Infamous Illegal disc error in Nero

Discussion in 'Nero discussion' started by Jsb9595, Jan 27, 2006.

Page 1 of 2
  1. Jsb9595

    Jsb9595 Member

    Joined:
    Jan 27, 2006
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    hello all, im ne3w to this forum but have been reading up alot on it lately cause I too have had the illegal disc error message right after caching. I have burned lots of dvd's before using the recode and what not but, im trying to make a data disc and it wont let me. I have read the updating the firmware and making sure i have a newer version of nero stuff which i have done but its still not working! here is my log file i hope you guys can help!


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.1.4
    Internal Version: 7, 0, 1, 4

    Recorder: <Memorex DVD+/-DLRWL1 F16>Version: BWSE - HA 1 TA 0 - 7.0.1.4
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <Memorex DVD+/-DLRWL1 F16>Version: BWSE - HA 1 TA 0 - 7.0.1.4
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : TOSHIBA MK4019GAX atapi Port 0 ID 0 DMA: On
    DiskPeripheral : WDC WD2500JS-00MHB0 atapi Port 1 ID 0 DMA: On
    DiskPeripheral : WDC WD1200JD-00FYB0 atapi Port 2 ID 0 DMA: On
    CdRomPeripheral : Memorex DVD+/-DLRWL1 F16 atapi Port 3 ID 0 DMA: On
    CdRomPeripheral : Memorex 52MAXX 3252AJ atapi Port 3 ID 1 DMA: On
    DiskPeripheral : fasttx2k Port 4 ID 0 DMA: Off

    === CDRom-Device-Map ===
    Memorex DVD+/-DLRWL1 F16 E: CDRom0
    Memorex 52MAXX 3252AJ F: CDRom1
    =======================

    AutoRun : 0
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1022MB (1047276kB)
    Free physical memory: 270MB (276620kB)
    Memory in use : 73 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    27.1.2006
    UDF compilation
    5:54:33 PM #1 Text 0 File Isodoc.cpp, Line 6411
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : TRUE
    Simulate : TRUE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : pure
    UDF Revision : 1.02
    UDF Partition Type : physical

    5:54:34 PM #2 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 262144KB of Memory

    5:54:34 PM #3 Text 0 File Reader.cpp, Line 124
    Reader running

    5:54:34 PM #4 Text 0 File Writer.cpp, Line 113
    Writer E: Memorex DVD+/-DLRWL1 F16 running

    5:54:34 PM #5 Text 0 File Burncd.cpp, Line 3342
    Turn on Disc-At-Once, using DVD media

    5:54:57 PM #6 Text 0 File DlgWaitCD.cpp, Line 279
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2105551 (467:54.01, 4112MB)

    5:54:57 PM #7 Text 0 File DlgWaitCD.cpp, Line 291
    Write in overburning mode: NO (enabled: CD)

    5:54:57 PM #8 Text 0 File DlgWaitCD.cpp, Line 2578
    Recorder: Memorex DVD+/-DLRWL1 F16, Media type: DVD-R
    Disc Manufacturer: MXL RG - 04
    Disc Application Code: 64, Disc Physical Code: 193

    5:54:57 PM #9 Text 0 File DlgWaitCD.cpp, Line 458
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)

    5:54:57 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2105552 (2105552) = #2105552/467:54.2
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2105552 blocks [E: Memorex DVD+/-DLRWL1 F16]
    --------------------------------------------------------------

    5:54:57 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [E: Memorex DVD+/-DLRWL1 F16] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4312170496, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2105552 | lead-out | 1 | 0x41 | 0x00

    5:54:57 PM #12 Text 0 File SCSIPassThrough.cpp, Line 36
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    5:54:57 PM #13 Phase 24 File dlgbrnst.cpp, Line 1725
    Caching of files started

    5:54:57 PM #14 Text 0 File Burncd.cpp, Line 4176
    Cache writing successful.

