keeps giving me an illegal disk error. Can anyone help me? I have also tried sony dvd-r's too but they don't wanna work either. And I am very sure I have all the same settings on my programs. First I use DVD decripter, then I use DVD shrink to burn the dvd. Heres the log thing: Edit: Is it possible that my dvd burner has died and i need to get it fixed or get a new one? [*Serial Removed*] Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero API version: 6.6.0.13 Using interface version: 6.0.0.0 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 13c Recorder: <_NEC DVD_RW ND-1300A> Version: 1.05 - HA 2 TA 0 - 6.6.0.13 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : Maxtor 4D080H4 atapi Port 0 ID 0 DMA: On CdRomPeripheral : MITSUMI CR-48XCTE atapi Port 1 ID 0 DMA: Off CdRomPeripheral : PIONEER DVD-ROM DVD-117 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === MITSUMI CR-48XCTE E: CDRom0 PIONEER DVD-ROM DVD-117 F: CDRom1 _NEC DVD_RW ND-1300A G: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 230MB (236484kB) Memory in use : 54 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 6.6.2005 NeroAPI 10:24:30 AM #1 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 10:24:30 AM #2 Text 0 File Reader.cpp, Line 127 Reader running 10:24:30 AM #3 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 10:24:30 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 10:24:30 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 10:24:30 AM #6 Text 0 File Burncd.cpp, Line 3167 Turn on Disc-At-Once, using DVD media 10:24:31 AM #7 Text 0 File DlgWaitCD.cpp, Line 260 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2214303 (492:04.03, 4324MB) 10:24:31 AM #8 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: NO 10:24:31 AM #9 Text 0 File DlgWaitCD.cpp, Line 2339 Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R Disc Manufacturer: Prodis - cF01 Disc Application Code: 64, Disc Physical Code: 193 10:24:31 AM #10 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:24:31 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2214304 (2214304) = #2214304/492:4.4 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2214304 blocks [_NEC DVD_RW ND-1300A] -------------------------------------------------------------- 10:24:31 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4534894592, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2214304 | lead-out | 1 | 0x41 | 0x00 10:24:31 AM #13 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 10:24:31 AM #14 Text 0 File Burncd.cpp, Line 4051 Cache writing successful. 10:24:31 AM #15 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 10:24:31 AM #16 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 2.4x (3,324 KB/s) 10:24:32 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:24:32 AM #18 Text 0 File DVDR.cpp, Line 2267 Recording mode: Sequential Recording Mode 10:24:32 AM #19 Text 0 File Mmc.cpp, Line 21469 Set BUFE: Buffer underrun protection -> ON 10:24:32 AM #20 Text 0 File DVDR.cpp, Line 2421 Start write address at LBA 0 DVD high compatibility mode: Yes 10:24:32 AM #21 Text 0 File Cdrdrv.cpp, Line 8438 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:24:32 AM #22 SCSI -1046 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x21 0xC9 0xA0 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 10:24:32 AM #23 CDR -1046 File ThreadedTransferInterface.cpp, Line 1765 Illegal disc 10:24:32 AM #24 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1765 Could not perform start of Disc-at-once 10:24:32 AM #25 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 2.4x (3,324 KB/s) 10:24:32 AM #26 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 10:24:32 AM #27 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM File 'Drivers\PXHELP20.SYS': Ver=2.02.38a, size=16288 bytes, created 4/18/2002 12:02:00 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Try updating your firmware http://www.de.nec.de/softwareoverview2.php/id/557 Scroll down until you see your burner, I believe your behind by about 5 updates, current is 1.0B
Thank you very much. I have one more question but I believe it has to do more with other parts of my computer than any dvd writing situation I would become involved in. When I begin to encode a movie the Kb/s goes down to the hundreds and makes it go very slow I think because of the fact there is something or a few things that are draining space from my harddrive little by little. I think this may be because when I look at the space available before I hit backup it is sometimes slowly going down MB by MB. Do anyone of you know what my problem is with the slow Kb/s if its what I think or a different problem and how I can fix it? Also: I try going into the task manager and shutting down some programs to speed it up but I usually end up knocking out the sound and making my computer worse than it is rather than fixing it. Edit: I also think it may be a virus or spyware but my computer usually freezes up before it can end the scanning lol. Another Edit: Now that I try it again it seems that the slowdown is an on and off thing idk what the hell is wrong with it lol i'll figure it out
do a virus scan, and check for adware and spyware. Then defrag. That should help you out a little bit. To really speed things up though, you should look into more RAM. And just so you know, it's completely normal for encoding to start out really fast, then gradually get slower and slower. Don't know why... Are you using DVD Shrink?? Although Shrink's a great program, there are faster ones, such as CloneDVD 2, which do just as good a job encoding.
@Ratpoizen I edited out your Nero serial from the log. You should make sure and remove that before posting. We don't want people stealing it.
