hi sounds like youve loaded the wrong type of image IE a 1* image on a 2 chip box or a 2* image on a 1 chip box , you will need to get a prog called dboxmanager and the right image for your box , and ftp the image on to your box it should run ok after this.
what you need is the following cross over cable copy of dbox image on PC cup of tea/cofee ok lets start... firstly switch off the dbox disable any firewall and anti-virus application on your PC set the IP Address of your PC to 192.168.3.10 and subnet mask to 255.255.255.0 - leave DNS and Gateway empty now install IFA to the folder c:\IFA - no spaces in the folder names as IFA doesnt like spaces in folder name. connect cross over cable from PC to DBox fire up IFA on your computer locate the image you want to flash onto the box select your network card click Start or OK or what ever button its called now it will display a Window with usual stuff click OK now turn on the DBox it should say on the LCD IFA and other stuff.. nearly their... it will start to flash the new image drink tea/coffee as this will take about 10 minutes dont worry about IP Address of the DBox, as IFA uses ARP to assign a IP Address to the box once done - a message like FERLUG will appear on the DBox LCD 0- unplug cross over cable from dBox and restart still stuck email me at admin@netwave.redirectme.net
another tip for anyone needing to ftp their dbox , i use opus file explorer ,far superior to windows explorer , and it has built in ftp, and works flawlessly with the dbox ,just click on the dual screen and i have my dbox folders in top half of screen ,and my pc drive in the bottom half of the screen