    5:54:57 PM #15 Phase 25 File dlgbrnst.cpp, Line 1725
    Caching of files completed

    5:54:57 PM #16 Phase 28 File dlgbrnst.cpp, Line 1725
    Speed measurement started

    5:54:57 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    5:56:44 PM #18 Text 0 File WriterStatus.cpp, Line 116
    <E: Memorex DVD+/-DLRWL1 F16> start writing Lead-Out at LBA 2105552 (2020D0h), length 0 blocks

    5:56:44 PM #19 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    5:56:44 PM #20 Phase 29 File dlgbrnst.cpp, Line 1674
    Speed measurement completed: 29.8x (41,170 KB/s)

    5:56:44 PM #21 Phase 32 File dlgbrnst.cpp, Line 1725
    Simulation started at 4x (5,540 KB/s)

    5:56:44 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    5:56:44 PM #23 Text 0 File DVDR.cpp, Line 2580
    Recording mode: Sequential Recording Mode

    5:56:44 PM #24 Text 0 File MMC.cpp, Line 21611
    Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON

    5:56:44 PM #25 Text 0 File DVDR.cpp, Line 2735
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    5:56:44 PM #26 Text 0 File Cdrdrv.cpp, Line 8411
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    5:56:52 PM #27 SPTI -1046 File SCSIPassThrough.cpp, Line 323
    E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05
    Buffer x04c90000: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    5:56:52 PM #28 CDR -1046 File Writer.cpp, Line 302
    Illegal disc
    E: Memorex DVD+/-DLRWL1 F16

    5:56:52 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    5:56:53 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    5:56:53 PM #31 Text 0 File DVDR.cpp, Line 2978
    EndDAO: Last written address was -1

    5:56:53 PM #32 Phase 34 File dlgbrnst.cpp, Line 1725
    Simulation failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 5/19/2004 12:33:44 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\InCDfs.SYS': Ver=5, 0, 0, 4, size=101760 bytes, created 10/14/2005 12:00:36 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDpass.SYS': Ver=5, 0, 0, 4, size=29440 bytes, created 10/14/2005 12:01:56 PM (InCD4 driver for win NT/2K/XP)
    File 'Drivers\InCDrec.SYS': Ver=5, 0, 0, 4, size=8704 bytes, created 10/14/2005 12:00:32 PM (InCD4 driver for win NT/2K/XP)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    thanks guys!
     
    Jsb9595, Jan 27, 2006
    #1
  2. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    10,818
    Likes Received:
    4
    Trophy Points:
    118
    InCD is known to cause conflicts when burning to DVD's, if you don't need it I would look into removing it.
     
    LOCOENG, Jan 30, 2006
    #2
  3. b18bek9

    b18bek9 Regular member

    Joined:
    Dec 25, 2005
    Messages:
    180
    Likes Received:
    0
    Trophy Points:
    26
    let me guess your using memorex disc's?...because i got a similarm essage when i tried to use memorex's new 16x dvd's i dont know whats wrong with yours but well just a guess
     
    b18bek9, Jan 30, 2006
    #3
  4. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    10,818
    Likes Received:
    4
    Trophy Points:
    118
    Using Maxells discs.
     
    LOCOENG, Jan 31, 2006
    #4
  5. Jsb9595

    Jsb9595 Member

    Joined:
    Jan 27, 2006
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    Hello an update.... after all was said and done and trying all the tricks i read in this forum about fixing the problem, liek updating firmware, updating Nero, heck i even read somewhere installing Musicmatch before Nero could mess up Nero and cause the error, BUT i finally got it to work just by changing my media. I went and purchased some TDK DVD's they were only 8x DVD's as compared to the Maxell's 16x ones i purchased (maybe that was the culprit right there the burner doesn't know how to recognize a 16x disc....????) But yes i put the TDK disc in and walla worked great the first time. Its just all kinda confusing since the DVD rating sites say Maxell is a very good brand to buy and even the guys i bought it from were puzzled cause they said it was good. Sooo.... for now the problem is fixed. thanks for helping!
     
