Invalid Field In Command / Invalid Track Info - PROBLEM!!!

Discussion in 'Nero discussion' started by leozingy, Sep 10, 2005.

Page 1 of 2
  1. leozingy

    leozingy Member

    Joined:
    Sep 10, 2005
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    I've had no problems whatsoever and have been burning happily with my TEAC DV-W58G, but all of a sudden it stopped recording properly. In simulation, it records without any buffer underruns. I'm using media, which has never failed me before (PHILIPS DVD-R), but now I get these msgs: "Invalid Field In Command" and "Invalid Track Info".
    Firmware is updated, media is ok, dunno what else could be wrong.

    ------------------------------------------------------------------

    Here's my NERO log:
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 2.4.2003 8:13:44
    Nero version: 6.0.0.0
    Recorder: <TEAC DV-W58G> Version: H4S4 - HA 0 TA 1 - 6.0.0.0
    Adapter driver: <atapi> HA 0
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
    Connected to MMC as unknown drive with class-nr : 1
    Drive is autodetected - recorder class: Std. MMC recorder
    CD-ROM: <PIONEER DVD-ROM DVD-116 >Version: 1.22 - HA 1 TA 1 - 6.0.0.0
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TEAC DV-W58G atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : PIONEER DVD-ROM DVD-116 atapi Port 1 ID 1 DMA: On
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 1023MB (1048048kB)
    Free physical memory: 686MB (702932kB)
    Memory in use : 32 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    10.9.2005
    UDF/ISO compilation
    21:39:30 #1 Phase 112 File dlgbrnst.cpp, Line 1818
    DVD-Video files reallocation started

    21:39:30 #2 Phase 114 File dlgbrnst.cpp, Line 1818
    DVD-Video files reallocation completed (no file modified)

    21:39:30 #3 Text 0 File Isodoc.cpp, Line 5451
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : TRUE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    21:39:30 #4 Phase 111 File dlgbrnst.cpp, Line 1818
    DVD-Video files sorted

    21:39:30 #5 Text 0 File Reader.cpp, Line 118
    Reader running

    21:39:30 #6 Text 0 File Writer.cpp, Line 127
    Writer TEAC DV-W58G running

    21:39:30 #7 ISO9660GEN -11 File geniso.cpp, Line 3814
    First writeable address = 0 (0x00000000)

    21:39:30 #8 ISO9660GEN -11 File geniso.cpp, Line 3814
    First writeable address = 0 (0x00000000)

    21:39:30 #9 Text 0 File Burncd.cpp, Line 3081
    Turn on Disc-at-once, using DVD media

    21:39:30 #10 Text 0 File DlgWaitCD.cpp, Line 224
    Last possible write address on media: 2298495 (510:46.45)
    Last address to be written: 2266783 (503:43.58)

    21:39:30 #11 Text 0 File DlgWaitCD.cpp, Line 229
    Write in overburning mode: FALSE

    21:39:30 #12 Text 0 File DlgWaitCD.cpp, Line 1688
    Recorder: TEAC DV-W58G, Media type: DVD-R
    Disc Manufacturer: MXL RG - 03
    Disc Application Code: 64, Disc Physical Code: 193

    21:39:30 #13 Text 0 File ThreadedTransferInterface.cpp, Line 757
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original CD pos #0 + 2266784 (2266784) = #2266784/503:43.59
    relocatable, CD pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2266784 blocks [TEAC DV-W58G ]
    --------------------------------------------------------------

    21:39:30 #14 Text 0 File Burncd.cpp, Line 3318
    Recorder and media-info

    =======================

    Burning to TEAC DV-W58G on a DVD-R media

    21:39:30 #15 Text 0 File ThreadedTransferInterface.cpp, Line 910
    Prepare recorder TEAC DV-W58G for write in cue-sheet-DAO
    DAO infos:
    ==========
    MCN:
    TOCTYPE: 0x0 Session Closed, CD fixated
    Tracks 1 to 1:
    TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 347713536

