I WAS UPDATED MY DOBX 2 sagem. WITH SPORTSTAR 2x image. I MUST HAVE USED THE WRONG IMAGE. THE SYSTEM CAME UP WITH kein system. IS THERE ANY WAY THAT I CAN GET MY DBOX2 WORKING AGAIN OR IS JUST BROKEN FOR GOOD. I THINK I SHOULD HAVE USED SAGEM 1X IMAGE. OR COMMANDO6
thanks for that but it wont work as it wont communication with the box. i am trying to communication with the box but i am getting nothing. is there anything that i can do. thank karl.
Download flashing assistant mate.. http://www.dboxservice-hallenberg.de/freedownloads.php read the tutorial at http://www.hackable.cc/forum/showthread.php?t=13226&highlight=flashing+assistant If you have tried flashing assistant and the screen on your box is still blank, uninstall as it send data back to your PC and install it again and it will work
If you know the ip address, then use a x-over cable, just make sure your pc / laptop that you are using to flash the dbox is on the same subnet mask. For example: dbox ipaddress is: 192.168.1.100 subnet mask is: 255.255.255.0 laptop / pc ipaddress is: 192.168.1.101 subnet mask is: 255.255.255.0 Make sure you disable all firewall and virus software (Norton, McAfee, etc). If you are using windows XP, disable the Windows firewall through the control panel. Power down the dbox Connect the x-over cable to the laptop and dbox Run the Image Flashing Assistant Select the correct image (2xI) Make sure you select the correct network adapter and click next Click on OK and then power up the dbox LCD on dbox should display Flashing... After about 10minutes, LCD should display "Flashing done!" Cliick OK on the IFA program, remove the x-over cable, power off and power on the dbox You should now be able to do a scan for all channels. Let us know how you get on. Good Luck! Alisha x
I had to re-flash an dbox using IFA , what you need 1 - PC 2 - Image file for your box 3 - Cross over cable 4 - cup of tea and coffee what you need to do is as follows 1 On PC set network card settings to 10 mb half 2 On PC set static IP of PC/laptop to 192.168.3.10 and subnet 255.255.255.0 3 - Disable Firewall/Anti Virus on PC dont worry about the DBox IP Address as IFA will use ARP to assign an IP Address (remember when you get a keine system you network wont start up network thus no IP address can be assigned to the DBox) here we go.... -power down the DBox -connect PC and DBox with cross over cable -start up IFA select your Image and the network card of your PC -when the message window appears in IFA informing you what to do - click OK - fire up the DBox on the LCD you will see it erasing and flashing the image when the message FERLUG appears on the LCD of the DBox all done - FERLUG means Ready Drink your tea or coffee - this will take about 10 minutes unplug cross over cable from dBox and reset via the front panel buttons. and voila one working dBox still having problems, email me at admin@netwave.redirectme.net
IFA uses ARP to assign an IP address to the DBox - as the box is knackered the network can not be started therefore no IP Address can be assigned to the box that way, ARP allows you to talk to the dBox via the MAC Address of the network card of the dBox and IFA thus assigns a IP Address to the MAC Address.
thanks for all the advise, i have got to the next step. it keep coming up Error Channel Not Available. I am thinking that i might have the wrong software. i thought i had the new commando 6. but maybe i got the wrong one or maybe i didn't get the wrong one
am having problems too, cant find channels, selected my area using sagem dbox2 with sportster, tried to reflash sporster and also commando but IFA wont kick in, reinstalled it but still not working, it appears that sportser cant be overwritten or its locked???? Please help!
i had a sagem earlier on tonight what could not be updated via IFA had to update manually through the box worked well though
i have done the scan and still nothing. what could be the problem. only one statiion has come up on it and that i think it is a free station.
send me a pm karl1234 and il send ou a working image all you have to do is plug and play...let me know if its a 1 or 2 chip box
Got IP address but cant connect to the box via FTP, there is no default gateway? Do u mean do it via Flash Assistant
Whenever you get channel not available after flashing or rescanning you need to reset evocamd. Using sportster image go into Sportster Menu then EMU selection menu BLUE/OK/GREEN/OK or BLUE/OK/YELLOW/OK Then reboot with power off and channel up buttons held at the same time for about 4 secs until lcd goes completely blank (buttons on dbox not remote)
