how do you jtag a euro voxmaxv have got kit but cant open files any way i can get round it i aint got a clue what to do i was used to big spanners and hammers thanks
Did it not come with instructions as well as files required. Are they in zipped/winrar format? BTW why are you jtagging it?
they came with a cd it says bin file reason trying to jtag is its as dead as a dodo caps checked out ok no instructions there power going to box but nothing is lit up cheers
OK if caps and PSU are fine, heres what you need and how to do it. Connect JTAG and Power up EuroVox Start JKEYS Click on "Development Panel" Click OK to ingore the warning. ** SEE BELOW IF YOU GET AN ERROR HERE ** If all goes well you will get into the development panel. In the user functions box: Type in the address: 80000000 Click on "Load to . . ." Select the file "unlock_28FxxxC3.bin" Click "Trigger User" Close the current window. Click on "Flash Programming" Choose the model number as: DXD426RD (1 Chip-GLA) In the section on the right: Leave the box above set to "Full" Click "Erase" Select YES. This will take a minute to erase. Click on "Program" Select YES to "Program at address 0x7FE00000, size 0x200000?" Choose your TSOP file Sit and wait for OK to become active, then click it. Close JKEYS and power the box down. Disconnect your JTAG Power the box on. If all has gone well then it should boot up ready for you to rescan for your channels. *** If you get an error trying to get into the devleopment windows **** Power the box down and run SkyMax v2.2 Power the box up Press start. This seems to reset the box when JKEYS cannot connect (DCU errors). Close SkyMax and start JKEYS and try again. Personally I went with Skymax first and then jkeys as it seems to work better. SkyMax 2 http://www.mediafire.com/?8fzumnj1k9g Jkeys http://www.mediafire.com/?e9dyyzgn8q3 Max V TSOP http://www.mediafire.com/?5dd11z2djmw Use SunRise's method above for the INTEL chipset and the black tsop to bring your MaxV back to life. The usual SkyMax method will work for ST chipsets.
Use the parallel port on the back if you have one. However I recommend if you can, borrow a PC with XP. I haven't tried it with Vista and am not sure of compatibility issues.
where do you putgreen wire with aligator clip it does not tell where connections go in box know im a pain in the ASS but thats when you dont what doing learn by my misstakes thanks again
dickhead again what does a VCC diode look like it was ships engines i used to build not titchy things like this thanks sgain
thanks scOuse you are one of the best next time your in Greenock I will get you a pint going up to nephews now to use his comp
any idea where i can get a usb to parallel cable know im a pain in the ass nephew aint got a parallel port either one i can use with Vista thanks once again
