Jungle Flasher Tutorial for STOCK 74850C Lite-ON (pictures included)

If you purchase the CK3 probe, you must get the connectivity kit whether it be the PRO or Lite. Personally, if you plan on doing more Lite-ONs, the connectivity kit and probe will pay for themselves. Plus, it is always nice to power the drive with a connectivity kit, rather than the XBOX 360.

Bhetrick has a nice tutorial on how to create a Lite-ON key reader. It is in the Ultimate sticky at the top of the page.

 

I followed the steps and got the exact results that were posted. However when I test the drive it doesnt recognize any disk. Any help would be appreciated.

 

What is the error message? Open Tray?

 

I am sorry for not giving enough info. I followed the tut. and all my results mirrored the tut. Once I tested the drive i put in a game and it said reading dvd, and then went directly to the screen that just says XBOX360. I powered the system off and tried a differnt disk to no avail. I then tried a retail disk which did not read either.

 

Make sure you have a valid DVDkey. What does it look like?

 

leerage when i conect the hardware(vt6421a) do i connect the sata cable provided to the opened dvd drive?

 

how do i power the drive from my 360? do i neeed to remove any cables

 

The drive needs to be connected as it normally is. With the exception of your SATA cable from the 360 to the computer.

 

yes leerage thx for that but i read it somewhere that if i leave my av cables on the xbox i will get bricked?
so i will flash my lite on without a ck3 pro but only using a ck3 probe? is that possible enough and where do i connect the probe sata to where from where?

 

Yes, you need the AV cable plugged into the XBOX 360. If you are using the CK3 probe, you must use the connectivity kit in conjunction. If you don't feel that you would ever use the CK3 hardware again, and don't want to spend the money on it, send me a PM and I'll do it for you.

 

yh the thing i live in the uk and i think you live in the states?

 

Yeah that would be a problem.

Well, if you get the CK3 probe, you will need to purchase either the Lite or PRO.

 

so if i solder the r707 and r808 do i need ckr probe and pro? at all and if no then how do i solder

 

http://beta.ivancover.com/wiki/index.php/Xbox_360_Lite-On_DG16D2S_Extract_Key

 

that guide is wierd your guide's much better i think i may aswell buy a ck3 pro + probe + xt adaptor + unlock kit for £37.95

 

If you have friends with Lite-ONs, you will easily make back what you spent on CK3 PRO + Probe. If you got a set of small straight screwdrivers, you won't need the unlock kit.

 

true but it's always a good thing to have spares and plus i could get £41 back within 1 hour dont you thing because people want thier lite on's flashed

and their normal 360's back

 

Definitely, if you know what your doing, you can definitely make your money back. People tend not to want to do the Lite-ON themselves because of the initial cost of the hardware, or making the hardware.

 

ueah true but then again your guides here aswell and how come i need to rename my lite on repack?

 

To take advantage of the autload feature, the ix1.6 bin for Lite-ON must be named

Code:

ix16-liteon.bin

If it is ix16-liteon-repack.bin, Jungle Flasher will not find the ix1.6 bin for Lite-ON.