just killed my starview1 need help

Hi just flashed my s..view1 with firmware for s..view2 the box. Now it won’t take any other downloads to reverse what I’ve done. This was an accident I wasn't trying to be clever. If anyone can help would be grateful.
Rgs peterw

 

You basically have one of two choices ...

1. send it off for repair or JTAG'ing (there are a few people who know how to do it in the forum)

2. buy a new one and stop tampering with it >)

 

tks m8 wasn't the news i was hopeing for but if thats it (thats it ) lol. If you can pass on contact for repair would be greatful. Rgs peterw

 

By the way I'm in dublin so if there is someone local it would be great tks again

 

All you need to do is download the correct firmware for your SV, just make sure you don't put genuine firmware on a clone.

Connect your pc to your SV, as normal. Make sure the SV is turned off at the power switch on the back.
Now, fire up gtrom, select your bin file, click on the download button, wait a second or two, then turn on your SV at the power switch. The download should start. If you're lucky it'll work first time. It it doesn't, try again, from the start. It may take you a few goes, but it should go eventually.

 

better news eamo32 tks a mill

 

eamo32 beat me to it lol

 

eamo32 worked after several attempts waited about 10 secs in the end done the job fine thank you again. I have one other question if i can be so bold. From reading the posts I see there is a cure for the autoroll which seems to be (CryptStar-v1[1][1].4-GenuineOnly) is this the correct file. ( how you keep up with so many questions in so many threads is beyond me, but the work you do and of course everyone else involved is great and I dont think you get enough thanks for it. ) So from me a very big thanks again and again.
With thanks Peterw

 

That file is for genuine SV only, do not put it on a clone.
Check the vents on top of the box to tell what you have;
First Generation = 13 x 7 vents
Genuine = 25 x 7 vents
Clone = 18 x 7 vents

If you have a clone, use the 2.57eE_FIXED firmware. Both this and the CryptStar one can be got from the link at the end of my post, the eko site. They are in the Starview / Firmware directory.
Just make sure 100% which model you have before downloading. The 2.57 will no longer autoroll, and as of yet, despite what some posters have said, there is no new firmware available yet to make SV clone boxes autoroll.

 

thanks eamo32 now have my starview autorolling again what a great forum to hang out in lol cheers again

 

Glad you got sorted.