Jungle Flasher Tutorial for STOCK 83850C Lite-ON (pictures included)

It does the same thing again here is the log

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.66 Beta
Session Started Thu Oct 01 16:39:38 2009

This is a 32 bit process running on 2 x 32 bit CPUs
PortIO is installed and running.
Found 10 I/O Ports.
Found 1 Com Ports.
Found 5 windows drives C: D: E: F: G:
Found 2 CD/DVD drives E: F:

Sending LO83info request to I/O port 0x0970

............
................
0000: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0010: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0020: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0030: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................


LO83info extraction Failed!

 

You will probably need to get the VIA card then. It has been proven to work.

 

wiard though i have done 2 before that ...what is the via card u have one u can suggest me

 

Any VIA SATA card with the 6421 Chipset. Just google VIA 6421 SATA card.

 

thanks dude

 

when i install that card, i uninstall the portio32 files and install the VIA card or how does that work

 

Do we have to delete both the files "viamraid.sys" or "vsmraid.sys". I know its says 'Or' so just need to confirm

 

i really need help bad...i think i did the open tray thing right here is my log..BUT HERES MY PROBLEM(SCROLL DOWN0


Sending LO83info request to I/O port 0xDCE0

........................
.....
0000: 49 6E 20 44 65 64 69 63 - 61 74 69 6F 6E 20 54 6F In Dedication To
0010: 20 54 68 65 20 42 69 72 - 74 68 20 4F 66 20 4D 61 The Birth Of Ma
0020: 63 6B 61 79 20 4F 6E 20 - 46 65 62 72 75 61 72 79 ckay On February
0030: 20 54 77 65 6C 76 65 20 - 32 30 30 37 20 FF FF FF Twelve 2007 ...
0040: FF FF FF FF FF FF FF FF - FF FF FF FF FF FF FF FF ................
0050: FF FF FF FF FF FF FF FF - FF FF FF FF FF FF FF FF ................
0060: 96 B4 3F 0C 0F 70 EA 32 - F4 8E 27 FD 2B 39 3F FD ..?..p.2..'.+9?.

0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS
0010: 44 47 2D 31 36 44 32 53 - 20 20 20 20 20 20 20 20 DG-16D2S
0020: 38 33 38 35 30 43 41 30 - 41 32 44 36 30 39 43 47 83850CA0A2D609CG
0030: 39 32 32 38 31 34 30 30 - 51 34 39 20 20 20 00 00 92281400Q49 ..
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

Inquiry String saved to C:\Documents and Settings\Administrator\My Documents\new\Inquiry.bin

0000: 44 36 30 39 43 47 39 32 - 32 38 31 34 30 30 51 34 D609CG92281400Q4
0010: 39 20 20 20 FF FF FF FF - 39 45 31 38 31 31 30 33 9 ....9E181103
0020: 31 36 44 38 31 34 58 58 - 41 30 FF FF 53 34 50 39 16D814XXA0..S4P9
0030: 35 32 31 30 30 30 30 30 - 30 33 38 32 38 31 00 00 52100000038281..
0040: FF FF FF FF FF FF FF FF - FF FF FF FF 41 32 FF FF ............A2..


Extraction file saved to C:\Documents and Settings\Administrator\My Documents\new\D609CG92281400Q49.bin





NOW IT SAYS FIRMWARE TOOL 32 IS SUPPOSED TO AUTOMATICALLY POP UP AND LOAD SOURCE OR SOMETHING LIKE THAT..IT DOESNT DO THAT..SO I TRIED TO LOAD SOURCE FIRMWARE MYSELF AND GOT THE ERROR "FIRMWARE SHOULD BE 256KBYTES" MINE IS 288KBYTES...ANYBODY KNOW WHAT I DID WRONG WAS IT THE OPEN TRAY PART?...AND ALSO WHEN I CLICK GET KEY CREATE DUMMY BIN I GET THE ERROR "SERIAL IS BAD"..I HAVE BEEN TRYING TO GET THIS TO WORK SINCE 6 OCLOCK TODAY AND ITS 11:32 SO PLZ HELP!!..