    Jsb9595, Jan 31, 2006
    #5
  6. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    10,818
    Likes Received:
    4
    Trophy Points:
    118
    It is always a good idea to start with the cheapest and easiest solutions first, such as changing media and updating programs...firmware updates are usually reserved for a last fix because a bad flash can ruin a drive. However, I like to lay it all out there for the poster(you) to decide what you do and don't want to try.

    Anywhoo...I'm glad the problem is resolved for now.

    Happy burning.

    Edit: Maxell is all I use, and IMHO they are some of the best available, so it is a suprise to me as well...notice I didn't suggest a media change.
     
    Last edited: Jan 31, 2006
    LOCOENG, Jan 31, 2006
    #6
  7. b18bek9

    b18bek9 Regular member

    Joined:
    Dec 25, 2005
    Messages:
    180
    Likes Received:
    0
    Trophy Points:
    26
    jsb i stick to sony 16x never havea problem bad thing is i hate sony for the other things they do but hey give me a descent product and i'ma stick with it
     
    b18bek9, Feb 2, 2006
    #7
  8. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    10,818
    Likes Received:
    4
    Trophy Points:
    118
    The best advice it to do/use what works best for you, every systems tolerances are different.

    I would agree with you on the Sony slant, I own several Sony products but don't always agree with their business practices.
     
    LOCOENG, Feb 2, 2006
    #8
  9. jayjay23

    jayjay23 Member

    Joined:
    Feb 12, 2006
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    im new to this and i can burn tkd +'s just fine but i cant burn tdk -'s any suggestions will help heres my error log
    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 7:06:00 AM
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.1.4
    Internal Version: 7, 0, 1, 4
    (Nero Express)
    Recorder: <HP DVD Writer 635d> Version: JPS3 - HA 1 TA 0 - 7.0.1.4
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
    Connected to MMC as unknown drive with class-nr : 1
    Drive is autodetected - recorder class: Std. MMC recorder
    CD-ROM: <HP DVD Writer 635d >Version: JPS3 - HA 1 TA 0 - 7.0.1.4
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD400EB-11CPF0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : ST3200822A atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : HP DVD Writer 635d atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8483B atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HP DVD Writer 635d D: CDRom0
    HL-DT-ST CD-RW GCE-8483B E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 1
    BUFE : 0
    Physical memory : 509MB (522224kB)
    Free physical memory: 112MB (114720kB)
    Memory in use : 78 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    12.2.2006
    UDF/ISO compilation
    2:52:55 PM #1 Phase 112 File dlgbrnst.cpp, Line 1725
    DVD-Video files reallocation started

    2:52:55 PM #2 Phase 114 File dlgbrnst.cpp, Line 1725
    DVD-Video files reallocation completed (no file modified)

    2:52:55 PM #3 Text 0 File Isodoc.cpp, Line 6411
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    2:52:55 PM #4 Phase 111 File dlgbrnst.cpp, Line 1725
    DVD-Video files sorted

    2:52:55 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 72704KB of Memory

    2:52:55 PM #6 Text 0 File Reader.cpp, Line 124
    Reader running

    2:52:55 PM #7 Text 0 File Writer.cpp, Line 113
    Writer D: HP DVD Writer 635d running

    2:52:55 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    2:52:55 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    2:52:55 PM #10 Text 0 File Burncd.cpp, Line 3342
    Turn on Disc-At-Once, using DVD media

    2:52:56 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 457311 (101:37.36, 893MB)

    2:52:56 PM #12 Text 0 File DlgWaitCD.cpp, Line 291
    Write in overburning mode: NO (enabled: CD)

    2:52:56 PM #13 Text 0 File DlgWaitCD.cpp, Line 2578
    Recorder: HP DVD Writer 635d, Media type: DVD-R
    Disc Manufacturer: TTH02 -
    Disc Application Code: 64, Disc Physical Code: 193

