Jungle flasher wont find my drive

I´ve tried all different sata ports, except the one my hard drive is attached to. im using xectuer connectivity kit V3 lite with probe, ive tried powering and powering off the drive pushing the drive half way in and so on, nothing, jungle flasher gives me this when i start it
"
This is a 32 bit process running on 2 x 32 bit CPUs
PortIO is installed and running.
Found 7 I/O Ports.
Found 1 Com Ports.
Found 6 windows drives C: D: F: G: H: I:
Found 0 CD/DVD drives
"

 

should i delete that raid controller?

 

It shouldn't be anything to do with that and it doesn't show as a cd/dvd drive. If you scroll through the ports does your hard drive show up?

 

No, it dosent, but it does show up in the start entry
"
This is a 32 bit process running on 2 x 32 bit CPUs
PortIO is installed and running.
Found 7 I/O Ports.
Found 1 Com Ports.
Found 6 windows drives C: D: F: G: H: I:
Found 0 CD/DVD drives
"

its C:, and D:

 

Then that means JungleFlasher isn't finding the right ports where your drive is connected, there might be a conflict so uninstalling something might help. Try uninstalling that if you think it might work then restart jungleflasher.

I'd ask if it shows in the bios but likely your computer will keep freezing with the lite-on connected.

 

Try uninstalling portio32 and reinstalling the portio32 that came with jungleflasher manually, worth a try.

If you don't know how to do it manually:

* Open "Control Panel", in the search box type "hardware".
* Under "Device Manager", select "Install drivers for older devices with Add Hardware wizard".
* Click Next button
* Select "Search for and install the hardware automatically" and click on Next button
* Select "Show All Devices" and then click Next.
* Click on "Have Disk..."
* Browse to the PortIO32 folder and select the portio32.inf
* Click Next to start the installation

 

If i delete that raid controller that wont help anything? is there any link for a compatiable sata connector cheap?

 

If jungle flasher can see my hard drive shoud it not then be able to see my lite-on drive? no help trying to uninstall and install port I/O 32 and ive tried all the different sata ports, and i guess i could mention that my computer keeps freesing up with that attached!

 

The drive comes up even at bios. reinstalling port I/O wont help, turning the drive on and off with jungle flash wont help, trying different sata ports wont help, i have all this shit rigged up, serial cable to a com port, xecuter V3 lite kit on the drive with a probe, what gives?

 

got it to work by the way. Settings in bios were wrong

 

What did you change your bios settings to? I am having the same issue but not sure what to change to.

 

yea im having same problem 2, what did u change in bios settings...