    21:39:30 #16 Phase 24 File dlgbrnst.cpp, Line 1818
    Caching of files started

    21:39:30 #17 Phase 25 File dlgbrnst.cpp, Line 1818
    Caching of files completed

    21:39:30 #18 Phase 32 File dlgbrnst.cpp, Line 1818
    Simulation started at 2x (2.760 KB/s)

    21:39:30 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2104
    Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

    21:39:30 #20 Text 0 File dlgbrnst.cpp, Line 1678
    Set remaining time: 28:01,592 (1681592ms) -> OK

    21:39:30 #21 Text 0 File DVDR.cpp, Line 1407
    Recording mode: Sequential Recording Mode

    21:39:30 #22 Text 0 File Mmc.cpp, Line 18119
    Set BUFE: BURN-Proof -> ON , Generic write control : ON

    21:39:30 #23 Text 0 File DVDR.cpp, Line 1522
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    21:39:30 #24 Text 0 File Cdrdrv.cpp, Line 7827
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Media Specific:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    21:39:42 #25 Text 0 File Writer.cpp, Line 318
    21:39:42.962 - TEAC DV-W58G : Queue again later (Intervall : 23msec)

    22:08:32 #26 Text 0 File WriterStatus.cpp, Line 112
    <TEAC DV-W58G > start writing Lead-Out at LBA 2266784 (2296A0h), lenght 0 blocks

    22:08:32 #27 Text 0 File ThreadedTransfer.cpp, Line 227
    all writers idle, stopping conversion

    22:09:12 #28 Text 0 File dlgbrnst.cpp, Line 1678
    Set remaining time: 0:00,000 (0ms) -> OK

    22:09:12 #29 Text 0 File dlgbrnst.cpp, Line 1678
    Set remaining time: 0:00,000 (0ms) -> OK

    22:09:12 #30 Phase 33 File dlgbrnst.cpp, Line 1818
    Simulation completed successfully at 2x (2.760 KB/s)

    22:09:12 #31 Phase 36 File dlgbrnst.cpp, Line 1818
    Burn process started at 2x (2.760 KB/s)

    22:09:12 #32 Text 0 File ThreadedTransferInterface.cpp, Line 2104
    Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

    22:09:12 #33 CDR -1066 File ThreadedTransferInterface.cpp, Line 1482
    Invalid field in command

    22:09:12 #34 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1482
    Invalid track info

    22:09:12 #35 Text 0 File dlgbrnst.cpp, Line 1678
    Set remaining time: 0:00,000 (0ms) -> OK

    22:09:12 #36 Phase 38 File dlgbrnst.cpp, Line 1818
    Burn process failed at 2x (2.760 KB/s)


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 23.8.2001 14:00:00 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    -------------------------------------------------------------------

    Please, help, anybody...

    Lenny
     
    leozingy, Sep 10, 2005
    #1
  2. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    - that's prehistoric, update to 6.6.0.16

    - hmmm, that's up to date

    - yup, Nero's not recognising drive properly

    - splat!. all i can offer at this point is to update Nero..
     
    Last edited: Sep 10, 2005
    creaky, Sep 10, 2005
    #2
  3. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    @leozingy
    Just my 2 cents to add to creaky - Invalid Field In Command / Invalid Track Info - can be a media or drive problem. Your discs mid is Maxell (mxl) which is good. So let's try the drive - try a lens cleaner or some compressed air. Maybe it's a little dusty in there and screwing things up.
     
    binkie7, Sep 10, 2005
    #3
  4. leozingy

    leozingy Member

    Joined:
    Sep 10, 2005
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    Thanx for all the help!!! Will try all the suggestions.
    Sorry, I reinstalled Nero from the original disk but didn't update anything.
    Ok, greets,
    Lenny
     
    leozingy, Sep 10, 2005
    #4
  5. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    Not a prob - post back your results - good, bad or otherwise!

    Oh and almost forgot - Welcome to aD leozingy!!

     
    binkie7, Sep 10, 2005
    #5
  6. leozingy

    leozingy Member

    Joined:
    Sep 10, 2005
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    Thanx for the welcome!
    And, well, still doesn't work. I've updated Nero to the latest version and I still get a write error. No more "Invalid" msgs though.