    2:52:56 PM #14 Text 0 File DlgWaitCD.cpp, Line 458
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    2:52:56 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 457312 (457312) = #457312/101:37.37
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 457312 blocks [D: HP DVD Writer 635d]
    --------------------------------------------------------------

    2:52:56 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [D: HP DVD Writer 635d] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 936574976, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    457312 | lead-out | 1 | 0x41 | 0x00

    2:52:56 PM #17 Text 0 File SCSIPassThrough.cpp, Line 36
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    2:52:56 PM #18 Phase 24 File dlgbrnst.cpp, Line 1725
    Caching of files started

    2:52:56 PM #19 Text 0 File Burncd.cpp, Line 4176
    Cache writing successful.

    2:52:56 PM #20 Phase 25 File dlgbrnst.cpp, Line 1725
    Caching of files completed

    2:52:56 PM #21 Phase 36 File dlgbrnst.cpp, Line 1725
    Burn process started at 6x (8,310 KB/s)

    2:52:56 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    2:52:56 PM #23 Text 0 File DVDR.cpp, Line 2580
    Recording mode: Sequential Recording Mode

    2:52:56 PM #24 Text 0 File MMC.cpp, Line 21611
    Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON

    2:52:56 PM #25 Text 0 File DVDR.cpp, Line 2735
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    2:52:56 PM #26 Text 0 File Cdrdrv.cpp, Line 8411
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    2:53:40 PM #27 Text 0 File Cdrdrv.cpp, Line 1197
    14:53:40.687 - D: HP DVD Writer 635d : Queue again later

    2:56:28 PM #28 SPTI -1046 File SCSIPassThrough.cpp, Line 323
    D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x2A 00 00 00 0E 00 00 00 20 00 00 00
    Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05
    Buffer x07010000: Len x10000
    0x00 00 01 BA 44 03 34 62 84 AB 01 89 C3 F8 00 00
    0x01 E0 07 EC 81 C0 0A 31 00 CD EA A3 11 00 CD A4
    0x41 00 00 01 B3 16 00 F0 C4 02 CE E0 A5 10 11 11

    2:56:28 PM #29 CDR -1046 File Writer.cpp, Line 302
    Illegal disc
    D: HP DVD Writer 635d

    2:56:28 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    2:56:28 PM #31 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    2:56:28 PM #32 Text 0 File DVDR.cpp, Line 2978
    EndDAO: Last written address was 3583

    2:56:28 PM #33 Phase 38 File dlgbrnst.cpp, Line 1725
    Burn process failed at 6x (8,310 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 7:06:00 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 5/20/2005 9:25:14 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
    jayjay23, Feb 12, 2006
    #9
  10. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    10,818
    Likes Received:
    4
    Trophy Points:
    118
    You don't have alot of resources, try to free some up...no multitasking.

    Other than the memory and the TDK blanks, I don't see a whole lot wrong with the log. If the +'s are working stick with them or try a whole new brand all together, like verbatim...taiyo yuden or sony, fuji, maxell(made in Japan).
     
    LOCOENG, Feb 12, 2006
    #10
  11. jayjay23

    jayjay23 Member

    Joined:
    Feb 12, 2006
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    thanks yea the plus's were skipping on my dvd player and it was an apex so i just brought a new dvd player and my tdk pluses work fine and i guess i'll have to stick with plus or try a new brand for minuses thanks for the input
     
    jayjay23, Feb 12, 2006
    #11
  12. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    10,818
    Likes Received:
    4
    Trophy Points:
    118
    Personally I would stick with the +R flavored discs and booktype 'em.

    And you are welcome.
     
