Irish D Box Fix out

Out Today and confirmed working
Download in the useual places...............Paul

 

is it a nag3 fix?

 

It is a Nag2 fix, they have not gone to Nag3 yet

 

No its a 1 and 2 fix
Wait till it comes befor you fix it (3)..............Paul

 

hi paul can you tell me what i need to do to get my old faithfull dbox back working cheers

 

If your in Ireland
Download the fix
FTP Mgcam to var/bin or var/bin/emu depending on the image
And the 2 other files to var/keys
Good Luck.............Paul

 

im on comando 9.25 and do i just reset the box after iv done all that and channels come back ye

 

If you have the nov 2008 rom 7 fix in ,it will.......Paul

 

Hi,
Copied everything across to my sportster image but no joy so I threw on commando 11, ftp'ed everything across again but still no luck. Just wondering what files I should have in the var/keys directory? Is this correct:

AutoRoll.Key
Autoupdate.Key

Keylist.txt
SoftCam.Key
nagra
nagraepr10.bin
nagraepr7.bin
nagraram10.bin
nagraram7.bin
nagrarom10.bin
nagrarom7.bin

Any help would be much appreciated.
Thanks,
Chuck

 

Can anyone kindly direct me to the download locations for this fix...thanks in advance.

 

You have to exchange mgcamd in var/bin or var/bin/emu depending at your image and chmod 755. Before you can do this you have to switch to a other emu and after you are ready you can switch back to mgcamd.
Beside that its a good idea to upload priority.list from the fix3 package to var/keys.

 

hi mgb cheers 4 all ur help and pauls can u do a quick step by step the parts i dont get are how to switch to a dif cam and how to do the 775 bit iv ftp,d the files to the right place and iv changed active softcam to mgcamd and then rebooted but still no joy

 

Your image should offer a submenu where you can choose the active emu.
Your ftp program offer the possibilty to change file permissions and you have to set the rights for mgcamd to 755 or 777.

 

Message sent ...........Paul

 

hi guys cant find were to change it to 775 im using cute ftp8 please help i want my beloved dbox back cheers

 

got it done cheers guys 4 all the help

 

Well post how,So as to help those that follow .................Paul

 

well first turn off your cams
then hook up ur dbox with ur ftp client
then look 4 the var/bin file and put the mgcamd file in there then right click on it and go to propertys and change the attributes
And change the numbers to 755
then go to the file var/keys and drop the other tree file,s in there
then go back to softcams and turn it to mgcamd then reboot ur box and enjoy hope this helps

 

Good job mate ...........................Paul

 

Looking for suggestions on this problem

Have a dbox with Kein System error which was obviously flashed with a 2x image when it should have been 1x (Sagem box). but I cannot get it to flash using IFA. Leads are all ok etc. as I flashed a Nokia no problem with them, but cannot get this one to flash at all.

EDIT: Got It Working, the trick was to unplug it before the Kein System message came up on the LCD and plug it in again quickly, then the flashing went ahead with no problems, just in case anyone else comes across this type of problem!!