Discussion in 'Xbox 360 - Modding & Hacking' started by melton69, Apr 12, 2007.
just got a xbox360 need 2 know if i have 2 chip it 2 play copey games
You have to flash the firmware. ....You can only do that with a Hitachi or Samsung drive (not the Benq). ...Here's how to find out which drive you have by the tray....
so if its 1 of them am ok 2 do it mate ps thx for help
this has been covered in great detail many times if you look through the posts you will find all you need to know in no time
Only if it's the Hitachi or the Samsung.
do i have 2 take my xbox apart 2 see what hard drive i have
Just eject the drive to see which one of the pics it looks like (the actual tray bit)
then once you know that you will need to take the box apart to see what rom version you have.
it says ITP-1-1 IS THAT THE RIGHT 1
"it says ITP-1-1 IS THAT THE RIGHT 1"
you are most likely not looking at the correct thing.
could you tell by the DVD drive tray which it was, that is step #1
Compare your tray (the pop holder) to the pictures that Sandwich1 posted. Then you will know which drive you have.
YES GOT THE HITACHI YER BUZZIN WATS THE NEXT STEP BOYS LOL THX FOR DOING THIS
There is a tut in the above stickies.
unfortunatly the next step is opening it and figuring out which model. do not get too excited as there is one model Hitachi that is not yet flashable (Hitachi 0079)
then after that here is a good guide on flashing it, you may want to either get a connectivity kit from Xecuter or Xeno, or even their new products. The new products are the Xeno Top Gear, and Xecuter Blaster 360. Both of which you open the case and install and then you will never have to open your case again to flash it. With a connectivity kit you have to open it every time there is a new flash you want.
hopefully your PC has SATA ports with a compatible chipset to flash it, if not you can get the Xecuter USB connectivity kit and do it through USB if you have the HITACHI-LG GDR-3120L
ok thx for the help lads thx very much
Separate names with a comma.