    LOCOENG, Feb 12, 2006
    #12
  13. jayjay23

    jayjay23 Member

    Joined:
    Feb 12, 2006
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    yea i thinks thats a good idea now im stuck with a 50 pack of tdk -'s and nothing to do with them
     
    jayjay23, Feb 12, 2006
    #13
  14. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    10,818
    Likes Received:
    4
    Trophy Points:
    118
    You give those and the CMC Mags to friends...LOL
     
    LOCOENG, Feb 12, 2006
    #14
  15. jayjay23

    jayjay23 Member

    Joined:
    Feb 12, 2006
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    lol what brand is cmc-mag anyway?
     
    jayjay23, Feb 12, 2006
    #15
  16. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    10,818
    Likes Received:
    4
    Trophy Points:
    118
    Memorex, Imation, and the list goes on and on...terrible stuff really, stick with the brands that I posted earlier and you shouldn't have any problems.
     
    LOCOENG, Feb 13, 2006
    #16
  17. jmox

    jmox Member

    Joined:
    Dec 22, 2005
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    Can someone take a look at my log, and illegal disc problem?
    I just switched to 16X discs, and haven't been able to make any backups.

    Thanks.

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
    Nero API version: 6.3.1.17
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BGS4 - HA 4 TA 0 - 6.3.1.17
    Adapter driver: <atapi> HA 4
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI

    === Scsi-Device-Map ===
    CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 4 ID 0 DMA: On
    DiskPeripheral : ST3160021A atapi Port 5 ID 0 DMA: On

    === CDRom-Device-Map ===
    LITE-ON DVDRW SOHW-1633S E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 57671680 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 382MB (391664kB)
    Free physical memory: 82MB (84308kB)
    Memory in use : 78 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    21.3.2006
    NeroAPI
    9:23:45 PM #1 Phase 112 File APIProgress.cpp, Line 273
    DVD-Video files reallocation started

    9:23:46 PM #2 Phase 114 File APIProgress.cpp, Line 273
    DVD-Video files reallocation completed (no file modified)

    9:23:46 PM #3 Phase 111 File APIProgress.cpp, Line 273
    DVD-Video files sorted

    9:23:47 PM #4 SCSI -1066 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x0AF35000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    9:23:48 PM #5 Text 0 File Reader.cpp, Line 118
    Reader running

    9:23:48 PM #6 Text 0 File Writer.cpp, Line 124
    Writer LITE-ON DVDRW SOHW-1633S running

    9:23:48 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 817
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    9:23:49 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    9:23:49 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    9:23:49 PM #10 Text 0 File Burncd.cpp, Line 3172
    Turn on Disc-At-Once, using DVD media

    9:23:49 PM #11 Text 0 File DlgWaitCD.cpp, Line 245
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2220783 (493:30.33, 4337MB)

    9:23:49 PM #12 Text 0 File DlgWaitCD.cpp, Line 257
    Write in overburning mode: NO

    9:23:49 PM #13 Text 0 File DlgWaitCD.cpp, Line 2137
    Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
    Disc Manufacturer: MCC 03 - RG20
    Disc Application Code: 64, Disc Physical Code: 193

    9:23:49 PM #14 Text 0 File DlgWaitCD.cpp, Line 418
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    9:23:49 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2220784 (2220784) = #2220784/493:30.34
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2220784 blocks [LITE-ON DVDRW SOHW-1633S]
    --------------------------------------------------------------

    9:23:49 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4548165632, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2220784 | lead-out | 1 | 0x00 | 0x41

    9:23:53 PM #17 Phase 24 File APIProgress.cpp, Line 273
    Caching of files started

    9:23:53 PM #18 Text 0 File Burncd.cpp, Line 4182
    Cache writing successful.

    9:23:53 PM #19 Phase 25 File APIProgress.cpp, Line 273
    Caching of files completed

    9:23:53 PM #20 Phase 36 File APIProgress.cpp, Line 273
    Burn process started at 4x (5,540 KB/s)

    9:23:53 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    9:23:53 PM #22 Text 0 File DVDR.cpp, Line 1876
    Recording mode: Sequential Recording Mode for Multisession

    9:23:53 PM #23 Text 0 File Mmc.cpp, Line 20394
    Set BUFE: supported -> ON , SMART-BURN : ON

    9:23:53 PM #24 Text 0 File DVDR.cpp, Line 2017
    Start write address at LBA 0
    DVD high compatibility mode: No