 

I ALSO SEE THAT IT IS SUPPOSED TO ASK TWICE TO OPEN THE DRIVE HALF WAY AND ALSO TWICE TO OPEN IT FULLY..IT ONLY GOES THROUGH ONE FOR ME AND THEN ASK ME TO SAVE AND I ONLY GET TO SAVE TWO FILE THE INQUIRY AND D609CG92281400Q49.bin...ANY THOUGHTS OR IDEAS OR ANYTHING??? IM STUCK AT THIS POINT...

 

Thanks Leerage for the great tutorial. I followed it step by step and even this newb was able to get it flashed.

Only thing that was a little confusing was the tray half open. The jungle flasher writeup mentioned to open the tray, close the tray, power off while closing it and move it to the half open position.

That threw me off a little but i followed your method of just opening it, pulling the plug and then moving it to the half open.

The following step of full open, i just hit the eject button until it fully closed and opened.

It would have been a little tricky to unplug it while closing without the connectivity kit.

Anyways, thanks again!

 

ok Leerage..forget all the stuff i posted before i got passed that..i had jungle flash 1.65, it worked for me on 1.66...now when i go to erase the drive this is what i get...and now the xbox power light wont stop flashing green and i cant eject the drive..what am i doing wrong?

Sending Lite-On-Erase request to port 0xDCE0
..............
Drive returned Status 0x0
....................
Device Intro failed!

 

Go ahead and click LO83 info. When using the 360 to power the drive, go ahead and eject the tray. Pull the power cable from the DVD drive and push the tray half way in. Plug the DVD power cable back in and click OK. It will prompt you to eject the tray fully. So press the eject button to close, then press the eject button again to get the tray fully ejected.

Source:leerage tutorials

 

Well my last falcon 360 only lasted me about a year... so i went and plopped down the cash on a new arcade unit. Dunno which version i have, i hope its 83850c... the only part that worries me about this process is the possibility of getting a bad key. You state to flash another drive to test but i dont have one to try on... how common is it to bork a lite-on flash? Ive successfully flashed 2-3 hitachis and a benq so far over the past few years. errr. Scared. haha

 

Hi, I have flashed a few 8385c before. But this one I have now is giving me non stop trouble. I'm not using a kit. I'm just power cycling by removing the dvd power supply. I keep getting

Sending LO83info request to I/O port 0xDF60

............
................
0000: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0010: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0020: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0030: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................


LO83info extraction Failed!

I've been reading that to get it to the full open position you press the eject button and it'll close then once again to open it. Mine doesn't do that. I hit the eject but and from the half open position it just opens. I've tried over 30 times now. I manual pulled it to the full position like I use to do with the old ones I did. Any ideas guys? This is starting to frustrate me. LOL

 

Naser075 and LiquidKil: Can you please confirm for the me the manufacturer date of your Lite-ONs? Seems there is a second 83850C being produced that won't allow the key to be dumped!! This could be your issue!

 

damn i gave it back but i know for a fact that they are different version. My friend is a pro in this and i send the drive i could not flash to him and he could not do it either. SO FOR SURE THEY HAVE A NEW VERSION OR SOMETHING I WILL KEEP AN EYE OUT FOR THE NEXT TIME THOUGH.

I did go trough BIOS and got key 140F0F1011B5223D79587717FFD9EC3A. I know it is a bad key what do i do if i get this key. remember please i have a ck3 tool

 

You will need to wait until the firmware team figures out how to obtain the dvdkey.

 

Model: DG-16D2S-09C
HWVer: A0A2
FWVer: 83850C
Manufactured: July,2009

 

@LiquidKil
this is my drive
dg-16d2s09c
h/w a0a2
f/w 83850c
july 2009
it can be flashed
hincey sorted out my drive
my problem was my onboard sata ports (nforce)
you need the via 6421 sata card