    -----------------------------------------------------------------

    Here's the new log:

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26.10.2004 18:35:34
    Nero Version: 6.6.0.16
    Internal Version: 6, 6, 0, 16b

    Recorder: <TEAC DV-W58G> Version: H4S3 - HA 0 TA 1 - 6.6.0.16
    Adapter driver: <atapi> HA 0
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <PIONEER DVD-ROM DVD-116 >Version: 1.22 - HA 1 TA 1 - 6.6.0.16
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TEAC DV-W58G atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : PIONEER DVD-ROM DVD-116 atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    TEAC DV-W58G F: CDRom3
    PIONEER DVD-ROM DVD-116 G: CDRom1
    =======================

    AutoRun : 0
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1023MB (1048048kB)
    Free physical memory: 671MB (687840kB)
    Memory in use : 34 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    11.9.2005
    UDF/ISO compilation
    0:45:35 #1 Phase 112 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation started

    0:45:35 #2 Phase 114 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation completed (no file modified)

    0:45:35 #3 Text 0 File Isodoc.cpp, Line 6356
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : TRUE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    0:45:35 #4 Phase 111 File dlgbrnst.cpp, Line 1832
    DVD-Video files sorted

    0:45:35 #5 Text 0 File Reader.cpp, Line 127
    Reader running

    0:45:35 #6 Text 0 File Writer.cpp, Line 122
    Writer TEAC DV-W58G running

    0:45:35 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    0:45:36 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    0:45:36 #9 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    0:45:36 #10 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2266767 (503:43.42, 4427MB)

    0:45:36 #11 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD DVD)

    0:45:36 #12 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: TEAC DV-W58G, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AE1
    Disc Application Code: 64, Disc Physical Code: 193

    0:45:36 #13 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    0:45:36 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2266768 (2266768) = #2266768/503:43.43
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2266768 blocks [TEAC DV-W58G]
    --------------------------------------------------------------

    0:45:36 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [TEAC DV-W58G] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4642340864, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2266768 | lead-out | 1 | 0x41 | 0x00

    0:45:36 #16 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    0:45:36 #17 Text 0 File Burncd.cpp, Line 4120
    Cache writing successful.

    0:45:36 #18 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    0:45:36 #19 Phase 32 File dlgbrnst.cpp, Line 1832
    Simulation started at 2x (2.770 KB/s)

    0:45:36 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    0:45:36 #21 Text 0 File DVDR.cpp, Line 2379
    Recording mode: Sequential Recording Mode

    0:45:36 #22 Text 0 File Mmc.cpp, Line 21708
    Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON

    0:45:36 #23 Text 0 File DVDR.cpp, Line 2534
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    0:45:36 #24 Text 0 File Cdrdrv.cpp, Line 8862
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    0:45:50 #25 Text 0 File Cdrdrv.cpp, Line 1286
    00:45:50.401 - TEAC DV-W58G\H0 T1 : Queue again later

    1:09:32 #26 SCSI -1135 File Cdrdrv.cpp, Line 1434
    SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x04080000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x1B 0xC6 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x0C 0x00

    1:09:32 #27 CDR -1135 File Writer.cpp, Line 311
    Write error

    1:09:34 #28 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    1:09:36 #29 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    1:09:36 #30 Text 0 File DVDR.cpp, Line 2774
    EndDAO: Last written address was 1820351

    1:09:36 #31 Phase 34 File dlgbrnst.cpp, Line 1832
    Simulation failed at 2x (2.770 KB/s)


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=86656 bytes, created 23.8.2001 14:00:00 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ----------------------------------------------------------------

    I've downgraded my firmware to H4S3 so it recognizes some maxell media, however for this simulation i've been using philips dvd-r.

