OK I need help. I am backing up a season of a particular show onto DVD+R DL and I am using ImgBurn and everything seemed to be going alright until near the end of the first layer on some discs the DVD Player stopped playing the discs correctly. All 7 Discs have roughly the same amount of Data - from 7.5-7.89 GB. All discs play fine in the Computer but some do not play fine in any of my DVD players, and I am thinking it is the layer break. Discs 1,3,and 7 all play fine but the layer break is in a different position than in the other discs which are all 50%/50% on both layers, except for disc 5. I thought that was the problem but disc 5 does not play good in standalones either and it is over 50% on layer zero. I know I have not mentioned very specific details here, but here is one. Disc 2 is the one that I first noticed a problem and here is Img Burn's info on it. I cannot figure out why it only gives me One layer break option when I go to build mode. Is this really the reason why my standalone won't play it or what? Physical Format Information (Last Recorded): Disc ID: MKM-001-00 Book Type: DVD-ROM Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,272,127 Layer Information: Layer 0 Sectors: 2,075,520 (50%) Layer 1 Sectors: 2,075,520 (50%)