    9:23:53 PM #25 Text 0 File Cdrdrv.cpp, Line 8120
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    9:23:53 PM #26 SCSI -1066 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x10C24000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    9:24:09 PM #27 SCSI -1046 File Cdrdrv.cpp, Line 1442
    SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x00CB0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    9:24:09 PM #28 CDR -1046 File Writer.cpp, Line 304
    Illegal disc

    9:24:09 PM #29 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    9:24:09 PM #30 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    9:24:09 PM #31 Text 0 File DVDR.cpp, Line 2253
    EndDAO: Last written address was -1

    9:24:09 PM #32 Phase 133 File APIProgress.cpp, Line 273
    Writing short lead-out

    9:24:14 PM #33 SCSI -1066 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 4, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    9:24:18 PM #34 SCSI -1066 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x10C24000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    9:24:18 PM #35 CDR -1066 File WriterStatus.cpp, Line 164
    Invalid field in command

    9:24:18 PM #36 TRANSFER -24 File WriterStatus.cpp, Line 164
    Could not perform end of Disc-at-once

    9:24:18 PM #37 Phase 38 File APIProgress.cpp, Line 273
    Burn process failed at 4x (5,540 KB/s)

    9:24:18 PM #38 Text 0 File AudioCompilationImpl.cpp, Line 828
    DRM: DRM burn session terminated.

    9:24:18 PM #39 Text 0 File AudioCompilationImpl.cpp, Line 857
    DRM: Closing entire DRM handling. Bye.

    9:24:21 PM #40 SCSI -1066 File Cdrdrv.cpp, Line 1188
    SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x10C24000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 10:07:32 PM

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
    jmox, Mar 21, 2006
    #17
  18. JDCIS

    JDCIS Member

    Joined:
    Jun 18, 2006
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    I ran into this using a Memorex DVD+/-DLRWL1 F16 and got the illegal Media error when I went to 16X disks from the 8X I was using before. Since 16X is all you find nowdays in printables, I figure I need to get this corrected or get another drive.

    This is not caused by BAD MEDIA as has been stated so often in these forums. I don't know for sure why a 16X disk won't work properly in a 16X Dual Layer Dual Format disk, unless it is only suppoed to be 16X for CD's and not DVD's, which may be the case. I do know that the media burns fine with Nero on my laptop which is newer, so it's not the media, the Nero software, or the files being burned. It is the drive or the firmware (I have the most current flashed already).

    Anyway, that much I know about the situation - if there are any gurus out there that know the answer I'd like to hear it. Thanks!
     
    JDCIS, Jun 18, 2006
    #18
  19. gwendolin

    gwendolin Senior member

    Joined:
    Jun 29, 2005
    Messages:
    7,447
    Likes Received:
    0
    Trophy Points:
    116
    Last edited: Jun 18, 2006
    gwendolin, Jun 18, 2006
    #19
  20. IHoe

    IHoe Senior member

    Joined:
    May 21, 2005
    Messages:
    4,742
    Likes Received:
    2
    Trophy Points:
    116
    I most certainly and whole heartedly agree with Gwendolin. Media does matter and certain media is not good for ALL drives. Just because you have the latest firmware doesn't mean that you can play/record all media! It's what the manufacture put in the firmware the will recognize the disk..... and certain disks will play/record better for certain players/burners. If you have a 16x Dual Layer writer it SHOULD play/record all the up to date 16x media.... but for some reason can't. The reason is media .... there are so many out there and then so many manufacturers that make the media ...... you would think that the player/recorder manufacturer do a better job with firmware than they do...... that's why it's important to have the latest firmware update! My drive, Philips 8631, was a bad drive when it first came out and many people who bought DELLs that had this drive before 4/2005 made DELL replace the drive with an NEC drive! I was fortunate enough to be the lucky one that had this drive that works! and been burning ever since!
     
    IHoe, Jun 19, 2006
    #20
Page 1 of 2

Share This Page