Jungle Flasher Tutorial for STOCK 74850C Lite-ON (pictures included)

Yeah the link for the connectivity kit is http://www.easymg.com/game-console-...lderless-lite-on-dvd-key-extractor-combo.html

(Does not have an alligator clip)

And on the Tiao tutorial it is only referring to the 83850c drive not the 74850c,don't know why this is!!

Im guessing that the flashing method is the same or similar for both drives??

 

The flashing method is the same but getting the DVDkey for the drives is different. If you follow my tutorial with your 74850C you should be fine.

 

Sweet,so the method is the same basically!!Is it that you have to use the serial connector with 83850c and usb with 74850c?just for future reference!!
Kool well i hope everything goes alrite!!

 

With the 74850C, you have to use serial or USB via the probe/spear. With the 83850C, you can dump the encrypted DVDkey via SATA.

 

hey leerage. I got the probe and ck3 lite..but I dont know how to hook up the cables and when to hook up the cables..Can you tell me when exactly to hook up what cables..I can see the pictures but Im confused as to when I hook up what cables. Im guessing at the beginning its the green cable to power the drive and the sata cable to my pc on board one to the xbox drive..but after that im confused...

 

Dealing with the probe, it is attached to one end of the DVD drive power cable. That end will need to go into the drive. The end that has nothing connected to it, will go into the connectivity kit.

 

should the light be red or blue?

 

On the CK3 dvd connectivity kit, it should be blue which is normal mode. Red is debug mode and that is to put Hitachi 59s and lower into Mode B. Your probe will have a blue light and when you go to probe the R707 hole, you will get a green light which means you have a good connection.

 

thank you..when i get to the extracting it..it says everything looks okay..then i save the key bin inquiry and dummy.....but then it says dummy.bin is missing some drive specific information...it says for some newer drives this info is blank by default...what do i do?

 

Go ahead and fix the info. Open up your Lite-ON drive and look at the bottom side of the laser and inside the PCB board. There are white stickers that contain the information it is asking. Fill in the missing info and save. Then load the corrected dummy bin and spoof the info to iXtreme 1.6. Erase and flash from there.

 

so i didnt do that and then i erased the drive and did not get good properties i guess.... it says its in vendor mode and i did a quick switch of the off on switch to where the led went out and went back on but it says name unknown and size n/a type: is blank....i have the keys..can i restart over? or do i just flash the firmware...the dvd keys matched up on firmware tool...please help!!!!

 

nvm got good properties now...

 

Did you get the firmware flashed?

 

I was told all I needed was this:

http://www.newegg.com/Product/Product.aspx?Item=N82E16816124011

I just got it today and just opened my xbox and now I find out I need some thing called CK3? I ABSOLUTELY need that?

 

What firmware version do you have of the Lite-ON?

74850C = Probe
83850C = No probe

 

I have 74850C. Where can I buy whatever else I need? Thanks for your help.

 

yeah leerage it worked...i did not give it the information it wanted...i just did not click the ck3 lite on off fast enough..i waited a second and then did it and that didnt work..then i did it on off really fast and it did andi got good properties and the person i did it for is very happy

 

once i remove the .sys file i can never get my card to work. can i just iprep once the drive is found.(dumped fw and went to erase and got the freeze) spent like an hour before i got it to read, then it froze so i removed and no can find now?

 

like 2 years ago i flashed my samsung ms28 drive and LOVED it! then like 3 months later rrod....then then half ass went about fixing it and screwed it up even more so i said screw it.... well, 2 years later i'm proud to say that today THANKS TO THIS TUTORIAL i have successfully flashed my lite-on 74850c. I get to play all my old burned games from like 2 years ago!!! your the BOMB MAN!!!!! GREAT TUTORIAL!


P.S....followed the tut to a tee went to go try the game, but it didnt read a retail game or my burned game, so turned the console off was ABOUT to unhook it. then i said lemme try one more time...so i turned it back on and the retail disc that was in there started working and then i tried the burned 1 and it worked. apparently i just needed to power cycle it.... GR8 TUTORIAL ONCE AGAIN!!!!!!

 

Thank you. Glad you got it flashed.