    Greets,
    Lenny
     
    leozingy, Sep 10, 2005
    #6
  7. leozingy

    leozingy Member

    Joined:
    Sep 10, 2005
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    Found a dvd lens cleaning disk. Gonna try that one. Will post.
    Greets,
    Lenny
     
    leozingy, Sep 10, 2005
    #7
  8. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    Well I see one problem right off the bat! Those Philips -R
    Ugh! Probably the worst manufacturer. Which leads into this error:
    Try those maxell or pick up some Sony or Fuji (look for made in Japan)
    or Verbatim DataLifePlus.
     
    binkie7, Sep 10, 2005
    #8
  9. leozingy

    leozingy Member

    Joined:
    Sep 10, 2005
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    It works! The dvd lens cleaner did the job. Just a "hygiene problem", go figure. Thanks everybody for the help!
    Thanks, binkie7!
    Greets,
    Lenny
     
    leozingy, Sep 10, 2005
    #9
  10. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    @leozingy -

    you'll only have limited success with the utter rubbish media, and for continued success you'll need to use better media, the problem with CMC is it's inconsistent... bear that in mind or you'll be back here again..
     
    creaky, Sep 11, 2005
    #10
  11. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    @leozingy
    Thanks for posting back your results!
    Heed Creaky's advice - dump the crap media. Too many problems and headaches!
     
    binkie7, Sep 11, 2005
    #11
  12. milan24

    milan24 Guest

    could someone have a look at my problem,
    i have the latest nero, firmware. but i couldnt fix it.
    thanks in advance


    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.70 (0008), size=45056 bytes, created 2002-7-17 16:23:20
    ahead WinASPI: File 'C:\Program Files\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2005-9-25 19:11:20

    NT-SPTI used
    Nero Version: 7.0.0.0
    Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS10 - HA 1 TA 1 - 7.0.0.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <LG DVD-ROM DRD8160B>Version: 1.01 - HA 1 TA 0 - 7.0.0.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : IC35L040AVVA07-0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : LG DVD-ROM DRD8160B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prtt Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    LG DVD-ROM DRD8160B H: CDRom0
    TSSTcorp CD/DVDW TS-H552B I: CDRom1
    Generic DVD-ROM J: CDRom2
    =======================

    AutoRun : 0
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 759MB (777712kB)
    Free physical memory: 259MB (265476kB)
    Memory in use : 65 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    26.11.2005
    ISO compilation
    0:06:47 #1 Text 0 File Isodoc.cpp, Line 6410
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : TRUE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    0:06:48 #2 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 262144KB of Memory

    0:06:48 #3 Text 0 File Reader.cpp, Line 124
    Reader running

    0:06:48 #4 Text 0 File Writer.cpp, Line 113
    Writer I: TSSTcorp CD/DVDW TS-H552B running

    0:06:48 #5 ISO9660GEN -11 File Geniso.cpp, Line 3304
    First writeable address = 0 (0x00000000)

    0:06:48 #6 Text 0 File Burncd.cpp, Line 3301
    Turn on Disc-At-Once, using DVD media

    0:06:48 #7 Text 0 File DlgWaitCD.cpp, Line 277
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2230639 (495:41.64, 4356MB)

    0:06:48 #8 Text 0 File DlgWaitCD.cpp, Line 289
    Write in overburning mode: NO (enabled: CD)

    0:06:48 #9 Text 0 File DlgWaitCD.cpp, Line 2568
    Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R
    Disc Manufacturer: SONY08 - D1
    Disc Application Code: 64, Disc Physical Code: 193

    0:06:48 #10 Text 0 File DlgWaitCD.cpp, Line 456
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    0:06:48 #11 Text 0 File ThreadedTransferInterface.cpp, Line 846
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2230640 (2230640) = #2230640/495:41.65
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2230640 blocks [I: TSSTcorp CD/DVDW TS-H552B]
    --------------------------------------------------------------

    0:06:48 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1058
    Prepare recorder [I: TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4568350720, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2230640 | lead-out | 1 | 0x41 | 0x00

    0:06:48 #13 Text 0 File SCSIPassThrough.cpp, Line 34
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    0:06:48 #14 Phase 32 File dlgbrnst.cpp, Line 1724
    Simulation started at 8x (11,080 KB/s)

    0:06:48 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2669
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    0:06:48 #16 Text 0 File DVDR.cpp, Line 2469
    Recording mode: Sequential Recording Mode

    0:06:48 #17 Text 0 File MMC.cpp, Line 21541
    Set BUFE: Super Link -> ON

    0:06:48 #18 Text 0 File DVDR.cpp, Line 2624
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    0:06:48 #19 Text 0 File Cdrdrv.cpp, Line 8385
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    0:07:05 #20 Text 0 File Cdrdrv.cpp, Line 1195
    00:07:05.984 - I: TSSTcorp CD/DVDW TS-H552B : Queue again later

    0:14:33 #21 Text 0 File WriterStatus.cpp, Line 116
    <I: TSSTcorp CD/DVDW TS-H552B> start writing Lead-Out at LBA 2230640 (220970h), length 0 blocks

    0:14:33 #22 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    0:14:33 #23 Text 0 File DVDR.cpp, Line 2866
    EndDAO: Last written address was 2230639

    0:14:47 #24 Phase 33 File dlgbrnst.cpp, Line 1724
    Simulation completed successfully at 8x (11,080 KB/s)

    0:14:48 #25 Phase 36 File dlgbrnst.cpp, Line 1724
    Burn process started at 8x (11,080 KB/s)

    0:14:48 #26 Text 0 File ThreadedTransferInterface.cpp, Line 2669
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    0:14:48 #27 CDR -1066 File ThreadedTransferInterface.cpp, Line 1753
    Invalid field in command
    I: TSSTcorp CD/DVDW TS-H552B

    0:14:48 #28 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1753
    Invalid track info

    0:14:48 #29 Phase 38 File dlgbrnst.cpp, Line 1724
    Burn process failed at 8x (11,080 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.70 (0008) built by: WinDDK, size=84832 bytes, created 2002-7-17 16:20:32
    File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2005-11-16 15:10:56

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
    milan24, Nov 25, 2005
    #12
  13. milan24

    milan24 Guest

    i have tried it at 4x speed, same result
     
    milan24, Nov 25, 2005
    #13
  14. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    @milan24 -

    - update to 7.0.1.2 from here - http://www.nero.com/nero7/eng/nero7-up.php


    that's all i can see wrong in the logfile, i don't think that the Nero update is gonna help this problem... maybe try different discs...it could just be that your burner doesn't like them......
     
    Last edited: Nov 25, 2005
    creaky, Nov 25, 2005
    #14
  15. attar

    attar Senior member

    Joined:
    Jun 17, 2005
    Messages:
    11,147
    Likes Received:
    41
    Trophy Points:
    128
    @creaky

    If this is an IDE drive, how would the following be interpreted?

     
    attar, Nov 25, 2005
    #15
  16. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    @attar - not sure, i guess the only way to tell would be if you used 'image recorder' instead of a burner... i'll try it out when i get home...
     
    creaky, Nov 25, 2005
    #16
  17. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    @attar - just tried a burn with 'image recorder' ie to hard disc (i assume that's what you mean, it says this -
     
    creaky, Nov 25, 2005
    #17
  18. attar

    attar Senior member

    Joined:
    Jun 17, 2005
    Messages:
    11,147
    Likes Received:
    41
    Trophy Points:
    128
    @creaky
    Thank you ;).
     
    attar, Nov 25, 2005
    #18
  19. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    @milan24
    Have you tried cleaning your drive's lens? Sony should be some pretty good stuff but as creaky said maybe your drive doesn't like them.
    This may not help but I would turn off the simulation and just do a burn.
     
    binkie7, Nov 25, 2005
    #19
  20. milan24

    milan24 Guest

    i have tried lens cleaner, but the cleaning cd doesnt work with my dvd writer (because the music failed to play), it works with my dvd-rom. i have tried another software "Click 'N Burn CD & DVD" which burned a working dvd. however, when i use it with "display disc information" in nero, it has an option of "close disc".

    my dvd-writer fails after the writing data is 100%, which i think it is fail at the close disc or write lens out.

    thanks
     
    milan24, Nov 25, 2005
    #20
Page 1 of 2

Share This Page